Page 46
Supply Post · supplypost.com
Small But Mighty FRONT PAGE STORY: Conwest Contracting’s Equipment Manager Steve Claydon shares the advantages of the Wacker Neuson ET145 excavator and the full line of Wacker Neuson wheel dumpers on their projects in and around Vancouver, BC.
W
hen Steve Claydon, equipment manager for Conwest Contracting in Vancouver, BC was presented with a challenging jobsite, he knew they would need particular equipment for the job. A Tight Squeeze “We’re installing a new energy line system for the heating of all the buildings here at SFU,” he explained. “We’re working in an area where we still have
the existing line in place, and we’re installing a new line next to it on a separate trench line. After that line’s installed, then we’ll go back and install the services.” There were two parts to the terrain; extremely hard ground, with multiple services on top of each other, creating a lot of conflict on certain sanitary lines, storm lines, and other services.
Excellent Excavator “On this job, we carry our Wacker ET145 for the really intricate parts of the job such as hard-to-getin areas,” Claydon said. “We were able to put the machine in tight quarters, flip the bucket around, use it as a shovel, use it as a regular excavator. With the articulating boom, we can really shove that machine into tight quarters, and still pull the material
out,” he continued. “The thing that caught our eye most about this machine, was the size of the excavator, with the option of the articulating boom and the overall balance of the machine,” Claydon explained. “If I put an operator on the ET145 for a week’s period of time, at the end of that week he really likes the machine for its capabilities,” he said.
February 2019 A Unique Set of Dumpers “Currently we’re sitting at eight dumpers, ranging from 3001, all the way up to a DW90,” Claydon said. “These dumpers are unique — we use them in all aspects of our jobs. We’ll actually bring the 3001 right inside buildings, putting scrubbers on it to reduce the emissions. We were able to get material in and out of some of our large commercial buildings during seismic upgrades and service upgrades,” he continued. Conwest also uses the 3001 to service trenches and remove material. Conwest uses the larger dumpers for bulk excavations. “We’ll actually drop them right inside the hole,” Claydon explained. “We use them for our mechanical detail excavation, to move material from one side of the job to the next,” he said. “The DW90 helps us in a few of ways,” Claydon continued. “We don’t have to drop in a rock truck. When we’re cramped for size, we don’t have to utilize an on-site
dump truck,” he said. “It also helps us with labour,” Claydon explained. “We can double-end our operators on our Wacker buggies; by moving equipment around, we can utilize operators a little bit more,” he finished. “The larger dumper aids trench backfill,” Claydon said. “We can move material in tight spaces and generate our own ramps — if you dump enough material correctly with the dumpers, you can basically build your own road to get yourself in and out,” he explained. “They save us time, time equals money,” Claydon continued. “The crews fight over them — originally everybody fought over the 3001, and now as we’re getting bigger, everybody just fights over the bigger machines,” he laughed. “They’re a very crucial part of our day-to-day operations,” he concluded. Conwest purchased their Wacker Neuson products from CC Equipment, Surrey, BC. b Source: Wacker Neuson
WACKER NEUSON
Conwest uses eight dumpers, ranging from 3001, all the way up to a DW90.
EQUIPMENT DETAILS Wacker Neuson ET145 Tracked Excavator Operating Weight: 34,284 - 36,012 lb Digging Depth Max.: 215.8 in L x W x H: 306.6 x 98 x 109.7 in Engine Performance: 73.9 hp Dump Height Max.: 0 in
FRANK R. DATZER/DCP VIDEO
Wacker Neuson 3001 Wheeled Dumper Payload: 6,614 lb Shipping Weight: 5,622 lb Engine Performance: 36.2 hp Travel Speed: 13.7 mph L x W x H: 166.9 x 70.3 x 105.1
The thing that caught Conwest’s eye most about the ET145 was the size of the excavator, with the option of the articulating boom and the overall balance of the machine.
Wacker Neuson DW90 Wheeled Dumper Payload: 19,842 lb Shipping Weight: 12,486 lb Engine Performance: 73.8 hp Travel Speed: 15.5 mph L x W x H: 204 x 97 x 100 Source: WackerNeuson.com
