5R Series Tractors | Digital Corner Post Display
Command Center
The digital Corner Post Display features state-ofthe-art electronic instrumentation, eliminating the instrument cluster that once surrounded the steering column. The Corner Post Display not only increases forward facing visibility but also allows you to make quick adjustments to hitch, transmission, hydraulic, and engine settings.
The following information is included in the display: Engine rpm (engine speed) Fuel-level gauge with low-fuel warning Diesel exhaust fluid (DEF) level indicator Engine temperature gauge Power take-off (PTO) engaged indicator Range information (F, N, R, P), transmission range and gear indicator Gear and AutoMode indication Ground speed Target speed (in AUTO mode) AutoTrac™ Field cruise Differential lock indicator Mechanical front-wheel drive (MFWD) indicator Turn signal and hazard indicators High-beam indicators Timer for cold starting Creeper indication (if equipped) iTEC™ system indication (if equipped) Stop, service, and information alerts Exhaust filter cleaning indicator
14
With the new Corner Post Display, you can opt for iTEC™ Basic – Intelligent Total Equipment Control – to be factory-installed, simplifying several operations into one. iTEC Basic can be programmed to automate the PTO, MFWD, and differential lock functions. When engaged, it operates with the raising or lowering of the 3-point hitch – aiding in tractor and implement coordination. As the hitch is raised, then lowered, the system coordinates the tractor with the implement to operate correctly for the next pass – increasing both accuracy and efficiency. The Corner Post Display comes with the base equipment package. The guidance screen is included with factory installed AutoTrac.
