PROCESS FUSING YOUR TAILORED JACKET
1
2
3
4
PATTERNCUTTING A FUSING PATTERN (Back):
CONSIDERATIONS WHEN FUSING YOUR GARMENT
1. Draw a scalloped line approx 12cm down from the CB and SB seams. Draw around the section of the back which will become the fusible pattern.
Cut all hem fusible on the bias. The interfacing should be placed 1cm above the finished length. This ensures a clean crisp and flexible hem finish.
2. Trace the scalloped line onto the fusing pattern.
Use the fusing press to apply fusible at all times. There are no exceptions. The iron has insufficient heat and pressure to fuse things adequately.
3. Reduce fusing pattern by 3mm around outside edges. This reduces bulk in the seam allowance and prevents fusing sticking to anything but the garment. Label the pattern then cut out. 4. Cut the rest of your fusing pattern following the diagram. The front facing uses two types of fusible which are overlapped by 1cm at the breakline. KEY: 1 - Supersoft fusible (straw coloured, firmer feel) 2 - Muslin fusible (cream with soft fluffy feel) 3 - Ultrafine fusible (thin and transparent) Š Karen Ferry and Rosemary White
The above diagram demonstrates the interfacing placement for half a jacket. For a full jacket, repeat to the other side. NB. These instructions are specific to the Tailoring workshop. Where you fuse and what fusible you use will depend on your garment style and fabric choice. If you have any questions regarding a particular style or fabric, please see a member of staff to discuss your individual needs.