CLIMATE RESPONSIVE ARCHITECTURE INTEGRATING CLIMATIC CONSIDERATIONS AS AN PART OF PLANNING AND BUILD

Page 72

Climatic responsive architecture: Integrating climatic considerations

52

as an part of planning and building design

3) Machu - (Attic Space or Loft) In addition to these roofs which is mentioned above, there is a loft of height about 3’ to 4’ called as ‘machu’ (a structurally stable false ceiling). The machu is shown in Figure 3.17. This was usually adopted in the traditional houses, especially in the Chettinadu region. The majority of dwellings have false ceiling designs to reduce heat intake throughout the day. These are normally constructed below the sloped roofing or below the lean to roofs or in the areas of passages and rooms. These are supported by the wooden beams that run through horizontally which connect the rafters as a tie member. This reduces the heat transfer significantly and acts as an air trap, and this construction technique can very well be considered as a good passive cooling construction technique. The dimension of the machu is 7’ at its ridge and 0’ at its eves, the machu is normally used as a store for the old or used and unwanted household items. It has a door way of about 5’x3’ size. 4) Rain water collection techniques Every house collects water from the courtyard and it is properly channelized in the streets so as to lead all the storm water into the public pond. This is an amazing town planning system which is 200 years old and in addition the stone posts have been extensively used in both interior as well as exterior. Stone is a thermally resistive material and also sustainable material.

Figure 3.18 - All Chettinadu residences have a rainwater collection system. (Source – Assessment of the climate-responsive architecture of traditional houses by Radhakrishnan S.)

KARTIKEY BHATT 17EAHAR012

2021-22 SOA, AGI


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Figure 3.46 - Main entrance of the wada

12min
pages 91-112

Figure 3.45 - Section of Wada house

0
page 90

Figure 3.43 - Hubli, Karnataka

1min
pages 87-88

Figure 3.28 - Initial design of the hamlet

0
page 81

Figure 3.18 - All Chettinadu residences have a rainwater collection system

1min
page 72

Figure 3.19 - The door jamb with stone edging

1min
page 73

Figure 3.17 - Flooring and ceiling

0
page 71

Figure 3.27 - Nalanchira, Trivandrum, Kerala, hamlet map

1min
pages 79-80

Figure 3.16 - Streets & arrangement of chettinadu residence

2min
pages 69-70

Figure 3.15 - Typical view of chettinadu residence

0
page 68

Figure 3.14 - Plan of conventional chettinadu residence

1min
pages 66-67

Figure 3.6 - Shaded windows with roof Projections

1min
page 58

Figure 3.2 - Typical rural houses, Figure 3.3 - Typical dwelling

1min
page 55

Figure 2.12 - Depicting some aspects of wind flow in and around courtyards

3min
pages 46-48

Figure 3.1 - Map of Pippara Village with grid iron street pattern

2min
pages 53-54

Figure 2.10 - Single sided ventilation

0
page 44

Figure 2.11 - Cross ventilation

1min
page 45

afternoon sun rays

0
page 42

Figure 2.9 - Wind pressure induced and temperature induced ventilation

0
page 43

Figure 2.7 - In a warm and humid climate, window building processes are different Figure 2.8 - In a humid climate, shading (Chajja) and shutters on the veranda prevent

1min
page 41

2.2.3 Settlement pattern and site planning

1min
page 38

2.2.4 Envelope design

1min
page 39

Figure 2.2 - Air speed are greatest on the crest

0
page 28

Figure 2.3 - Wide east-west streets maximize the scope for south winter sun

3min
pages 29-31

Figure 2.1 - Map of India indicating the 5 climatic zones

0
page 26

chimneys

1min
page 40

Figure 2.4 - Wind catchers

0
page 32
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.