Parts Magazine – September 2021 by Parts Magazine

A T V / U T V

S P E C I A L

S E C T I O N

SEPTEMBER 2021

★

VOL. 28, #8

ATV/UTV Market Overview Hot New

$3.95

Products!

★ Motocross Race Report ★ MIC Ride With Us Campaign ★ Paul Langley Named LeMans Corp. Chairman

MOOSERACING.COM | MOOSEUTILITIES.COM

FOLDING WINDSHIELD LOWER DOOR INSERTS SPARE TIRE CARRIER REAR VIEW MIRROR 4 POINT HARNESS WHEEL SPACERS SIDE MIRRORS BUCKET SEATS HEADLIGHTS DOOR BAGS LIGHT BAR NERFBARS ROOF

UTV ACCESSORIES

+INSURGENT TIRE +399X WHEEL

CONTENTS September 2021 H Vol. 28 #8 Publisher/Editor-in-Chief: Don Emde • don@emdebooks.com Editor: Dennis Johnson • dennis@emdebooks.com

Art Director: Morgan Williams Production Manager: Jen Rose • jen@emdebooks.com

ON THE COVER 23 ATV/UTV MARKET OVERVIEW: We take a look at the booming four-wheeler market, which boasted both ATV and UTV sales records in 2020, as well as all the hot new products available from Parts Unlimited.

Copy Editor: Tracy Emde

Webmaster: Jeff Emde

Design Assistant: Kristina Nystul Breaux

Contributing Writers: Kevin Bailey, Joe Colombero, Beth Dolgner, Guido Ebert, Don Emde, Ari Henning, Dennis Johnson, Joe Kress, Jean Turner Contributing Photographers: Don Emde, Mark Kariya, Brian J. Nelson, @Octopi.Media To our readers: Editorial space in this publication has been offered on an “advertorial” basis. While we have done our best to check the facts, our readers should be aware that the responsibility for accuracy rests with the manufacturers, vendors or sponsors who provided the information to us. – Publisher. Parts Magazine is published by Don Emde, Inc., PO Box 6118, Laguna Niguel, CA 92607. Copyright © 2021 by Don Emde, Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage or retrieval system without permission from the publisher. Unsolicited photos or manuscripts cannot be returned unless SASE is provided. Don Emde Inc. cannot take responsibility for lost or misdirected mail. Don Emde Inc. assumes no liability for any material published herein. All statements and information are the responsibility of the authors and/or sponsors. Drag Specialties Magazine, Parts Magazine, Parts Europe Magazine and Parts Magazine Online are trademarks of Don Emde Inc.

Publishing office: PO Box 6118, Laguna Niguel, CA 92607 Tel: 949-632-4668 Don Emde Inc. Directors: President: Don Emde Vice President: Tracy Emde Secretary/General Manager: Jen Rose WE’RE ONLINE! Parts Magazine and Drag Specialties Magazine are available free online in an easily downloadable format. You can also check out the very latest news from the world of motorcycling in our online Newsroom. See it all at: www.partsmagazineonline.com

Printed in the USA NOTICE: Parts Unlimited does not sell direct to the public. To purchase products seen in this magazine, please see your dealer.

DEPARTMENTS

» 6 » 10 » 69

Welcome Letter News & Events Parts Department

SPECIAL FEATURES

» 16 Motorcycle Industry Council: Ride With Us Program » 58 MotoAmerica: Royal Enfield’s Build. Train. Race Series » 23 SPECIAL SECTION: ATV/UTV Market Overview » 26 Maxima » 28 NavAtlas » 30 Trinity Racing » 32 Warn » 34 RK Chain » 36 Bel-Ray » 38 Hot Rods » 39 Design Engineering Inc. » 40 S&S Cycle » 41 Moose Utility Division » 42 LIQUI MOLY » 43 MB Quart » 44 Nelson-Rigg » 45 Pro-X » 46 DP Brakes » 47 XDR » 48 Wössner » 49 Regina Chain PRODUCT SHOWCASE

» 20 Parts Unlimited E-bike Wheel Care » 22 Flat Tire Defender » 50 Dunlop » 54 THOR » 56 Mustang Seats » 60 Icon » 64 Moose Racing » 66 Alpinestars » 67 JE Pistons » 68 RZ Mask

PREDATOR

SEATS FOR HONDA®

Predator seats from Z1R feature a low profile design which helps lower the rider and improve the seating position. Covered in high-quality automotive-grade vinyl, the molded flexible urethane foam provides maximum comfort while, the 3⁄16” ABS thermoformed seat base creates the perfect fit. Available in Smooth and Flame stitch.

ADDITIONAL COVERINGS, THREAD COLORS AND STITCH PATTERNS ARE AVAILABLE THROUGH OUR CUSTOM SEAT PROGRAM. VISIT Z1RSEATS.COM TO CREATE AN EXTENSION OF YOUR PERSONAL STYLE.

Z1R.COM

CONTACT YOUR PARTS UNLIMITED REP TO SEE THE ENTIRE LINE OF Z1R SEATS. MADE IN THE U.S.A.

E M D E

R E P O R T

The Cure For Cabin Fever by D on Em de

page 23, we feature some additional stats on the market, followed by a special section of ads and editorials of some of the leading manufacturers found in the 2021 Parts Unlimited catalog. There are some interesting things also happening on the two-wheel side of the market. Starting on page 16 in this issue we have a feature story on a new industrybuilding program by the Motorcycle Industry Council called “Ride With Us.” Also, be sure to check out the new Build. Train. Race series being added to the MotoAmerica event schedule. Working closely with the Royal Enfield company, the series will be the first all-women initiative teaching a selected group of ladies how to build and, for their first time, race their own motorcycles. Speaking of racing, our THOR motocross riders are having a great season. Star Yamaha 450 rider Dylan Ferrandis has four wins in the seven races to date, with a 47 point lead. His teammate Aaron Plessinger has provided Dylan good backup with some strong podium finishes. In the 250cc class, Justin Cooper leads the way with teammate Jeremy Martin scoring some wins as well. We are hoping for more success by them all as the series heads into the second half of the season.

y the summer of 2020, many Americans were feeling the need to get out of the house, but they didn’t want to ignore the threat of catching the Coronavirus by being in public places. Four-wheel off-roading has been popular for many years anyway, but once the flood gates opened with the public heading for the open spaces, the powersports industry saw ATV and UTV sales increase by leaps and bounds. In 2020, more than 275,000 ATVs were sold, as well as 600,000-plus UTVs. As we all know, people love to personalize their vehicles and the purchase of a new one is in most cases the beginning of a project to outfit them with their favorite accessories. In this issue, we spotlight that four-wheel sport ATV/UTV segment of the market. Starting on

Lastly, just as this issue was heading to the printer we got the news that company founder Fred Fox has named Paul Langley as the new Chairman of the Board of Directors of LeMans Corporation. Fred, now 85 years old, is adding emeritus to his title and will be slowing his pace down just a bit. I have known Paul Langley for a long time, having him as an advertiser in our magazines for many years when he was with Dynojet, Vance and Hines, and in recent years, S&S Cycle. We look forward to working with him and wish the very best for him in his new role at the helm of LeMans Corporation. ■

Ride Safe!

Publisher / Editor-in-Chief

PARTS MAGAZINE

★

SEPTEMBER 2021

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

INTRODUCING THE SADDLEMEN

FZ-09/MT-09 P E R F O R M A N C E S P O R T S E AT

Sport

Track-CF

#0810-1622

#0810-1621

Track-LS #0810-1691

Gripper GP-V2 #0810-2065

PERFORMANCE & COMFORT.

When it comes to precise feedback and ultimate control while riding, Saddlemen’s line up of performance sport seats featuring multiple cover options and center comfort channel is a game changer. Your motorcycle’s seat is the single largest control surface and when it provides impact dampening and isolates vibration it will signiﬁcantly improve the feel of your bike while reducing rider fatigue. Featuring our exclusive Gel-Core Technology that will extend your ride time by up to 400%. *Instantly upgrade starting sta at under $500 // Made in the U.S.A.

IT’S NOT OUR OPINION, IT’S SCIENCE

Saddlemen’s Exclusive Gel-Core Technology

Tradtional Foam Construction Air Bladder Construction

SADDLEMEN SEAT TECHNOLOGY - FZ-09/MT-09

UVPROTECTION ADVANCED SOLAR TECHNOLOGY

COMFORTFOAM C O - M O L D E D T E C H N O LO GY

SADDLEGEL PROPRIETARY POLYMERS

PROFOAM

PROGESSIVE DENSITY

TRIGRIPPER WET / DRY TRACTION

PREMIUM I TA L I A N L E AT H E R

*Made in the USA. Available now for your 2014-2020 Yamaha FZ-09 / MT-09

Tech #0810-1623

TRACK-LS

AND

NEWS EVENTS Lemans Corporation Appoints Paul Langley as New Chairman FRED FOX TAKES ON ROLE OF CHAIRMAN EMERITUS

n 1967, Fred Fox founded LeMans Corporation in the basement of his house and has worked tirelessly to build LeMans into a leading global powersports distribution company with 1,100-plus employees and eight warehouses. On reaching 85 years of age, Fred has decided to slow down a little in the new role of Chairman Emeritus. Paul Langley has been named Chairman of LeMans having successfully served in leadership roles with S&S Cycle, Vance & Hines and Dynojet. “I have enjoyed a strong partnership with LeMans for the past twenty plus years and know that LeMans is one of the most successful and well managed companies in our industry. I am honored to serve as Chairman, which is a privilege I must earn each day forward,” Langley said. “There will be a steep learning curve, new problems to solve and I look forward to working with familiar and new faces in our electrifying industry. Having Fred close by affords me the benefit of tapping into his wisdom on a regular basis.” LeMans is the parent company of Parts Unlimited, Drag Specialties, Parts Canada and Parts Europe. ■

Paul Langley

PARTS UNLIMITED WELCOMES NEW NORTHWEST REGION SALES REP

arts Unlimited announced that Abe Mingo will serve as the newest sales rep for the Northwest region covering southern Idaho.

Mingo’s industry experience includes sales management on the dealer level as well as racing and riding motocross and off-road on his Husqvarna FC350 and TC 250. Abe is also deeply involved with his local motocross series and with motocross, trail and snowmobile clubs. In his spare time, Mingo is a Pee-Wee motocross dad, and has aspirations of working on project bikes, cars and trucks. Parts Magazine welcomes Abe Mingo to his new role.

■

Abe Mingo

PARTS MAGAZINE

★

SEPTEMBER 2021

LIQUI MOLY USA, INC. 1801 E Edinger #255A Santa Ana CA 92705 E-Mail: info@liquimoly.us

Call us toll free: (888) MOLYOIL (888-665-9645)

www.liqui-moly.com

AND

NEWS EVENTS Pro Motocross Race Roundup BLUE SUMMER: THOR/YAMAHA RIDERS LEADING THE WAY

THOR/Star Racing Yamaha teammates Jeremy Martin (6) and Justin Cooper (32) lead the way into the first turn at Spring Creek, where Martin would be a double winner and Cooper would leave with the red plate. @Octopi.Media

merican motocross fans have never been more thrilled to be back at the races. The 2021 Lucas Oil AMA Pro Motocross Championship is at a fever pitch with the series starting to produce its standout athletes. After seven of 12 rounds, those breakout stars are members of the Parts Unlimited/THOR-backed Monster Energy Star Yamaha Racing Team in both the 450 and 250 divisions. Coming off a stellar year in the Monster Energy AMA Supercross Championship, the Star Yamaha Team made its presence known with race wins and championships in both 250SX East and West regions. As the team’s first season in the 450cc division, now stewarding the full Factory Yamaha effort, it was considered a learning year. But it is the rest of the paddock who are now learning that the THOR/Star Yamaha Team has figured out how to win races in the premiere ranks. Dylan Ferrandis is putting his stamp on the 450MX championship in his rookie season, having amassed four wins after seven rounds, and managing consistency on every other weekend, enough to break away in the championship chase. Ferrandis scored his maiden 450 Pro Motocross win at the opening round at Fox Raceway in California, which came as a surprise, even to him. “I didn’t wake up this morning thinking that I would win the overall,” Ferrandis said. “It’s an

PARTS MAGAZINE

★

SEPTEMBER 2021

amazing result as a rookie in the 450 class to win the first moto and the overall. I’m also really happy to get that first 450 win for the Monster Energy Star Yamaha Racing team. This one is really for them. The hard work has definitely paid off. I want to say a big thanks to all of the people around me.” For the Frenchman, his overall win at RedBud also stands out as a memorable moment in the 2021 championship. “The track was one of the best of the season,” Ferrandis said. “I gave it everything I had in both motos, and getting back-to-back overall wins is a dream come true. With the fans cheering on the side of the track and the track being so fun to ride, I cherish this moment and want to give a big shoutout to the team and all of the people who help me.” Ferrandis gained control of the championship at High Point, and has headed the points ever since, leading by 47 points after round seven, as the series heads into the two-week break as of press time. Monster Energy Star Racing Yamaha’s Aaron Plessinger has also featured some breakthrough performances, including his first 450MX podium at the season opener. With two THOR/Star Yamaha riders on the podium, it was clear that the team is a force in the 2021 season.

In the 250MX division, the Monster Energy Star Racing dominance continues, with Justin Cooper leading the field and Jeremy Martin coming on strong in recent rounds. Coming off his 250SX West Supercross championship, Cooper carried his momentum straight into the outdoors. While the competition remains fierce and it seems new winners emerge each week, Cooper has shown the consistency to lead the championship. It took seven rounds before the AMA Pro Motocross 250MX Championship produced a repeat winner, and that winner is THOR athlete Jeremy Martin. It’s been an up down season for Martin, who came into the series nursing a wrist injury, which he then aggravated in a crash at round two. After sitting out the following round, Martin made a steady recovery, and then put a dominant stamp on his home race at Spring Creek with a decisive 1-1 victory. Spring Creek was a pivotal point for the THOR/Star Racing Yamaha 250 effort, as it also saw the points lead and red plate handed to Justin Cooper. ■

Monitor

what is happening with

your engine.

DL-03A

Air/Fuel ratio & RPM data logger

NORTH AMERICA

www.kosonorthamerica.com

“I didn’t wake up this morning thinking that I would win the overall,” said Ferrandis after nabbing his career-first 450 win at the Fox Raceway season opener. The THOR athlete is now running away with the premiere championship in his, and the Star Racing Yamaha’s, rookie season in the 450cc division. @Octopi.Media

AND

NEWS EVENTS Honoring a Champion THE KURT CASELLI FOUNDATION FUNDRAISER PMS:021C CMYK: 0/75/100/0

Photo by Mark Kariya

funds will be applied directly to each recipient’s school. We have now awarded 36 riders with the scholarship to aid in their educational journey.

PMS: PROCESS BLACK CMYK: 40/30/30/100

We also announced that we were able to donate a Can-Am Defender to MotoMedX, a rescue organization in Northern Nevada that provides for the safety of racers. It is a group of volunteer riders, many with extensive EMS backgrounds, that sweeps race courses and provides immediate on-site care in the event of a crash or injury. We also presented a new sweep rider vest in partnership with WLF Enduro; it’s a fully prepped kit for sweep riders with medical backgrounds to aid down or injured riders.

urt Caselli was one of the greatest off-road riders America ever produced. The three-time AMA Hare & Hound National Champion and three-time WORCS Champion also won several stages of the Dakar Rally as well as multiple ISDE Gold Medals. He died in 2013 in a racing accident while leading the Baja 1000 in Mexico. In addition to being a celebrated racer, Kurt was also a great human being who helped and mentored fellow riders. After his passing, friends and family formed the Kurt Caselli Foundation to honor his legacy, and focus on a three-part mission that encompasses safety precautions for riders before, during, and after a racing career. At the Foundation’s annual fundraiser in June at the Doffo Winery in Temecula, California we spoke with its Director of Operations, Lindsey Lovell, about this amazing organization. (Q&A edited for clarity and space.)

Parts Magazine: Tell us about this year’s event? Lindsey Lovell: This was our 7th Annual Caselli MotoDoffo Winery event. Each year, we partner up with the Doffo family to host this event and raise funds to further our mission and continue to fund important safety initiatives. Prior to the event, Doffo makes a Caselli wine blend, decorated with a MotoDoffo label by a talented artist. This year’s label was done by Chris White of Buzz Vizuals. There was also a raffle and live auction. We announced that six recipients would be receiving the Kurt Caselli Scholarship for the fall 2021 semester, the $2,500

PARTS MAGAZINE

★

SEPTEMBER 2021

The first 100 attendees received a swag bag from sponsors and supporters, including event sponsors: 805 Beer, Doffo Winery, FMF Racing, GasGas, K&N Filters, KTM USA, MotoDoffo Collection, Rocky Mountain ATV/ MC, State of Ethos, and Torco USA.

What other events does the Foundation hold? We host two annual events – the Doffo Winery fundraiser and our annual Kurt Caselli Ride Day. The 2021 Ride Day event will be held on Saturday, December 4th at Fox Raceway in Pala, California. The KCF will be giving away a 2021 KTM 350 XC-F at the ride. Between the two events, we raise money to continue to fund our annual budget.

What has the Foundation accomplished so far? Since 2014, the Kurt Caselli Foundation has raised more than $1,600,000 to protect and support the lives of off-road riders, and has spent over $700,000 so far on Safety Initiatives. Highlights include supporting various off-road and motocross series with safety supplies such as course markings, high-visibility race bibs for youth riders, yellow caution flags, emergency vehicles for medical race personnel, emergency contact helmet stickers, first-aid kits, pre-race course safety advisor, communications for medic and race personnel, and medical indicator flags and race flags. We also established Riders 1st Responders to help train riders in CPR and First Aid, as riders are often the first responders in most emergency situations on the trail or race course. The Foundation donated the Ultrasound machine that travels the Supercross and Pro Motocross circuit aboard the Alpinestars Mobile Medical unit.

» To learn more about the Kurt Caselli foundation and its good works for off-road riders go to www.kurtcaselli.com.

S P E C I A L

F E AT U R E

MIC LAUNCHES RIDE WITH US P ROGRAM AI M S TO I NC R E A S E R I D E R S H I P, E X PA ND I ND U S T RY

Engage and Integrate – as well as bringing on new talent and supporting new-rider education initiatives. Ride With Us is purposefully being launched within the first postCoronavirus riding season and we will be rolling out various tools and campaign elements to help grow the industry.

Parts Magazine had a chance to talk with Erik Pritchard, the MIC’s President and CEO about the Ride With Us program and its aim to create more riders and to get current and returning enthusiasts riding more. Given that this is an industry-wide effort of multiple, ongoing initiatives, there will be opportunities for Parts Unlimited dealers and aftermarket vendors to get involved. (This Q&A has been edited for clarity and space.)

We have to remember that we’re competing with other outdoor activities; outdoor recreation all had growth. And as the country opens up, we are also competing with all the other ways people spend time – concerts, games, travel, etc. One of the questions we asked is, ‘How do we keep up this growth?’ One answer is to make it as easy as possible for prospective new riders to experience motorcycling in an easy, comfortable way.

he Motorcycle Industry Council has launched Ride With Us, the powersports industry’s multifaceted market expansion program. The program is an effort by the MIC and its member companies to support new and returning riders at every stage of their journey, with the goal of increasing ridership and growing the industry.

Parts Magazine: How did the Ride With Us program come about? Erik Pritchard: While we were navigating the Coronavirus, we also were working hard to prepare for the post-pandemic environment. As you know, the powersports industry has done well during the pandemic. Motorcycling in particular is an ideal way to enjoy recreational riding, transportation, exploring and still practice social distancing. Many new riders got their start, and many past riders returned. Demand went through the roof with Covid-19. We wanted to develop programs to keep those numbers on the upswing. How do we continue to generate demand? Our preparation included a number of initiatives tied to each phase of the new rider journey – Inspire, Explore,

PARTS MAGAZINE

★

SEPTEMBER 2021

How can dealers and the aftermarket get involved? Basically, Ride With Us is a market expansion strategy to introduce everyone to the incomparable thrill of riding a motorcycle. We hope to make motorcycling more welcoming to newcomers, make it easier for them to have a first ride experience, then learn and grow as a motorcyclist, become part of the community and eventually a life-long rider. This will benefit the whole industry. Ride With Us is not a single program, but an ongoing series of initiatives. In the coming months, we will be launching a number of initiatives directly aimed at helping to support dealers. We’ve heavily invested in research, and dealers and the aftermarket are essential to this effort. With the support of the whole industry moving in the same direction, we can increase the number of riders.

Can you give us an example of a program designed to attract new riders? As a part of the Ride With Us program, the MIC partnered with the Motorcycle Safety Foundation to deliver a new 45-minute first-ride experience for people who have never ridden a motorcycle before. The first-ride experience makes it easier for prospective riders to get their first taste of motorcycling in a fun, low-risk experience through its Ride With Us Moto Intro experience. This will be featured as a part of the Progressive International Motorcycle Show Outdoors Tour across the country. There’s nothing quite like the excitement, joy and feeling of empowerment that motorcycling can bring, but people aren’t always sure of how or where to start. The Ride With Us Moto Intro gives non-riders a chance to experience the thrill of their first ride within 45 minutes. We are delighted to work with IMS, and its great network of events, to bring this experience to even more people. In our test event, many people signed up for a Basic Rider Course as soon as they got off of the bike. We just need to help them get started, and then help guide them in their journey. Where can prospective new riders try the Moto Intro Ride With Us program? The Moto Intro is designed for people who have never ridden a motorcycle or scooter before. MSF RiderCoaches will guide new riders through basic motorcycle controls and help them experience their first ride in a closed-course environment.

This activation kicked off with the Progressive IMS Outdoor Tour in July in Sonoma, California, and will be a part of ongoing IMS events across the country this summer and fall. The schedule includes: • August 20-22

Chicago, Illinois (tentative)

• September 3-5

Brooklyn, New York

• September 10-12

Carlisle, Pennsylvania

• October 1-3

Fort Worth, Texas

• October 8-10

Nashville, Tennessee

• October 15-17

Lakeland, Florida

• October 29-31

Atlanta, Georgia (tentative)

• November 19-21

Southern California (venue TBD)

The “first ride” exercise allows us to develop a relationship with these new riders, and is just the beginning of the journey into the motorcycling community. The program gives new riders their first taste of two-wheels on a speed-limited electric motorcycle. We provide all the gear, the bikes and the coaches. The rider journey continues online at www.ridewithus.com with information and resources on next steps, with specifics on rider education and training including the MSF Basic Rider Course.

» The Ride With Us Moto Intro experience will be free to attendees along

the IMS circuit. Stay tuned for details on the tools and support for dealers the MIC is launching and to learn more go to www.ridewithus.com.

��

SEPTEMBER 2021

★

PARTS MAGAZINE

E-BIKE PRODUCTS

P R O D U C T

S H O W C A S E

Prevention, Repair and Protection Complete E-Bike Wheel Care

arts Unlimited carries a variety of products to help your E-bike customers avoid flats and rim damage, plus plug punctures and air up when a flat does happen. From tubeless sealant and Flat Tire Defender inserts to plug kits, inflators, and CO2 cartridges, Parts has everything your customers need to keep their E-bikes rolling.

DITCH THE TUBES Going tubeless saves rotating weight, allows your customers to run lower tire pressures for more traction and a smoother ride, and eliminates the common pinch flat. And when it comes to E-bikes like the INTENSE TazerMX, going tubeless means your customers can avoid the hassle of flipping their heavy E-bike upside-down for a trailside tube replacement, having to carry an axle-removal tool, and needing to pack spare 27.5-inch and 29-inch tubes. The TazerMX is ready to go tubeless thanks to pre-taped rims and tubeless-ready Maxxis tires. All you need to do is remove the inner tube, install the tubeless valve stems that come with the bike, and add the appropriate amount

Muc-Off’s No Puncture Hassle Sealant

PARTS MAGAZINE

★

SEPTEMBER 2021

of tire sealant. Sealant is needed to prevent air loss at the tire bead, and also serves to plug punctures. Parts Unlimited carries premium sealants from both Maxima and Muc-Off, two well-known and trusted moto brands with a knack for developing effective formulas. Maxima’s Tubeless Sealant combines fast-acting polymers with suspended rubber particles to quickly seal punctures, providing a patch that’s nearly as durable as the tire itself. Offered in a 16-ounce bottle, Tubeless Sealant offers longlasting performance, remaining functional within the tire for up to six months. Since sealant does have a service life, Maxima’s Tubeless Sealant comes with handy rim stickers so your customers can note the installation date. Muc-Off’s No Puncture Hassle sealant uses a liquid latex mixed with proprietary clotting agents to seal big punctures. The formula even contains a UV-sensitive dye that will highlight the puncture location so your customers can keep tabs on their tires’ condition. No Puncture Hassle sealant is offered in a convenient 140 milliliter pouch designed to pour into Presta valves, as well as a shop-size 1000 milliliter bottle.

Maxima Tubeless Sealant

Topeak Tubi Master X Kit

Even with sealant splashing around inside their tires, your customers may still suffer a puncture that the sealant can’t handle. That’s why having a tubeless plug kit on hand is critical. Parts Unlimited carries the Cigar Tool from Crankbrothers as well as the new Tubi Master X kit from Topeak. Both kits include tubeless plugs, a reamer, installation tool and CO2 cartridge adapters, and are small enough to strap to the seat-post, or carry in a seat bag. Bundle the Cigar Tool or Tubi Master X with a few 25-gram CO2 cartridges (available in bulk packs for convenient stocking) and your customers with have everything they need to fix a flat and get aired up. The Tubi Master X even features an advanced 2-in-1 CO2 injector head that works to install the plug and inflate the tire in one step, helping riders get back to their ride as quickly as possible. When it comes to setting tire pressure, a few PSI make a big difference. That’s why it’s important to have an accurate tire gauge on hand. Topeak’s Smartgauge D2 features a rotating head that works seamlessly with Presta and Schrader valves, and reads up to 250 PSI, displaying the pressure on an easy-to-read LCD screen. An air-release button makes dialing in the pressure easy.

TIRE AND RIM PROTECTION Your off-road motorcycle clientele are no doubt familiar with mousse inserts. Well, a similar product is available

for E-bikes in the form of the Flat Tire Defender II. This bicycle-specific closed-cell insert was designed to keep professional competitors from suffering race-ending flats and rim damage, but it works for casual riders too. The FTD II is for use on tubeless applications and allows lower pressures to be run for a bigger tire-contact patch and superior traction. The insert supports tire sidewalls for improved cornering and stability, secures the tire bead to minimize burping, and most importantly acts as a bump stop to prevent big hits from pinching and tearing the tire or damaging the rim. Given the weight of modern E-bikes and the speed they’re able to carry, installing Flat Tire Defenders is a smart move. If your customers aren’t quite ready to ditch their tubes, they can still protect their rims and help avoid flats by running the FTD Tube Defender. Designed for tires being run with tubes, the FTD Tube Defender provides a protective layer between the bicycle tire and the tube to help prevent tube punctures, pinch flats and rim damage. Another advantage to this product is that it doesn’t require tire sealant.

PARTS UNLIMITED

PLUG THE PUNCTURE AND AIR UP

Both the FTD II and FTD Tube Defender are easy to install and available in a variety of sizes to fit modern mountain bikes, including 27.5/29-inch combos for the INTENSE TazerMX. Please note that running the FTD Tube Defender may require a narrower inner tube to compensate for reduced tire volume.

» Talk with your Parts rep for details on all of these products, and learn more in the 2021 Bicycle Volume 2 catalog.

Crankbrothers Cigar Tool

��

Flat Tire Defender II Tire Inserts

SEPTEMBER 2021

★

PARTS MAGAZINE

E-BIKE PRODUCTS

P R O D U C T

S H O W C A S E

On the Defense

Flat Tire Prevention for Mountain Bikes

he exhilaration and freedom of being on two wheels is not limited just to machines with an engine and a throttle. Cycling and motorcycling share a rich history, and countless enthusiasts continue to have that cross-over passion today.

it may seem like a simple, yet brilliant, idea at face value, the FTD II is the result of extensive designing and testing with different materials, sizes and real application use. The FTD II foam inserts provide flat and

These inserts are designed to add an extra level of flat tire protection for tubeless tire setups. The Stacys worked directly with top downhill riders in development, who immediately felt the benefit for riding and racing.

Carol and Frank Stacy have followed their rim protection, as well as improved two-wheeled passion throughout 35 years traction for mountain bikes. The lightin the motorcycle and bicycle industries. weight design minimizes unsprung Starting from family motorcycle shops weight and rolling resistance. and childhood riding, they’ve gained The FTD II provides flat and rim irreplaceable experience through everyprotection, plus improved traction for both 27.5-inch thing from professional racing and direct AMA involvement and 29-inch rim sizes. For more casual riders who prefer to years of motorcycle product testing and development. traditional tubes, Flat Tire Defender also offers the Tube This long industry dedication combined with their passion Defender, a foam wrap covering the tube, protecting it for innovation led to the establishment of Flat Tire Defender. from punctures and minimizing pinch flats. ■ The FTD II is Flat Tire Defender’s most recent iteration For more details and specifications on Flat Tire of the company’s innovative, foam mountain bike tire Defender products, contact your Parts rep, and check insert – perfect for the INTENSE Tazer MX E-bikes. While out the 2021 Bicycle Volume 2 catalog.

TUBE DEFENDER Designed for "Inner Tubes"

Easy to Install Increases Traction Protects Inner Tubes from Cuts and Punctures Protection Barrier Between Tire and Inner Tube

FTD II Designed for "Tubeless"

Better Rim Protection Better Tire Suspension Better Tread and Sidewall Protection Better Traction

FLATTIREDEFENDER.COM

@FLATTIREDEFEND

S P E C I A L

F E AT U R E

ATV/UTV MARKET OVERVIEW

ATV/UTV MARKET OVERVIEW Both segments hit sales records in 2020

t’s no secret that the four-wheeler segment of the powersports market is alive and booming, an achievement reflected by the proliferation of aftermarket products available through Parts Unlimited. In 2020 alone, both the domestic UTV and ATV vehicle segments hit new sales records, with ATV sales ratcheting up more than 30 percent over 2019, according to research performed by Minnesotabased Power Products Marketing (PPM). Let’s take a look at a breakdown of these recordsetting numbers.

ATV Market Spotlight

According to the PPM, ATV sales in the U.S. in 2020 totaled 275,870 units, up +32 percent, compared to 208,580 units in 2019. This represents the most sales since the market moved more than 320,000 units in 2009. Looking back at the ATV market over the past 20 years, the U.S. saw sales of approximately 651,675 units in 2000, then witnessed a rise of nearly +25 percent over the next four years to an all-time high of almost 812,800 units in 2004. The market then declined between 2005 and 2008 - likely due to increased consumer interest in UTVs – and experienced the Great Recession in 2009.

��

SEPTEMBER 2021

★

PARTS MAGAZINE

F E AT U R E

ATV/UTV MARKET OVERVIEW

S P E C I A L

In 2020, sales trends suggested Utility models represented 77 percent of the market, followed by Youth models responsible for 16 percent of the market, and Sport models representing 7 percent of the market share. UTV Market Spotlight

Relatedly, UTV sales in the U.S. in 2020 for the first time eclipsed 600,000 units, growing an incredible +48 percent in the past five years, reports PPM. Initially a vehicle delegated to commercial uses – industrial, construction, turf maintenance, etc. – UTVs found favor with consumer users as soon as they realized manufacturers were bringing vehicles to market that could offer off-road adventure in relative comfort. From a historical perspective, the UTV market grew at a moderate average annual pace of about +5.5 percent between 1990 and 1996 as the availability of commercial applications bloomed and experienced consistent growth. Between 1996 and 2000, UTV sales more than doubled as the U.S. economy continued to expand, fueled by record consumer spending. At this point, much of the growth remained in the commercial side of the market, although even the consumer side began finding traction. Then, spurred by the introduction of consumer-oriented

PARTS MAGAZINE

★

SEPTEMBER 2021

ATV/UTV MARKET OVERVIEW

machines like the Yamaha Rhino and later Polaris RZR, North American UTV sales began an astonishing six-year surge at an average annual growth of +20 percent until reaching a high of 270,700 units in 2008. In 2009, as the U.S. economy endured the worst recession since the Great Depression of the 1930s, UTV sales took a big hit. Sales quickly bounced back in 2010, however, and grew in each of the following 10 years, with purchases apparently spurred by financially secure consumer recreationists, the rapid development of an ever-larger selection of vehicle types, and what appears to be a growing consumer preference for choosing to spend dollars on home-grown pursuits that have also proven to benefit boat and recreational vehicle sales. Parts & Accessories

There’s one thing for certain, UTV owners love to modify their rides. Parts Unlimited offers a huge selection of aftermarket parts, gear and accessories that answer any upgrade need, whether it’s performance, appearance, function or creature comforts and all mods in between. ■

» Talk with your Parts rep, and check out the 2021 ATV & UTV, Helmet & Apparel and Tire & Service catalogs to scope out everything that’s available.

��

SEPTEMBER 2021

★

PARTS MAGAZINE

CHEMICALS & LUBRICANTS

P R O D U C T

S H O W C A S E

Slick Service

Premium Lubes for Side-by-Sides Maxima’s SXS Premium engine oil is an economic option for keeping your customers’ engines spinning smoothly. SXS Premium is a mineral-based oil that provides excellent film thickness and viscosity stability across all operating temperatures for optimal performance and reduced wear.

Maxima offers both a SXS Premium engine oil and a SXS Synthetic engine oil, each one developed for optimum performance in the hard-working engines of modern side-by-sides.

Maxima’s SXS Syn Gear oil, a fullsynthetic, ester-based gear oil, is formulated to withstand everything from high-load hill climbs to highspeed desert riding

Maxima’s lubricants offer outstanding component protection and performance, and the company has a variety of SXS-specific products. That includes mineral and synthetic engine oils, gear oil, and transmission fluid, as well as Maxima’s popular SXS Quick Change Kits, which are available for the Can-Am Maverick X3 Turbo and non-turbo models, as well as most Polaris RZR and Ranger models.

PARTS MAGAZINE

★

To make oil changes even easier, Maxima has developed the SXS Quick Change Kit. These “Oil Change in a Box” kits combine SXS Synthetic oil in 5W-40, 5W-50 or 10W50 with a premium ProFilter spin-on or ProFilter cartridge filter (depending on model) and a replacement drain-plug crush washer. These convenient kits are offered for Polaris RZRs and Rangers as well as Can-Am Maverick models.

Maxima’s SXS Trans fluid keeps an automatic transmission properly lubricated and cooled.

he riding season is in full swing, which means your customers are stacking hours on their sideby-sides. Help them keep the fun at full throttle this summer by encouraging them to stay on top of their vehicles’ maintenance. That means on-time oil changes as well as fresh gear oil and transmission fluid, all of which is available from Maxima Racing Oils.

For the ultimate in protection, SXS Synthetic engine oil is the way to go. Mixed entirely from lab-made molecules for the purest and most refined lube possible, SXS Synthetic combines a shear-stable polymer package with a healthy dose of surface-active esters. These synthetic esters help the oil stick to surfaces for better lubrication at high engine speeds, while the polymer system maintains oil-film and viscosity, even in the hottest summer temps.

SEPTEMBER 2021

Maxima’s SXS Trans fluid is also ideal for Can-Am and Polaris models with CVT transmissions. Channeling 100-plus horsepower through an automatic transmission requires lots of moving parts to be properly lubricated and cooled, and that’s exactly what SXS Trans is designed to do. As with Maxima’s engine oils, SXS Trans fluid is formulated to maintain that critical film thickness across all operating temperatures to minimize gear, bearing, and chain wear.

The final link between your customer’s throttle foot and the tires are the hypoid gears found in the SXS’s differentials. Keeping those ring gears and pinions gears – as well as their supporting bearings – bathed in the right lube is crucial. That’s where Maxima’s SXS Syn Gear oil comes in. This full-synthetic, ester-based gear oil is formulated to withstand everything from high-load hill climbs to high-speed desert riding. With extreme pressure and anti-wear additives mixed into a synthetic base oil, SXS Syn Gear optimizes power transfer while ensuring ultimate hardware protection. ■

» Talk to your Parts rep for more details and check out the product lineup in the Tire & Service catalog.

MAXIMA OIL CHANGE KITS INCLUDE EVERYTHING YOU NEED TO COMPLETE AN OIL CHANGE IN YOUR CAN-AM OR POLARIS SXS. MANUFACTURER

MODELS

ENGINE OIL/PART #

INCLUDES

SXS FULL SYN 5W-50 #3601-0728 SXS FULL SYN 10W-50 #3601-0729

PROFILTER OIL FILTER PF-198 CRUSH WASHER

POLARIS

2018 RZR TURBO S 2016-2018 RZR XP TURBO 2014 + RZR XP 1000 MODELS 2018 RZR RS1 MODELS 2013-2020 RZR 900 MODELS 2017 + RANGER 1000 MODELS 2013-2019 RANGER 900 MODELS

POLARIS

2019 + RZR XP TURBO MODELS 2019 + RZR XP TURBO S MODELS 2020 + RZR PRO XP MODELS

SXS FULL SYN 5W-50 #3601-0822 SXS FULL SYN 10W-50 #3601-0823

PROFILTER OIL FILTER PF-199 CRUSH WASHER

2016 + MAVERICK X3 TURBO & NON-TURBO MODELS

SXS FULL SYN 5W-40 #3601-0784 SXS FULL SYN 10W-50 #3601-0783

PROFILTER OIL FILTER PF-152 CRUSH WASHERS O-RING

CAN-AM

Made in the USA

MaximaUSA.com

AUDIO & COMMUNICATIONS

P R O D U C T

S H O W C A S E

Crank-Up the Enjoyment

Audio and Communication Packages for UTVs passengers to communicate with the driver right next to them, let alone people in other cars.

This two-person over-the-head intercom and radio system is just one of NavAtlas’ communication packages. The kits include everything needed for great in-car and car-to-car communications.

NavAtlas aims to equip drivers with reliable and clear communication, and takes the guess work out of ordering by offering all the necessary components in several allin-one packages. With a dual-band UHF/VHF, 250-channel ready radio, dual-band antennas, three headset style options plus all the necessary cables and connections, UTV enthusiasts across a variety of different settings can benefit from in-car communication. For when it’s time to upgrade the audio experience, NavAtlas’ audio package options are designed to cover Polaris RZR and CanAm X3 models with various zones and components. These include a simple, amplified NRZ7PK Kick Pod or NRZ10BPK subwoofer, to amplified NX365PK upper Dash Pod systems for the CanAm X3.

port UTV machines have progressed by leaps and bounds in a short time. Everything from turbocharged engines to electronically controlled suspension has pushed the driving experience to new levels, but there are still several functional and enjoyment factors customers can’t always get from the factory. When the crew at NavAtlas isn’t developing their latest in powersports audio and communication, they like to spend their time hitting the trails in the driver’s seat, giving them a first-hand look to what can elevate UTV customers’ experience. NavAtlas offers an array of individual audio and communication components, but when your customers are faced with a long list of different options and specifications, those upgrades can be overwhelming, and lead to unwanted mistakes and frustration.

Zone 1 offers RZR customers an updated, digital source unit with all the popular source inputs, and even a rear camera input. Zones 2 through 6 bring clean and powerful sound to both CanAm and RZR models by adding kick panel or cage-mounted speakers to complement the upgraded source unit. As zone numbers increase, NavAtlas leaves customers the option to get as loud as they can handle with various combinations of subwoofers, speakers, sound bars, powerful amplifiers, and all the necessary wiring and mounting hardware. ■

» Talk with your Parts rep for details, and learn more in the ATV & UTV catalog.

NavAtlas also offers several comprehensive audio upgrade packages. Each of the zones feature a collection of components and all the necessary wiring and mounting hardware.

Thankfully, NavAtlas has simplified the process for customers wanting to upgrade audio and communications. The company has taken its components and grouped them into different audio and communication packages, including options for just about every customer, from simple, quality upgrades to complete, powerful systems. Protective features are a high priority in the UTV world. Upgraded restraints, doors and roll cages are common modifications, but another key factor can be delivered with in-car and car-to-car communication. Wind, engine noise, dust and helmets can make it nearly impossible for

PARTS MAGAZINE

★

SEPTEMBER 2021

Audio and Communications

The Best of Both Worlds

RZR1ZONE2

PU# 4405-0719

E3 8 N 080

ZO05-

X U#

-0

PU# 4405-0725

RZR1ZONE4

-0

| P

-0

P R O D U C T

S H O W C A S E

CLUTCH KITS

Going Big

Clutch Kits Designed for Larger Tire Sizes

Trinity Racing created a clutch kit that takes care of the issues UTV customers run into when adding larger tires. Each kit is designed for a specific vehicle, tire size and elevation.

ure, ripping across a dune, tearing down a trail or blasting across the great wide open in a UTV is a great time, but building that beast before it ever leaves the pavement is fun too. When your customers buy a new UTV, most want to personalize their rides with the myriad aftermarket parts and accessories that are available. Whether it’s an aftermarket exhaust system, fuel management setup, wheels and tires, or a sound system, there are many options to choose from. One of the most popular modifications for UTV’s is an aftermarket set of wheels and tires. And, when doing so, often the tire size is increased. Larger tires look great and help the vehicle roll over rocks more easily, but they also change how the clutch engages, effectively changing the gearing to being much taller. This in turn hinders the lowend performance of the vehicle and puts more stress on the drive belt. The team over at Trinity Racing has been modifying UTVs for years, and it knows a thing or two about increasing vehicle performance. When it comes to that tire/wheel modification, the company created a clutch kit that takes care of those issues caused by sizing up on the tires.

PARTS MAGAZINE

★

SEPTEMBER 2021

Trinity Racing designed the clutch kit to consider the overall diameter of the tire that is being installed, and made it simple to choose which kit is best for your customers’ applications. Each of the clutch kits is designed for a specific vehicle, tire size and elevation. For example, a 2020 Polaris RZR Turbo that is in a lower elevation climate and has new tires with an overall diameter of 32-inches would take a specific clutch kit that is designed to fit 2017-2020 Polaris RZR Turbo models with 30-inch to 32-inch tires, and is driven primarily between zero and 3,000 feet of elevation. This kit includes clutch springs, weights and a new drive belt. Your service techs will be happy to know that installation is a breeze. There is also no need to tune the clutch, as the weights are specific for the application to make it simple for the installer and the end user. The included drive belt is an upgrade over stock and has a 2-year warranty against any premature failures due to manufacturing. Let your customers know that Trinity Racing offers a variety of quality, American-made UTV performance parts and accessories, a full range of which are available through Parts Unlimited. ■

» Talk to your Parts rep for details and get more information on the lineup in the ATV & UTV catalog.

NEXT LEVEL UTV PERFORMANCE Get the most out of your UTV with a Trinity Racing exhaust system. Each system is specifically designed to increase horsepower and torque, while also improving the exhaust note and the overall aesthetics of your vehicle. Like all Trinity Racing products, this exhaust system is designed and manufactured in the United States of America, hand Tig welded, and bent on top of the line mandrel benders. In addition, there is a 2 year warranty that covers any manufacturer defects or failures. Available now though all Parts Unlimited dealers.

BLACK

TRINITYRACING.COM @TRINITY_RACING 714-988-0339

CERAKOTE

BRUSHED

P R O D U C T

S H O W C A S E

WINCHES

Powerful Preparation

Wireless-Controlled Winch Systems

Warn Industries’ new HUB wireless control system allows riders to control their WARN winches straight from their smart phone. When combined with the AXON winch, the app provides a range of useful digital control and data feedback.

he potent mixture of adrenaline, determination and pride has been getting off-roaders into trouble for decades and, with more than 70 years of off-road know-how, Warn Industries has been helping get them out. A major manufacturer of powersports winch recovery systems, Warn has not only stepped up the company’s winch’s capabilities, but it has also revolutionized how they’re controlled as well.

Warn’s AXON powersports winch features the evolutionary Motactor system – an integrated, high-efficiency motor with digital control and data feedback. HUB allows users to take full advantage of this new-era winch technology, enabling the display of winch load, winch motor temperature and vehicle battery voltage directly on the HUB app. This combination creates a powerful recovery system with seamless functionality.

Warn recently introduced its HUB wireless control systems, intertwining modern-day technology and functionality with the reliable power for which the company is known. HUB allows users to control their winch straight from their smartphone. The HUB receiver simply connects directly to the winch, and is ready to pair with the custom-developed WARN HUB app on any iOS or Android-powered smart device.

In addition to the Motactor innovation, AXON winches are fully equipped with specifically designed features to serve powersports customers. A planetary gear train, Hub-Lock clutch dial, complete metal casing and IP68rated water-resistant construction, AXON offers an ultimate powersports winch package with ease of installation and use backed up by consistent and reliable performance.

This Bluetooth connectivity allows for instantaneous power-in and power-out control of the winch up to 100feet away. The HUB wireless receiver is available for several different WARN powersports winches, including the Vantage and ProVantage, plus the new models, the VRX and AXON. When paired with any of these winches, HUB will also conveniently show users the vehicle’s battery voltage status. However, winch recovery technology gets kicked up a notch when paired with the AXON.

PARTS MAGAZINE

★

SEPTEMBER 2021

For those customers relying on their powersports machines to work the land, Warn developed the VRX to deliver workhouse power and reliability. The highefficiency motor has a low amp draw for longer, more sustained volts with up to 4,500-lbs. of load capacity. Waterproof, metal construction and HUB integration ready, your customers can rest assured they’re prepared for the job for many workweeks to come. ■

» Talk with your Parts sales rep to learn more, and check out the ATV & UTV catalog.

d n a p u r a e g t u o t ge

If your goal over the weekend is to make it and not break it, then you need the right gear. WARN winches, bumpers, and accessories, like the all-new HUB Wireless Receiver, are designed, engineered, and tested to make it in—and make it out. Go prepared.

WINCHES • BUMPERS • WINCH ACCESSORIES • TRAIL GEAR Go to warn.com to see our full line of products

WIRELESS RECEIVER

DRIVE CHAINS

P R O D U C T

S H O W C A S E

Power Transfer

Performance Chains for a Range of Uses

oday’s ATV chains are required to handle the increased torque output of moving two rear wheels as opposed to one wheel as on a motorcycle. This massive torque load places an intense amount of stress on the chain, which can increase or decrease depending on the engine load, the terrain and even the tire features.

MAX X and MAX O

RK Chain has created chain models suitable for use with all ATVs, and the various environments in which they perform.

520EXW One of RK Chain’s most popular ATV rated chain is the 520EXW, an XW-Ring sealed extreme heat performance ATV chain. RK’s XW-Ring seals use triple-barrier grease protection, plus anti-debris technology to help eliminate debris friction between internal components. EXW chains also feature special thermal crack-resistant sideplates to protect against thermal cracking, which often results from debris or components impinging the chain’s movement. The impingement causes the chain to quickly heat up and cool down in rapid succession. Over a period of time this thermal exposure can reduce the strength of the chain and/or cause a chain failure. It is vitally important for customers to check their machines after a crash to make sure no debris is in contact with the chain.

MAX X and MAX O chains are perfectly suitable for weekend warriors and riders who are not seeking a lightweight racing chain, but are still looking for performance. RK’s MAX series offers great functionality while being economically priced.

The EXW is rated up to 750cc and has a max tensile strength rating of 7,700 ft/lbs. EXW is lightweight and is perfectly suitable for professional racing use, and has been the chain of choice for Team Duncan Racing for more than a decade. This multi-function chain can also be used for enduro and GNCC motorcycle racing. Currently Team FMF KTM Factory Racing is using GB520EXW in its off-road racing series. EXW is available in Gold or Natural finish.

If riders want an economically priced chain that features an increased wear-life, RK offers MAX X chain series. MAX X is designed to perform on both ATVs, street and off-road machines. With a tensile strength rating of 9,000 ft/lbs, and a 750cc max cc rating, MAX X can handle a range of ATV performance needs. MAX X is available in Gold, Natural, Chrome, Black/Gold, Black/Chrome, Red, Blue, Green, Orange, Pink or Yellow. MAX O is an O-ring sealed chain that is designed to perform on ATVs, street and off-road machines. MAX O is rated up to 650cc and has a tensile strength rating of 8,500 ft/lbs. MAX O is available in Gold or Natural finish. ■

» Talk with your Parts rep

for details, and get more information in the ATV & UTV, Street and Off-Road catalogs.

PARTS MAGAZINE

★

SEPTEMBER 2021

Duncan Racing Honda ATC 250R Photo by: Pat Carrigan

GB520EXW Chain •

Specifically designed for Off-Road & ATV use

•

RK’s XW-Ring seals utilize triple barrier grease protection plus anti-debris technology

•

Features special thermal crack resistant sideplates to protect against heat cracking.

MODEL

USAGE

TENSILE STRENGTH

WEIGHT

DISPLACEMENT

GB520EXW

ATV & OFF-ROAD

7,700 lbs

3.70 lbs

750cc

CONTACT YOUR PARTS UNLIMITED REPRESENTATIVE TODAY!

RKExcelAmerica.com

P R O D U C T

S H O W C A S E

CHEMICALS & LUBRICANTS

All-Terrain Oil

Made for Hard-Working Four-Wheelers Back then, Bel-Ray was a humble operation in founder Bill Kiefer’s garage. These days, Bel-Ray has moved to much bigger facilities to accommodate all of the industrial, auto and powersports lubricants the company produces. While the formulations might not be made in a New Jersey garage anymore, every product is still manufactured in the United States. One of those products is Bel-Ray ATV & SxS Synthetic 4T engine oil. This 5w50 oil is a premium multi-grade engine oil that provides outstanding performance. And while the oil was formulated specifically for Polaris ATV and side-by-side vehicles, it is a quality choice for all ATV, SxS and UTV makes and models. ATVs and side-by-sides are great because they can go anywhere, which is exactly why they need an oil that can stand up to not just the wear and tear of use, but the elements, too. Rainy days, mud, dirt and other factors are a big consideration for the chemists at Bel-Ray, and the ATV & SxS oil has to provide optimal protection from rust, corrosion and deposits.

Bel-Ray ATV & SxS Synthetic 4T is a premium multi-grade 5w50 engine oil that provides outstanding performance for a variety of ATV, SxS and UTV makes and models.

hat does a modern ATV have in common with an OREO cookie? Yes, that sounds like the beginning of the worst joke ever, but the answer might surprise you. When Bel-Ray first started producing lubricants more than 70 years ago, it wasn’t for powersports vehicles, but for Nabisco’s hightemperature bakery ovens. The same company that helped produce some of America’s most legendary cookies now keeps powersports engines running at their best.

PARTS MAGAZINE

★

SEPTEMBER 2021

This sturdy line of defense is achieved in part by Bel-Ray’s Rust Defense System (RDS). This special formula includes moisture inhibitors, which means engine components stay protected even when vehicles are going through streams, deep mud or other potential rust hazards. The formula even works for frequent, short-run usage.

In all, the chemistry of the ATV & SxS 4T oil is designed for premium protection and durability. The low-volatility base oils help minimize oil consumption, while the high-viscosity index provides improved protection in high temperatures. Bel-Ray’s anti-wear chemistry helps keep engine components in great shape by reducing valvetrain wear and ensuring there is no excess scuffing on the pistons and rings. Keeping an engine clean is a must, too, and it should go without saying that Bel-Ray has designed this oil to keep sludge and varnish deposits from forming. ■

» Talk to your Parts rep to learn more about Bel-Ray’s specialized oils

and lubricants. Find the ATV & SxS 4T oil in the Tire & Service catalog.

PRODUCT NUMBER:

3601-0731

UP TO 4X THE FILM STRENGTH OF LEADING SYNTHETIC OILS Helps protect cams, buckets, crankshaft and minimize pistons scuffing in the most demanding applications.

W W W . B E L R AY. C O M

P R O D U C T

S H O W C A S E

REPLACEMENT PARTS

Value-Packed Replacements Crankshaft and Connecting Rod Kits

Hot Rods is now offering up crankshaft and connecting rod kits, and connecting rod bolts, for 2006-2020 Can-Am Commander, Defender, Outlander and Renegade models.

ot Rods now has crankshaft and connecting rod kits for a range of popular Can-Am side-bysides and ATVs. Previously hard to find outside a Can-Am dealership’s parts department, Hot Rods offers up these kits available for 2006 through 2020 Commander, Defender, Outlander and Renegade models. The kits are offered as direct OEM-replacements for a perfect drop-in fit in everything from the smallest 400/450/500 singles up to the bigger 650/800/850 twins. While the Can-Am crankshaft and connecting rod kits are offered complete – crankshaft, connecting rods and connecting rod bolts – the crankshafts by themselves are available separately as are the connecting rods and the connecting rod bolts. Whichever options are needed, complete kits or individual pieces, all are an attractively priced alternative to OEM. Depending on the component, savings range from 16-percent less than OEM to a full 46-percent below what the factory charges, with no sacrifice in quality.

PARTS MAGAZINE

★

SEPTEMBER 2021

Hot Rods has supplied the powersport aftermarket with OEM-level quality crankshafts and connecting rods for more than 25 years, at considerably less cost than OEM prices. The new Can-Am kits and individual products are no exception. Hot Rods’ Can-Am crankshafts are forged from 4140 steel and precision machined for a direct-fit, drop-in replacement. The connecting rod assemblies, forged from C70S6 alloy, are also OEM-quality and machined for an exactreplacement fit. The required connecting rod bolts (which are torqueto-yield bolts that cannot be used more than once) are replaced with Hot Rods bolt sets, which the company says are unique to the aftermarket. Bolt kits are supplied with four connecting rod bolts to cover all engine applications – twins get four bolts, singles use two bolts. ■

» Talk with your Parts Unlimited sales rep for details on the new Hot Rods Can-Am crankshaft and connecting rod kits. Get further details in the ATV & UTV catalog.

Heat Control for Today’s UTVs

ngines make a lot more heat than horsepower. In fact, for every gallon of gasoline that’s burned in your customers’ UTV engines, only about 25 percent of the available energy goes toward turning the rear wheels. That means roughly 75 percent of each gallon of gas is being converted into decalbubbling, seat-scorching, sweat-inducing heat. That’s a lot of warmth to manage, but thankfully, controlling heat is exactly what Design Engineering Inc. does. Since 1995, Design Engineering Inc. has pursued heatmanagement solutions for the powersports industry. With its Extreme Heat Barrier and Reflect-A-Cool sheeting, as well as exhaust wrap and other heat-reflecting and insulating products, Design Engineering has products that will help protect expensive components and vehicle occupants from extreme heat as they enjoy their side-bysides this summer.

DEI’s model-specific Heat Control Kit offers a perfect fit and easy installation. They are designed to reduce the amount of heat that penetrates the cab of a UTV.

HEAT CONTROL PRODUCTS

Cooler in the Cab

In many of today’s powerful UTVs, engine and exhaust heat radiates causes the cab to heat up like an oven. To address this issue, DEI has developed Heat Control Kits for Can-Am’s Mavericks and Commanders, Honda’s Pioneers and Talon 1000, and the Polaris RZRs. These pre-cut, model-specific kits offer a perfect fit and easy installation, and will greatly reduce the amount of heat that penetrates the cab. Depending on the application, kits include Extreme Heat Barrier and ReflectA-Cool panels that shield the firewall, center-console channel, and the underside of the seats.

DEI also has sheets of Extreme Heat Barrier and Heat Screen for custom applications. They can be used on a variety of surfaces and provide excellent heat shielding.

The workhorse of DEI’s Heat Control Kits is the Extreme Heat Barrier. This multi-layer material features a dimpled 10-mil aluminum face bonded to a 1/8-inch composite glass-fiber core that’s backed with a high-temp adhesive. At only 3/16-inch thick, Extreme Heat Barrier offers effective, low-profile thermal protection that withstands temperatures up to 1750°F. For less demanding areas, DEI implements its Heat Screen, which is a thinner, more flexible material with an aluminized skin, compressedglass insulation liner, and adhesive backing. Both materials are CNC-cut for an exact fit, ensuring maximum coverage and easier installation. DEI’s products also help deaden sound and reduce vibrations. Extreme Heat Barrier is so tough that it also serves as a durable barrier against trail debris, which is especially beneficial for the exposed center-console channel on Honda’s Talons.

custom applications. With their strong adhesive backing, these materials can be used on any number of surfaces including steel, aluminum, carbon fiber, plastic, and more. Use them to replace worn-out OEM heat shielding or apply them anywhere that heat penetration is an issue. ■

Beyond these model-specific UTV kits, DEI also offers sheet kits of Extreme Heat Barrier and Heat Screen for

» Talk with your Parts rep for more details, and check out the product line in the ATV & UTV catalog.

��

SEPTEMBER 2021

★

PARTS MAGAZINE

P R O D U C T

S H O W C A S E

EXHAUSTS

Off-Road Performance Introducing the Power Tune XTO

ince its founding in 1958, S&S Cycle has proven itself as a dominant provider of big, reliable power to the two-wheeled, V-Twin marketplace, whether it be on the street, the track or the white Bonneville flats. Now the company behind all that horsepower and know-how has turned its attention off-road with a fresh line of performance exhausts for popular side-by-side models. The new Power Tune XTO Exhaust shows that the go-fast crew at S&S likes ripping around on four-wheels just as much as they like doing it on two.

After more than 60 years of providing big, reliable power to the V-Twin marketplace, S&S Cycle now offers a line of performance exhausts for popular side-by-side models.

S&S is offering the systems with fitments for Polaris RZR models and the Honda Talon. There are also two versions available, a 49-state legal setup that dealers can bolt onto vehicles on the showroom floor, and a race-only system. The Power Tune XTO incorporates a highly engineered stainless steel muffler body combined with dual exits, each containing a removable spark arrestor as well as tunable inserts. Those adjustable inserts allow your customers to optimize the system for both sound and performance. When your customers are out on the trail and want to wick things up a bit to wide open, they can use the 2¼-inch inserts to really let the engine breathe. Spending the day rock crawling in low? Swap in the 1.375-inch inserts to develop maximum torque. There is a range of other size stainless steel inserts available, each designed to offer customizable power and exhaust note. Parts Unlimited is also carrying the Power Tune XTO insert kit, which includes a lineup of inserts for dialing in the perfect exhaust setup.

The Power Tune XTO incorporates a highly engineered stainless steel muffler body combined with dual exits, each containing a removable spark arrestor as well as tunable inserts.

No matter what the setup, the Power Tune XTO is sure to provide a nice boost in power and torque – after all, it is from S&S – all in a fantastic looking system that can be used with or without the factory rear cover. It is also designed to clear most aftermarket bumpers. ■

» Talk with your Parts sales rep for details, and get

more information in the Parts Unlimited catalogs.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE *Qualified Manufacturer Declared 49-State Federal Emissions Compliant Exhaust System 40

PARTS MAGAZINE

★

SEPTEMBER 2021

Windshield and Storage Options for UTVs

eeping the elements outside and cargo safely secured inside are two of the things at which Moose Utility Division excels. Among the many bodywork and storage options the company offers for UTVs are windshields and bed enclosures.

Moose Utility Division’s full folding deluxe windshields provide plenty of protection, airflow and unobstructed vision for your UTV-driving customers.

PARTS & ACCESSORIES

See and Stash

On some days, like when it’s especially windy or rainy out, a full windshield is absolutely perfect. Other times, though, riders like to have a little bit of airflow and unobstructed visibility while out on the trail or on the job. Moose Utility Division gives UTV riders the best of both worlds with full folding deluxe windshields. When the windshield is completely up, riders get an extra layer between them and the elements. The top of the windshield is designed to work with the lines of the OEM roof, so that there is not a large gap between the two pieces.

The design of the windshield includes three hinges that allow the top part to fold down, all without creating a gap that water can sneak through.

Making the switch from a full windshield to a half windshield is easy since the top part is mounted to the roll cage with two hook-and-loop straps. On the lower part of the full folding windshield, three p-clamps securely attach the whole unit to the roll cage for a sturdy connection. The design of the windshield includes three hinges that allow the top part to fold down, all without creating a gap that water can sneak through. The hinge line has a unique fold to prevent water intrusion. Each full folding windshield is made from a premium 0.177-inch thick polycarbonate material, and UTV customers who ride through a lot of hanging branches or other debris can opt for the hard coated option. The hard coating on both the front and back of the windshield makes the polycarbonate even more scratch resistant. While the windshield keeps things from coming into the vehicle up front, a Moose Utility Division bed enclosure keeps things from falling out of the vehicle at the back. One of the benefits of a bed enclosure is that items are securely stowed but still easy to access.

Moose Utility Division bed enclosure keeps things from falling out of the vehicle, but still provides easy access to items stowed in the bed.

Mounting the enclosure is simple and fast thanks to four built-in anchor points. With just four screws, the enclosure is secure enough to haul tools, coolers or other cargo without worry. The bed enclosure is made from a 12-gauge powder coated steel for premium strength and durability. ■

» Talk to your Parts rep about Moose Utility Division’s windshields, bed enclosures and other versatile UTV parts and accessories. You can find everything in the ATV & UTV catalog.

��

SEPTEMBER 2021

★

PARTS MAGAZINE

CHEMICALS & LUBRICANTS

P R O D U C T

S H O W C A S E

Smooth Operator

High-Quality Lubricants for ATVs and UTVs Suspension components are subject to a great amount of friction-induced heat, especially in highperformance, sport models. LIQUI MOLY’s 5W Light fork oil is a fully synthetic, universal oil formulated for use in a wide variety of telescopic forks and shock absorbers. Your customers will appreciate LIQUI MOLY’s unique formula designed to prevent shear loss and provide full performance, even after extended usage. Additionally, this fork oil prevents foaming to maintain its lubricating qualities and keep seals in healthy condition to prevent leaks.

LIQUI MOLY offers two different weight and viscosity ATV/UTV engine oils, both specifically developed for use in four-wheeler powersports machines.

rom sport ATVs and UTVs to utility four-wheelers, these machines play an important role for your customers in both recreation and hard work. With new and used machines sales skyrocketing over the recent year, the number of customers with fourwheeled powersports vehicles in their garages and barns is arguably the highest it’s been. This means maintenance needs are reaching new heights as well.

Of course, there are several other moving components in ATVs and UTVs that complete drivetrain and suspension systems. From CV drive joints to A-arm bushings, ball joints and U-joints, these heavily loaded points are subject to excessive, damage-causing heat and friction. LIQUI MOLY’s Long-Life Grease + MoS2 is a high-performance grease equipped with molybdenum disulfide (MoS2) that provides outstanding component protection in highfriction, extreme load environments. ■

» Talk with your Parts Unlimited rep for details, and also check out the line in the Tire & Service catalog.

General maintenance is one of the most crucial keys to longlasting, well-running machines, and quality lubrication plays a critical role. Born from and still employing true motorsports enthusiasts, LIQUI MOLY has aimed to bring a wide range of quality lubrication products to garages and shops worldwide for more than 60 years. LIQUI MOLY has established a strong lineup of highquality lubricants developed specifically for ATVs and UTVs. Beginning with the heart of the machine, LIQUI MOLY offers two different weight and viscosity ATV/UTV engine oils. Available in both 5W-50 and 10W-40, these fully synthetic, high-performance oils were formulated for 4-stroke ATV and UTV engines with or without wet clutch systems. LIQUI MOLY takes measures to ensure their engine oils meet many OE-recommended specifications, and these oils specifically are held to API SN Plus and JASO MA2 specifications. LIQUI MOLY’s ATV/UTV oil formula aims to promote long engine component life and smooth operating performance. These engine oils were formulated for clean operation, even after prolonged use, as well as to reduce friction, reducing bearing and other engine component wear. Riders and drivers will also appreciate smooth clutch modulation and gear shifting.

PARTS MAGAZINE

★

SEPTEMBER 2021

The suspensions on today’s highperformance ATVs and UTVs really take a beating off-road. LIQUI MOLY’s 5W Light fork oil provides full performance even after extended usage.

LIQUI MOLY’s Long-Life Grease + MoS2

Multimedia Source Units for UTVs

erformance UTVs have opened a new world of experiences for enthusiasts along with an array of aftermarket options to enhance the ride. Among those options are audio systems, and MB Quart has remained at the forefront of that development. Whether your customers are fitting their UTV with a simple soundbar or a comprehensive, model-tuned sound system, an interface that delivers sleek and reliable function to control their tunes is crucial. MB Quart’s GMR-LED Nautic multimedia source unit is a 160-watt interface prepared to help your customers play music from just about any source they please, including AM/FM, Blutetooth, auxiliary, USB and even video input for backup cameras. These units are included in MB Quart’s Polaris RZR and Can-Am X3 tuned audio kits but can be used with a variety of their other audio drivers. User-friendly capability was prioritized when designing these source units. MB Quart’s Secure Simple Pairing and Quick-Pair helps create reliable and fast Bluetooth connections that will automatically reconnect when the

MB Quart’s GMR-LED Nautic multimedia source unit is a 160-watt interface prepared to help your customers play music from just about any source they please.

unit is powered on. Additionally, the Radial Shift UX lays out menu selections with a simple, yet intuitive, design. MB Quart knows your customers will most likely be putting their vehicles through everything from dust to mud, so the GMR-LED source units are built to meet IPX67 requirements for water and dustproofing and are tested and proven in abusive conditions. ■

» For more information on MB Quart’s source units, contact your Parts Rep and check them out in the ATV & UTV catalog.

AUDIO UPGRADES

Music Under Control

P R O D U C T

S H O W C A S E

COVERS

Full Coverage

Stowage, Luggage Options for UTVs

The Defender Extreme Pro is designed to fit most UTV models up to 72-inches wide

elson-Rigg has the UTV segment covered, quite literally. The Rigg Gear UTV lineup has been growing, with the upgraded Defender Extreme Pro heavy-duty two-seat and four-seat covers leading the collection. Defender Extreme covers are already a hit with motorcycle riders, and the new UTV version promises to be just as popular. Designed to fit most sport and utility UTV models up to 72 inches wide, the Defender Extreme Pro covers are made with Nelson-Rigg’s proprietary UltraMax fabric for maximum UV protection, which means no fading. It’s even warrantied. Heat-taped seams ensure a

waterproof seal, and Perma-Venting keeps air flowing. A large driver’s side zipper makes accessing the cab easy. It’s important to keep cargo dry, too, which is why the Rigg Gear line includes the Hurricane Waterproof UTV Cargo Bag. Three inner mesh pockets secure small items, while a main divider allows the bag to be one big compartment or two smaller ones. Interior panels can be removed, too, when the bag needs to squeeze into a small space. Outer straps ensure the bag stays put. The UTV Hydration/Storage bag fits between the seats of most UTVs, allowing easy access to an insulated main compartment and housing a 2-liter bladder for each rider. Outer pockets stow small items, and the sturdy UltraMax fabric is fade-free. Rigg Gear wouldn’t be complete without the Trails End tool bag set, which includes a large Tool Roll. It’s made with UltraMax fabric, a MOLLE accessory panel on the top lid and internal organization details. ■

» Get more details on the Rigg Gear UTV line from your Parts rep and find it all in the ATV & UTV catalog.

Polaris 800 Engine Rebuild Kits

olaris 800 models are designed to be tough, but as the hours and the loads add up, those engines will be ready for a rebuild. ProX is proud to offer its first UTV engine rebuild kit, which is for Polaris 800 models. It seemed natural to begin with that group of UTV models since they are such a popular choice for performing tough tasks day-in and day-out.

These new UTV engine rebuild kits from ProX are an OEM-upgrade built specifically for Polaris 800 models, and include everything necessary to get the job done right.

To ensure the best results, ProX bought a used 0R 800 engine, rebuilt it with OEM parts and performed benchmark testing on an in-house dyno. The ProX R&D team used this data to develop a kit with components that exceed OEM quality.

bearings in the big end provide very precise bearing clearances, and the result is increased longevity and reliability.

Suitable for the RZR 800, Sportsman 800 and Ranger 800, the ProX engine rebuild kit includes a complete crankshaft assembly; piston kits complete with piston, rings, wrist pins and circlips. There is also a complete gasket kit with all gaskets and seals necessary for the job plus a packet of Maxima assembly lube.

To make the kit more convenient, the crankshaft assembly comes completely assembled with Maxima assembly lube and Koyo main bearings sourced from Japan. Additionally, the kits have the option of A, B or C graded piston sizing, allowing customers to get the right piston to wall clearance, even in used cylinders.

The connecting rods are a proprietary design developed by ProX’s engineers to be superior to OEM. Graded

ENGINE REBUILD KITS

Building Up

» Talk to your Parts rep about the new ProX Polaris 800

engine rebuild kit and find it in the ATV & UTV catalog.

RESTORING POWER, REMOVING GUESS WORK Engine Rebuild Kits Melding Quality, Convenience, and Value for Polaris 800 UTVs & ATVs • Developed through R&D on in-house dyno with RZR 800 engine • Includes complete crankshaft assembly, Japanese-sourced main bearings, gaskets and seals, pistons with rings, wrist pins, and circlips, plus Maxima® assembly lube all in one box under one part # • Proprietary connecting rod design improves strength and durability over OEM with specific forging and alloy treatment processes • Graded bearings utilized in connecting rod big ends ensure precise clearance for reliable operation • Pistons cast from OEM-grade alloy and feature skirt coating and hard-anodized crown and ring grooves for improved performance and wear resistance • Available in A/B/C graded bore sizes to help fit individual customers’ needs AVAILABLE FOR POLARIS RZR, SPORTSMAN, AND RANGER 800 MODELS!

CONTACT YOUR PARTS REP FOR COMPLETE PRODUCT AND APPLICATION INFO! www.RaceWinningBrands.com

Pro-x.com | 440-951-6600 | Questions@pro-x.com

P R O D U C T

S H O W C A S E

BRAKE PRODUCTS

Easy Upgrades

Brake Pads for High-Performance ATVs and UTVs Renegade/Outlanders and specifies DP as an approved aftermarket upgrade. DP Brakes’ sintered metallic brake pads provide shorter stopping distances and are designed for long-lasting performance. They’re available for a range of 1000cc UTVs.

et your customers know that DP Brakes now has its sintered-metallic brake pads available for all the new Kawasaki KRX1000 models. Those Kawasaki applications – DP706 front and DP707 rear – are the latest additions to a long line of DP upgrade braking for popular ATVs and UTVs. Machines like the Arctic Cat Wildcat 1000s, Honda Pioneer 1000s, Polaris RZR1000s and Yamaha YXZ1000s are already covered. And, as testament to just how well all those DP pads perform, Can-Am tapped them as OE in late-model

That shouldn’t be surprising. For years winning racers in almost every ATV/UTV class have relied on DP’s sintered-metallic brake pads, and countless recreational and every-day use riders have also switched to DP. With DP pads ATVs and UTVs slow down and stop quicker in shorter distances and with more rider control and feel than OE. That high-level feel and performance also lasts a good, long while. DP pads can deliver two to three times the service life of OE brake pads and do it while remaining easy on the rotors. To guard against brake fade DP’s ATV/UTV pads also feature ceramic heat shields permanently bonded onto the baking plates. They’re quiet so there’s no squealing, and they’re clean, never leaving a layer of dust on the wheels and tires. ■

» Talk to your Parts Unlimited rep for details. The ATV & UTV catalog lists all the applications.

Stainless Steel Exhaust Systems for UTVs

DR Off-Road brings 30 years of experience to the UTV exhaust market with systems born from the automotive exhaust manufacturer and sister company, Flowmaster.

The company’s exhaust systems feature stainless steel construction throughout, and utilize a baffled muffler design uniquely adapted to UTVs. While fiberglass-packed mufflers are common, the consistent high rpm nature of UTVs will require them to be frequently disassembled and re-packed, the company says. Aiming to decrease maintenance, XDR’s welded-in baffle-style mufflers require no packing material whatsoever. These mufflers deliver a consistent, throaty sound that speaks performance without an unwanted, tinny pitch. These systems are available in both single outlet and dual outlet configurations for most applications. Dual outlet systems feature spark arrestors designed by XDR that comply with US Forestry Service regulations. For stricter competition rules, XDR designed the single outlet systems to easily accept OEM spark arrestors.

XDR’s stainless steel exhaust systems feature a baffled design uniquely adapted to UTVs. They provide a performance boost and a consistent throaty sound.

Attention to detail continues with a laser-cut heat shield that provides both a trick look and heat protection on most models. Dual outlet systems add to the unique look with stainless steel tips fitted with black anodized rings that tuck cleanly under the tail section of the car. XDR exhaust systems are available for a wide range of popular UTV models from Can-Am Polaris and Yamaha, and are tested for a precise fit and no-hassle installation. Plus, they all carry a lifetime warranty so your customers can rest easy knowing their equipment is covered. ■

» For more information, contact your Parts Rep. Learn more in the ATV & UTV catalog.

EXHAUSTS

Audible Performance

P R O D U C T

S H O W C A S E

PISTONS

UTV Pistons

New Range for 1000cc Machines Yamaha. Depending on the application, there are pistons with everything from stock OEM compression ratios to super high-performance pistons sporting a tight-squeeze 12.5:1 CR. All applications come with Wössner’s 35 years of experience behind them, and a decades-long history of top racers worldwide all relying on Wössner.

Wössner now has a complete lineup of replacement and performance pistons for a variety of 1000cc side-by-side models.

oday’s range of 1000cc side-by-sides are bigger, faster, more powerful and more popular than ever. Now, Wössner North American has a new lineup of replacement and performance pistons for them all. The piston offerings cover all the popular 1000cc models from Arctic Cat, Can-Am, Honda, Kawasaki, Polaris and

Parts Unlimited Ad_2020.pdf 1 5/19/2020 6:43:16 PM

For the new lineup, Wössner is using premiumgrade 4032 and 2618 aluminum alloys. Everything is designed, forged and machined to ultra-close tolerances for fit and finish in-house at Wossner’s Weil am Rhein production facility. To assure quality, the pistons are tested with Finite Element Analysis (FEA) computer simulation.

All these Wössner pistons are lightweight, feature a strong, double-bridged design, and are designed to run with tight wall-clearances for reduced noise and increased performance. ■

» Talk with your Parts Unlimited sales rep for details, and get more information in the ATV & UTV catalog.

CHAIN & SPROCKET KITS

ATV Chain and Sprocket Kits Everything Needed in One Box

egina Chain has taken all the guesswork and parts-searching out of piecing together a full chain-and-sprocket replacement set for an ATV – if there are any machines in powersport needing regular chain-and-sprocket attention it’s those ATVs. Bigger, faster, heavier than ever, and routinely ridden in the worst conditions, an ATV’s drivetrain leads a tough life. Replacing worn chains and sprockets is just the price of admission to the fun that an ATV delivers. However, putting together the correct replacement package can quickly become tedious. Looking to ease the process, Regina now offers model-specific chain and sprocket kits. One part number gets everything needed to fully overhaul the drivetrain, and there are direct-fit kits available for the most popular ATVs, everything from the small-displacement machines to the biggest, mostpowerful of the bunch. Each kit comes with a set of durable, heat-treated and induction-hardened steel sprockets with the stock tooth count, and a matching, cut-to-length sealed chain. Featuring

Regina Chain offers model-specific sprocket and chain kits, with applications for most popular ATV models.

shot-peened components throughout for maximum fatigue resistance, these chains are tough. They’re assembled with extra-thick side plates and high-carbon alloy steel pins with solid bushings and rollers, all specifically designed to withstand the shock loads an ATV will dish out. To ensure a long service life, all this is protected with Regina’s patented Z-Rings sealing in lubricant and sealing out dirt. ■

» Your rep can tell you more about the easy-fit Regina chain and sprocket kits. The ATV & UTV catalog has the applications.

20 1919 -

PROUDLY MADE IN ITALY SINCE 1919 S A R Y E CE MAN FOR ION PER OT IN M

DUCATI

P R O D U C T

S H O W C A S E

TIRES

Championship Traction

Competition-Developed Trials Tires harsh impacts without going flat. The Dunlop D803GP is my tire of choice for everything from the slick terrain out East to the big, grippy rocks out West.”

Dunlop has worked closely with professional trials rider Pat Smage in developing the company’s trials tires. “Dunlop tires have been providing me with all the traction I need since I started riding Nationals,” Smage said.

Dunlop’s D803GP is a radial, sticky trials tire that was designed for professional and amateur trials riders alike. Their compliant carcass construction helps provide highlevel traction, while their revised compound and design improves slide control and shock absorption. D803GP tires are available in both front and rear sizes of 80/100-21 and 120/100R18, respectively.

unique trait of motorcycle competition is not only the number of racing disciplines, but how much they can differ in machines, course terrain, rider demands and bike setup. Whether your customers are enthusiasts in off-road, street or anything in between, Dunlop is committed to developing tires that connect riders to fun, thrill and victory.

Dunlop’s D803GP is a radial, sticky trials tire that was designed for professional and amateur trials riders alike.

Virtually all forms of riding require a tire that hooks up and withstands hard use, and trials is certainly no exception. As avid riders and enthusiasts themselves, Dunlop recognized the need for the elevated tire performance needed in trials riding and competition. Trials riders maneuver their machines up, down and over obstacles many motorcyclists wouldn’t event think possible, which is why traction is crucial. Someone who knows first-hand the demands a trials tire must meet is professional rider, Pat Smage. Pat isn’t just a professional trials competitor, he possesses incredible craft and skill on a motorcycle, which is reflected in his eleven US National Trials Championships. Dunlop has a history of working with top athletes to develop and fine tune the company’s tires, and they’ve been working directly with Pat throughout every one of his championships, and even before. “A huge part of trials is finding traction, and Dunlop tires have been providing me with all the traction I need since I started riding Nationals,” Smage said. “You need a tire that works well in all conditions – that can be ran low enough to form around rocks while being strong enough to take

PARTS MAGAZINE

★

SEPTEMBER 2021

The development of the title-winning D803GP hasn’t just benefitted trials riders, it’s also led to the establishment of the versatile K950 rear tire. The K950 is a DOT approved tire that delivers performance in trials and off-road settings with the additional durability needed for on-road capability, making it a great option for dual-sport riders. Available in a 4.00-18 size, the K950’s bias-ply construction, compounds and tread pattern are ready to tackle a variety of off-road terrain in both wet and dry conditions. ■

» Contact your Parts rep for details, and learn more in the Tire & Service catalog.

COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS COLT NICHOLS

2022 PRIME STATUS RACEWEAR

NEVER STATUS QUO.

THORMX.COM | @THORMXOFFICIAL

2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS 2022 PRIME STATUS

#THEFEELOFMOTO

P R O D U C T

S H O W C A S E

RIDING APPAREL

Precision Racewear

Redesigned Gear for Every Riding Style These performance enhancing characteristics carry through to Prime pants, with even a few more rider-focused features added. THOR’s In-Motion fabric is utilized throughout the pants, providing both mobility and durability. Because a precision fit at the waist is crucial, Prime pants utilize a ratchet-style closure system at the front plus a lay-flat cinch system on the sides. In combination with a lightweight, pre-curved chassis design and spandex stretch panels, your customers can secure the exact fit and comfort they need. Of course, THOR’s designers established six different colorways and designs for a factory look as good as it performs. Looking fresh with a different set of gear for every race is something every rider may want, but it’s likely unrealistic for some of your customers. However, they don’t want to sacrifice comfort and performance just to get longer lasting gear. Being riders and racers themselves, the THOR crew understands the need for racewear that balances performance and durability, and they’re delivering that with their 2022 Pulse line.

THOR Pulse Counting Sheep

here are certain brand names in Powersports that have embedded themselves as a permanent fixture customers expect to see. Experience is irreplaceable, and evolving with the sport over five decades has helped establish THOR as a staple in motocross racewear.

Pulse defies convention with a carefully designed hybrid of durability, ventilation and flexibility. Starting with the piece that’s likely to take the most wear-prone abuse, Pulse pants are constructed with 600D polyester in high wear zones and proprietary In-Motion fabric panels throughout to improve flexibility while maintaining wear resistance. The seat is built with durable nylon,

The iconic Viking logo and THOR name is synonymous with performance and victory, as demonstrated by THOR/KTM rider Cooper Webb’s 2021 Supercross Championship, as well as THOR/Star Yamaha’s Colt Nichol and Justin Cooper’s 250cc victories. This is no happy accident; THOR has been developing its Prime racewear line directly with top athletes for years, and for 2022, the improvement continues. After thousands of test hours and feedback from top racers, the 2022 Prime collection received a new chassis constructed with lightweight and abrasion-tolerant materials to improve breathability and mobility of the racewear line. A hybrid jersey fit with set-in style tailored sleeves featuring four-way stretch, tapered collars and cuffs and flat-stitched, minimal seams provide a precise fit your customers are looking for with flexibility that follows the movement of the body. Managing temperature is as important as mobility, which is why THOR fitted the new Prime racewear with laser perforation and ventilation holes in moisture wicking material.

PARTS MAGAZINE

★

SEPTEMBER 2021

THOR Pulse Air React

THOR

THOR Sector Minimal

while full-grain leather inner knee panels stand up to bike gripping, even with knee braces. The pre-curved chassis design was engineered to assume active riding positioning, providing seamless movement with the rider. Pulse jerseys are designed with a performance fit and constructed with durable polyester main fabric, hybrid, set-in sleeves and four-way stretch cuff and collars for a non-bulky fit that moves and stretches with the rider. Additionally, dimple mesh paneling and laser-cut ventilation help keep air flowing to the rider.

THOR Prime Theory

Sector pants keep the performance and value rolling with integrated stretch panels, a pre-curved design and a ratcheting waist closure for enhanced rider comfort and mobility. They’re also built with abrasion tolerant materials and durable stitching throughout, providing longevity that will have riders keeping their Sector set in their gear bags for seasons to come. A total of four different designs in eleven different colorways makes Sector a great option. ■

» Talk with your Parts rep for details and get more information in the Helmet & Apparel catalog.

For those extra hot motocross days, Pulse Air racewear shares all the same performance and fitment features of standard Pulse, but with the benefit of engineered mesh panels on the jersey and pants for maximum ventilation. Between Pulse and Pulse Air, your customers have a variety of styles and prints to choose from, including eye-catching graphics that make a statement to clean lines and simple, complementary colors. For as many serious racers that demand performance are out there, there are just as many weekend warriors and entry-level riders that have the same passion for riding. THOR believes that someone looking for more budget friendly, entry-level gear shouldn’t have to sacrifice quality, comfort or aesthetic. All riders deserve style and function, and the completely redesigned 2022 Sector line boasts clean graphics, modern color options and performance updates. These new model Sector jerseys feature hybrid style sleeves for optimal mobility and a drop tail design that helps them stay tucked in while riding. They also utilize moisture-wicking material, tag-free neck labels and no-fade sublimated graphics for good looking comfort that lasts.

��

THOR Prime Hero

SEPTEMBER 2021

★

PARTS MAGAZINE

P R O D U C T

S H O W C A S E

SEATS

Rebellious Streak Seats Made for a Honda

success story for Mustang, so of course the brand is eager to give Rebel 1100 riders a big upgrade in comfort while still maintaining the low, streamlined look of the Rebel. Each Mustang Tripper solo seat for the Rebel has a contoured, bucketed design. This keeps things looking low and lean, but it also adds an extra layer of comfort and stability for the rider, preventing them from sliding backwards. The tall 6 inches of rise at the back is like having a built-in backrest.

Mustang’s signature bucket-seat styling gives the rider a feeling of sitting in the motorcycle with excellent lower lumbar support.

Additionally, the bucket styling helps a rider feel like they are sitting in the motorcycle, making them more a part of the machine than a standard OEM seat that one simply sits on. Mustang uses this design as a great way to improve control and confidence, all without vastly altering the reach to the controls or the ground compared to the stock seat. The Tripper solo seat for the 2017-2021 Rebel 300 and 500 is 12 inches wide, meaning it’s wider than stock, and the seat for the 2021 Rebel 1100 measures in at 11 inches wide. For all three models, the Tripper passenger seat provides an ample 10 inches of width.

The newly released Tripper Solo and matching Passenger seats for Honda Rebel 1100. Mustang’s Tripper platform delivers long-haul comfort for Rebels without the bulk of a traditional touring seat.

Underneath the Tripper solo seat is a marine-grade fiberglass baseplate equipped with polyurethane bumpers to absorb vibration. Up top, the material has all the style of leather, but it’s actually an extremely durable hand-stitched expanded vinyl. It’s what Mustang Seats puts between those two layers that really makes a difference. Mustang’s proprietary controlled-density foam is formulated to be soft enough to provide a comfortable ride, while still being resilient enough to stand up to long days in the saddle. Customers trying out a Tripper seat might think it feels firm, but after about 15 minutes, the foam compresses and molds itself to the rider’s body to provide a tailored fit. The result is premium comfort that lasts ride after ride, thanks to the foam’s resilience.

hen Honda announced the Rebel 1100, Mustang Seats knew exactly what to make first for the new model – a Tripper solo seat and matching passenger seat. The Tripper seat for the Honda Rebel 300 and 500 is already a massive

PARTS MAGAZINE

★

SEPTEMBER 2021

The foam is compounded and molded in-house at the Mustang Seats facility in Three Rivers, Massachusetts. Each seat is hand-assembled there from premium raw materials. ■

» Talk with your Parts rep about the new Tripper solo and passenger seats for the Honda Rebel 1100, and get all the available Tripper fitments in the Street catalog.

World Class Motorcycle Seats

HANDCRAFTED in the U.s.a.

TRIPPER SOLO™

P/N 0810-2146 Passenger for Honda Rebel 300/500

for Honda Rebel 300, 500, and 1100

P/N 0810-2145 Solo for Honda Rebel 300/500 Fitment also available Honda Rebel 1100

WWW.MUSTANGSEATS.COM

S P E C I A L

F E AT U R E Each competitor in the Build. Train. Race program is customizing a Royal Enfield Continental GT 650 to run in the three-race championship.

BUILD. TRAIN. RACE.

ROYA L E NF IEL D G E TS ROL L ING WITH MOTOA MER IC A ROYAL ENFIELD GETS ROLLING WITH MOTOAMERICA he beginning of the newest class of racing in the MotoAmerica Series was set for its debut at Brainerd International Raceway at the end of July with the start of the three-round Royal Enfield Build. Train. Race series.

What makes this different from any other racing class, you ask? Well, how’s this for starters? The races are for female riders of various levels who will be road racing Royal Enfield Continental GT 650s they have personally customized in a three-race championship. The races were

set for the last weekend of July at Brainerd, Minnesota, at Pittsburgh International Race Complex in Wampum, Pennsylvania on August 13-15, and Barber Motorsports Park in Birmingham, Alabama on September 17-19. “I think it’s great that we are working with Royal Enfield and its program to get more women involved in road racing,” said MotoAmerica President Wayne Rainey. “I know our fans are going to be stoked to see what these talented women racers come up with in their design and preparation of their motorcycles, and to see them battle on the racetrack will be the icing on the cake.” The women racers are being mentored by Melissa Paris, who has road raced around the world on various motorcycles. “MotoAmerica is the premier class of road racing in the United States, and we can’t begin to describe how honored we are to have the Build. Train. Race road race program included in the series this year,” said Bree Poland, Royal Enfield’s Global Brand Manager, Continental GT Program. “The women who are participating in this program have never built a race bike or raced before. This is literally a dream come true and they are anxious to get training and get out there with the rest of the paddock.

Builder/riders Trisha Dahl (left) and Scarlett Grosselanghorst (right) are two of the competitors in the Royal Enfield Build. Train. Race program.

PARTS MAGAZINE

★

SEPTEMBER 2021

“The Continental GT650 is the perfect motorcycle for people looking to get into road racing and the MotoAmerica and the BTR program is the perfect partnership to showcase that.” ■

P R O D U C T

S H O W C A S E

RIDING APPAREL

Built for Speed

Classic Sportbike Gear Goes Modern In the years following the jacket’s release, leather became really expensive. By 2013, the cost of it made the Motorhead more trouble than it was worth, quite literally, and Icon ceased production of it. By the spring of 2016, costs were more reasonable, and Icon debuted the Motorhead2. This new version got a big upgrade – instead of bulky foam armor, the Motorhead2 featured sleek, high-tech D3O armor. Now, the Icon Motorhead3 is ready to hit the streets. Once again, the design has gotten some changes. Riders want a jacket they can use every day, no matter what the weather has in store for them. The Motorhead jacket already had a removable quilted liner for cold days, and now the Motorhead3 has a waterproof liner for rainy days, too. The Motorhead3 also has a new chassis, moving from Icon’s relaxed fit to the sport fit for a sleeker silhouette and more tailored look.

hile making the 2007 film Planet Terror, director Robert Rodriguez was sporting the Icon Motorhead leather jacket behind the camera. Rubbing shoulders with Hollywood stars is nice, but keeping the shoulders of motorcycle riders securely protected from encounters with the asphalt is even better. By blending edgy looks with all of the rider-centric features motorcyclists want, Icon has turned many of its helmets and gear into, well, Icons. That is why some of the brand’s gear has been resurrected over the years, or was never out of rotation to begin with. Styles and materials get updated, but the attitude and name remain the same. This fall, Icon is releasing the latest generation of its Motorhead jacket. While Rodriguez wore the first version, this newest one is the third iteration. Some of the hallmarks are still there, like the durable leather construction and large Icon badge, but a lot has been improved and updated. The original Motorhead was one of the most popular jackets from the early days of Icon. It had a lot going for it in addition to its cool styling, like body armor and leather construction. However, it also had a few things that needed improvement, namely, the body armor and leather construction. That doesn’t mean the first Motorhead was a flawed design. Rather, body armor and leather options have come a long way in the past 17 years.

PARTS MAGAZINE

★

SEPTEMBER 2021

Icon's Motorhead3 is a redesigned version of the company's popular leather jacket. It features a quilted liner for cold days, and a waterproof liner for rainy ones.

Continuous improvement is always the goal at Icon. No one wants to buy a jacket with the same features and materials as something that was cutting-edge 10 years ago. The Motorhead3 has an improved fit, a better mix of leather and synthetic materials and a waterproof liner, making it a big upgrade over the original. ■

» Talk to your Parts rep about the rebirth of an Icon classic and find all of the options in the Helmet & Apparel catalog.

LUGGAGE

P R O D U C T

S H O W C A S E

Loaded Up for Adventure Luggage that’s Ready for Anything

Moose Racing’s new Kenai Series Adventure Luggage is designed to be practical, spacious and every bit as tough as the environments they will be hauling gear through.

dventure riding continues to be a thriving segment of the motorcycle industry which means brands like Moose Racing are giving Adventure riders more options than ever before to help them get packed up and out on the road, or wherever the adventure leads. Since Adventure bikes are made to go anywhere, it’s important that luggage can do the same while keeping everything that’s packed inside dry and secure. The latest addition to Moose Racing’s Adventure lineup is the new Kenai Series Adventure Luggage. These aluminum side and top cases are designed to be practical, spacious and every bit as tough as the environments they will be hauling gear through.

The Kenai Series aluminum top cases feature four built-in cargo hooks on the exterior, and interior mats that provide grip to stop cargo from shifting while riding.

PARTS MAGAZINE

★

SEPTEMBER 2021

The Kenai Series includes side cases in 36-liter and 47-liter sizes, plus a top case in 37-liter and 48-liter sizes. The cases are all constructed of a high-quality hardened aluminum alloy. The sturdy material has been topped with a clear anodized finish to keep the aluminum looking bright and new, no matter what they are put through on a bike. Additionally, built-in case guards reduce the chance of a case getting damaged during use. One of the most interesting features of the Kenai Series luggage is the patented Kenai lock system. An integrated

The cases convert from motorcycle luggage to hand luggage in an instant. The Kenai lock system allows a rider to quickly detach the case from the mount, and the handle can then be used to easily carry the case. Moose Racing designed the Kenai Series side cases to be self-standing when they are removed from the bike, making them even more convenient for carrying as luggage.

Both the top cases and side cases have waterproof double sealing lids. The side cases open outward, offering riders quick access to stored cargo.

The side and top cases are, of course, built to keep the contents inside not just secure, but safe from the elements, too. The waterproof double sealing lid and compartment closure make sure that water can’t sneak into the case.

MOOSE RACING

AISI 304 stainless steel lock system incorporates the locking mechanism and handle, both securing the cases to their mounts and securing the contents of the cases. Just one key operates the mount and trunk lid.

Inside, a folding tray makes it easy to access contents when the lid is open, and it helps prevent contents from falling out. The right-side case is equipped with a cargo net, too, and there are a few other optional accessories to enhance storage and organization inside the side cases. A detachable inner mesh net helps things stay secure, even when the lid is open, and an expandable inner storage bag can be used with both the side and top cases. The largest of the Kenai Series side cases, the 47-liter option, is big enough to stow two helmets, if necessary. Dealers should note that depending on the application, it might be necessary to pair a large side case on one side with the smaller, 36-liter case on the other side to make room for the exhaust. Despite the size difference, the end result will be a better-balanced motorcycle and a more streamlined look.

Moose Racing offers mounting kits with fitments for a wide range of popular Adventure bike models.

The Kenai Series aluminum top cases feature four built-in cargo hooks on the exterior. These strong stainless steel hooks are ideal mounting points that can accommodate additional storage solutions.

such a robust size because it provides an extremely strong mounting base for the side cases and all of their contents. To further add to its strength and rigidity, a rear crossbar design resists flexing and damage. The mounts are powder coated to prevent corrosion.

Inside, the top cases have a mat on the bottom that provides a lot more grip than bare aluminum. It is designed to help prevent cargo from shifting while the ride is underway.

The mounting plates are application specific. Dealers can head to the Moose Racing website for installation instructions, and all mounting hardware is included in each kit.

Riders who will have a passenger along for the adventure can opt for the back rest attachment, which will mount to both sizes of the top case to give an extra layer of comfort.

Moose Racing offers two mounting options for the Kenai Series top cases, including an aluminum mounting plate and a composite mounting plate. ■

Of course, all of these cases need a corresponding Kenai Series mounting kit. With fitments for a wide range of popular Adventure models, the side case mounting kits are made from ¾-inch tubing. Moose Racing chose to use

» Talk to your Parts rep to learn more about the new Kenai

Series Adventure Luggage from Moose Racing. You can find the luggage as well as the rest of the brand’s Adventure options in the Street and Moose Racing catalogs.

��

SEPTEMBER 2021

★

PARTS MAGAZINE

P R O D U C T

S H O W C A S E

HELMETS

High-Tech Protection The SM5 Helmet

Alpinestars’ new SM5 helmet is the result of more than five years of intensive study, development and testing. The lightweight helmet is designed to deliver optimal protection and comfort.

he all-new SM5 helmet is the result of more than five years of intensive study, development and testing. Designed and tested completely in-house at the Alpinestars Helmet Division, Alpinestars scrutinized every possible aspect to engineer a helmet that is protective, light, and thoughtfully designed to deliver optimal protection and comfort. This lightweight helmet features a thermo-injected shell that incorporates a special polymer blend enhanced by varying degrees of thickness. It is engineered to deliver the optimal combination of impact protection and light weight. The five-density EPS liner ensures the correct density in the right area for enhanced impact absorption. Key design features include an engineered raised area with padding to effectively reduce the forces transmitted to the collarbone, an emergency release system and removable cheek pads to permit the easy removal of the cheek pads while the helmet is still on. A patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of a possible impact.

PARTS MAGAZINE

★

SEPTEMBER 2021

This attention to detail even extends to the soft textile chinstrap, which at 26mm is wider than certification requirements for optimal protection and rider comfort. Stainless steel D-rings ensure a tight and secure fit. Rider comfort is also at the forefront of the SM5’s design, which boasts a visor that has been specifically designed to direct air into the ports for enhanced airflow, while the multi-air inlets and exhaust ports ensure high levels effective ventilation. This helmet is also equipped with hydration tube channels that are integrated into the helmet’s cheek pads for convenience and performance, and a removable comfort liner with SILVERPLUS® treated anti-bacterial fabrics for excellent moisture wicking. The anti-microbial liner is also washable, and the 3D contoured foam ensures rider comfort. The SM5 helmet conforms to DOT certification. A size Medium weighs 1260g (ECE) 1370g (DOT). ■

» Talk with your Parts rep for details and get more information in the Helmet & Apparel catalog.

Strong Forgings for Increased Strength

hen it comes to pursuing new technologies to improve the pistons at the heart of your customers’ engines, JE Pistons is on the gas. The company’s most recent R&D efforts have yielded a new lineup of Ultra Series pistons featuring JE’s proprietary Aligned Grain Flow Technology. The result is an ultra-durable piston designed to optimize highperformance, forced-induction engines. Stuffing more air into the cylinders via supercharging or turbocharging is a very effective way to increase engine performance, but it puts added strain on components, especially the pistons. JE’s new Ultra Series pistons are specifically designed to operate in that high-pressure, highheat environment thanks to a variety of innovative features, including JE’s new Aligned Grain Flow Technology. This new forging technology is at the heart of the Ultra Series, and works to direct the grain flow of the aluminum around critical areas of the piston, increasing strength. Perfecting this proprietary forging process was no easy task, but it was made possible by the fact that all of JE’s production happen in-house in the USA.

JE Pistons’ new Ultra Series pistons are designed specifically for supercharged and turbo-charged applications.

PISTONS

Ultra Series Pistons

In addition, the Ultra Series uses thicker crown and ring lands to support the higher combustion pressures experienced in supercharged and turbocharged applications. Other key technologies include a thermalbarrier ceramic crown coating, Moly-based skirt coating, upgraded wrist pin, and double pin-oiler channels, all of which come together to make the Ultra Series JE’s strongest and most durable powersports piston yet. As always, JE products like the Ultra Series pistons are designed and manufactured in the USA, and come complete with ring pack, wrist pin, and wire locks. ■

» Talk with your Parts rep for details, and get more information in the Street catalog.

NOW AVAILABLE FOR KAWASAKI ZX-14 AND SUZUKI HAYABUSA SPORT BIKE APPLICATIONS

WHAT GIVES ULTRA SERIES PISTONS INDUSTRY-LEADING STRENGTH AND OFF-THE-SHELF CAPABILITY? • • • • • • • ALIGNED GRAIN FLOW TECHNOLOGY!

•

Aligned Grain Flow Technology – proprietary forging process developed in-house increasing strength by approximately 20% compared to standard forging methods Lateral gas ports and accumulator grooves provide consistent ring seal Thermal Barrier ceramic crown coating reduces heat transfer, decreasing material fatigue and improving longevity Tuff Skirt coating is applied in-house and reduces operating friction, improving wear resistance Double pin oilers maintain proper wrist pin and pin bore lubrication to reduce wear, especially under high engine speeds Upgraded 9310 wrist pins come standard to withstand additional loads of high HP engines Supplied as complete kits with pistons, rings, wrist pins, and wire locks under one part number Available in a variety of bore sizes and compression ratios

CONTACT YOUR PARTS REP FOR COMPLETE PRODUCT AND APPLICATION INFORMATION!

@JEPISTONS | JEPISTONS.COM | 714.898.9763

RaceWinningBrands.com

P R O D U C T

S H O W C A S E

FACE MASKS

Breathe Better

Face Masks Designed for Performance

ost racers, riders and enthusiasts typically follow the common practice of gearing-up with protective equipment to protect themselves from the potential harm of crashes or accidents. However, there are unseen health concerns present every time your customers hit the trail. Back in 2010, Steve Torbenson found himself struggling to find a face mask that efficiently filtered harmful particles he encountered daily in his construction work. So, he went to work designing, sourcing and testing materials and, just like that, RZ Mask was born. RZ Mask began and remains a family-operated business by the Torbensons. Being passionate enthusiasts for all things motorsports, they quickly realized the benefits an effective mask would have in off-road powersports applications. RZ Mask’s products are held to a filtration standard of blocking 99.9 percent of particulates, almost 5 percent more than a standard N95, the company reports. RZ Masks utilize replaceable filters specially designed to be capable of blocking particulates down to .1 micron in size. For some perspective on just how small that is, most bacteria and smoke particles only go down to about .3 microns, and a human hair is roughly 100 microns to 150 microns in size, approximately 400-times larger than what RZ Mask filters are capable of blocking. RZ Mask has done its due diligence and sent the company’s product off to be third-party tested by Nelson Labs, an organization dedicated to health-related testing. Since the positive results of those tests, RZ Mask has been endorsed by the Lung Transplant Foundation and Stanford University Medical Center, the company says.

PARTS MAGAZINE

★

SEPTEMBER 2021

RZ Mask’s range of products are designed to filter out harmful particulates, a great solution for off-road riders looking to control dust and other debris.

RZ Masks are available in several different styles and materials, but what’s recommended for mild to hot powersports or work conditions are the M2 and M2.5 mesh masks. These are constructed of lightweight mesh material and feature an adjustable nose clip, adjustable neck strap or elastic straps – depending on the model – and utilize replaceable filters. Additionally, a proprietary V1 exhalation valve provides dual, one-way discharge capability to reduce moisture and prevent fogging. RZ Mask offers three different types of filters for its masks. The F1standard active carbon filter features an initial carbon filtration layer blocking 99.9 percent of particulates, while the second active carbon element helps reduce harmful fumes and odors. The F2 and F3 filters are designed for 40 percent better breathability, utilizing an electrostatic filter layer that also blocks particulates down to .1 micron. The F2 does not feature the active carbon element, while the F3 does. RZ Mask M2 and M2.5 models include the mask itself, two F1 filters and a carrying bag with a carabiner clip. With a combination of durable construction, replaceable filters and a broad application use, RZ Masks can easily become a staple for just about any dealer. They are priced optimally to benefit both the dealer and the consumer, and the replaceable filter aspect is a low-effort driver of repeat business. ■

» Talk with your Parts rep for details, and learn more in the Parts Unlimited catalogs.

PA R T S

D E PA R T M E N T

SENA OUTRUSH R HELMETS Fully integrated with 5.0 Bluetooth® technology Powerful Bluetooth connectivity allows you to safely make phone calls, listen to music and hear turn-by-turn GPS directions Features a four-way intercom connection that works up to 900m (0.6 mile) away Up to 12 hours of talk time Advanced noise control boosts volume in noisy environments Features HD speakers Voice commands allow for hands-free operation Modular design with retractable, UV- and scratch-resistant sun visor Features three-way ventilation, quick-release chin strap padding and multi-density EPS foam for the perfect fit Easy-to-use three-button design makes for an intuitive user interface that is much easier to control while riding for safer operation Connects via Bluetooth or the all new Sena Utility App DOT certified

» » » » » » » » » » » »

SIZE S M L XL 2X

GLOSSY WHITE MATTE BLACK SUG. RETAIL 0100-2171 0100-2176 $259.00 0100-2172 0100-2177 259.00 0100-2173 0100-2178 259.00 0100-2174 0100-2179 259.00 0100-2175 0100-2180 259.00

��

SEPTEMBER 2021

★

PARTS MAGAZINE

PA R T S

D E PA R T M E N T

VANCE & HINES HI-OUTPUT SLIP-ON MUFFLER FOR HONDA MONKEY 19-21 Muffler gives your Monkey a deep, throaty growl and great looks 304 stainless steel construction ¾ system; includes mid-pipe and muffler CNC-machined billet aluminum end cap Laser-engraved logo badge Laser-cut chassis cover All necessary mounting hardware included Made in the U.S.A.

» » » » » » » »

PART # SUG RETAIL

1811-4223 $499.99

UPSWEEP SLIP-ON MUFFLER FOR HONDA GROM 22 Sleek styling and a deep, throaty growl Megaphone muffler with matte black ceramic finish CNC-machined billet aluminum end cap Laser-engraved logo badge Weighs 2 lb. less than stock muffler All necessary installation hardware included Made in the U.S.A.

» » » » » » »

PART # SUG RETAIL

1811-4224 $399.99

HOOLIGAN HI-OUTPUT EXHAUST SYSTEM FOR HONDA GROM 22 Full exhaust system adds a burly sound and levels up the fun on your Grom! 304 stainless steel construction Brushed finish CNC-machined billet aluminum end cap Laser-engraved logo badge All necessary installation hardware included Made in the U.S.A.

» » » » » » »

PART # SUG RETAIL

PARTS MAGAZINE

1810-2909 $479.99

★

SEPTEMBER 2021

MOOSE RACING UNIVERSAL LOCKING LUG NUTS Tapered bushings included to adapt nuts to replace tapered lug nuts when necessary Work for flat and tapered lug nut applications Narrow enough to fit all aftermarket wheels Include eight M10 metal locking flange nuts that won’t vibrate loose Chrome finish Sold in 8-pack

» » » » » »

PART # SUG. RETAIL

0223-0233 $9.95

QUICK-RELEASE FLAG MOUNT Quickly and securely attaches a flag pole to your ATV or UTV Flag pole installation/removal is simple and quick Holder is made from lightweight aluminum All necessary installation hardware included Designed for use with ¼˝ flag poles

» » » » »

PART # SUG. RETAIL

0521-1897 $35.95

MOOSE UTILITY DIVISION SWITCH BLOCK ASSEMBLY FOR POLARIS Features high/low/off light switch, reverse override switch and engine run/kill switch functions Fits multiple Polaris ATV/UTV 02-21 applications; compare OEM switch before ordering

» »

PART # SUG. RETAIL

0616-0390 $54.95

��

SEPTEMBER 2021

★

PARTS MAGAZINE

Make Your Mark.

Elissia A. on an Indian Scout, with a Cafe Fairing, on a ride through Colorado captured by her daughter @whereisavory. MADE IN MEMPHIS | #ShadyMark

the Official Windshield of Progressive AFT

memphisshades.com