PROCESS LOADING A BOBBIN INTO A BOBBIN CASE
1
4
2
5
3
6
1. Assemble all equipment needed for this process. 2. Place the bobbin into the bobbin case, leaving about 10cm of the thread outside the case. 3. Pass the thread along the slit of the case. Continue along the slit to the tension spring, then around the hook.
Š Karen Ferry and Rosemary White
4. Your bobbin is now ready to load into the sewing machine. 5. Slide the needle plate to the left to gain access to the bobbin shaft. 6. Check the bobbin is going in a clockwise direction.
PROCESS LOADING A BOBBIN INTO A BOBBIN CASE
7
10
8
11
9
12
7. Insert the bobbin case into the shuttle under the table, click into position. 8. Hold the top thread in one hand while turning the machine wheel towards you with the other. Lower the needle down into the rotary hook. 9. Gently pull the bobbin thread up through the needle plate.
Š Karen Ferry and Rosemary White
10. Place both threads under the machine foot. 11. Lower the machine foot gently, slide the plate closed. You are ready to sew. 12. Loaded bobbin.