NEW PRODUCTS
Ultrasonic liquid flow meter The Badge Meter Dynasonics TFX-5000 ultrasonic clamp-on flow and energy meters are now available from Bell Flow Systems. Designed for non-invasive, ultrasonic transit time flow measurement of liquids, the flow meters are suited to use in water and wastewater treatment, HVAC and oil and gas applications, offering a versatile solution for measuring volumetric flow and heating/ cooling rates in clean liquids as well as those with small amounts of suspended solids or aeration, such as surface water or raw sewage. The flow meter is available in a variety of configurations and can be selected with features suitable to meet particular application requirements. Because it clamps onto the outside of pipes the ultrasonic device does not contact the internal liquid which offers the advantage of reduced installation time and cost, no limits on pressure or fluid compatibility. The meter is available as a flow meter
Industrial wireless network solution Emerson is partnering with Cisco to introduce an industrial wireless networking solution that, it says, will fundamentally transform data management to improve plant productivity, reliability and safety. The Wireless 1410S Gateway, with the Cisco Catalyst IW6300 Heavy Duty Series Access Point, combines the latest in wireless technology with WirelessHART sensor technology to deliver secure data, even in the harsh industrial environments. The wireless access point provides enhanced wi-fi bandwidth for realtime safety monitoring, including Emerson’s Location Awareness and wireless video. These applications enhance personnel safety practices, improve plant security and help ensure environmental compliance.
UK8
November 2019
for water delivery, raw sewage, cooling water, sea water, deionised water, waterglycol mixtures, alcohols, chemicals and many acidic or caustic fluids; or as a heating/cooling energy flow meter for use in conjunction with dual clampon resistance temperature detectors (RTDs) for temperature measurement in hydronic processes and HVAC systems Users can select up to eight parameters to log, including flow rate and total, signal strength, and alarms. A diagnostics tool takes the guesswork out of isolating process or application problems. Users are alerted to out-ofspecification flow conditions and can access a history with the most recent alarm, error and event codes.
Compact analogue transmitters Delta Mobrey has introduced the D22 pressure transmitter and the D32 differential pressure transmitter, the first new products since starting to trade as Delta Mobrey. The compact transmitter is said to provide a cost-effective solution for the measurement of pressure, gases, vapours and liquids in a range of applications. It is suited to use in wellhead control panels where space is at a premium. Both products are ATEX and IECEx certified for use in hazardous areas. The D-Series analogue transmitters offer adjustability. The output signal can be adjusted through an internal zero/span potentiometer, accessible on the electronic board. The transmitters have high levels of standard accuracy, from 0.2%, with even better accuracy available upon request.
Rugged DIN signal isolator The UL Approved ECT-DIN 2-Wire Isolator from Moore Industries is now available in a narrow 15mm aluminium housing. The thinner ECT-DIN 2-Wire Isolator with 15mm width retains the same general and hazardous area approvals as the rest of the ECT family of isolators and has the same RFI/ EMI protection and -40°C to +85°C operating temperature range. The ECT-DIN 2-Wire Isolator can be installed in hazardous locations and does not require installation in climate-controlled environments, making it perfect for more extreme locations. The 15mm ECT DIN 2-Wire isolator and converter with 4-20mA, 1-5V and 0-10V inputs and 4-20mA output, allows more isolators to fit in cabinets and field enclosures where installation space is limited, saving space and money. An
www.controlengeurope.com
optional externally-mounted flange provides a secure mount, which ensures secure installation in high vibration environments. The ECT is UL approved Class I, Division 2, Groups A, B, C & D T4. A variety of the isolators are available to match the type of AC or DC power available at each location. ECT-DIN 2-wire Output-Loop powered models, ECT 2-wire Input-Loop powered models, or 4-wire (line/mains) powered isolators/ converters and splitters are also available.
Control Engineering UK
