22 Compliance
Testing the water with WRAS-approved adhesives Jon Whitehouse, Director, Industrial MRO and Safety at ERIKS, looks at the regulations surrounding the use of threadlockers and sealants on products and systems used in the supply or storage of water for domestic purposes.
S
trict rules and regulations surround the use of adhesives such as threadlockers and sealants for products that are likely to convey or regulate public drinking water. Failure to check that an adhesive complies with the necessary standards can lead to disastrous consequences. Health, costs, and brand reputation are on the line. So, our advice is to check carefully before making a purchase. The Water Regulations Advisory Scheme (WRAS) is a conformance mark that demonstrates that an item complies with the high standards outlined by UK water regulations. In short, no material or substance that causes, or is likely to cause, water contamination shall be used in the construction, installation, renewal, repair or replacement of any water fitting that conveys or receives water supplied for domestic purposes. To make it clear, that includes drinking, bathing, washing or cooking. Only materials which have satisfied the requirements of BS 692:2000 Parts 1 and 2 shall receive WRAS Material Approval, with anything from pipes, fittings, valves, pumps, taps, showers, washing machines and dishwasher, to coffee machines, boilers and toilets needing to comply. THE CHALLENGE Non-metallic materials, such as threadlocking adhesives and sealants, are today commonplace in various products and assemblies for domestic water supplies. However, some non-metallic materials can affect the odour, flavour or colour of water, with further potential issues such as the release of soluble organic chemicals or the promotion of micro-organisms a cause for concern. BS 6920:2000 – ‘Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water’ – outlines the test methods and criteria observed by WRAS when assessing non-metallic materials. The tests in BS 6920 reproduce the typical conditions that a material might meet during its service life in contact with wholesome water. Receiving WRAS approval declares that the product is of suitable quality and standard to avoid water contamination and minimise waste, but only if applied correctly. TESTING, TESTING, TESTING So, now we’re guessing you want to know what the tests involve? Well, odour and flavour testing are fairly
Quarter 3 2021
self-explanatory. A panel of experts assess the taste and smell against a control of tap water. Colour is examined using a colour spectrum, while turbidity (a measure of the degree to which the water loses its transparency) is tested using a turbidimeter, with predetermined pass/fail criteria applying to both instances. Microbial testing reveals if a product will promote any significant growth of aerobic micro-organisms. MDOD (mean dissolved oxygen difference) then determines the pass or fail criteria over the duration of the test, which typically takes 7-10 weeks. The removal of oxygen from the test system occurs as aerobic organisms increase, with comparisons drawn between this loss and the control system. MDOD is the mean value from samples taken at different stages of the testing process, with final evaluation concluding in a pass or fail. Cytotoxicity testing is also required, with a typical duration of seven days. Throughout this period, the analysis team will look for a cytotoxic response or, in other words, determine whether a product shows any toxicity levels to humans.
“Receiving WRAS approval declares that the product is of suitable quality and standard to avoid water contamination.”
www.theaemt.com
