SWAT™ Information Booklet - JTN Technical Services

SWAT

Safe Working at All Times

JTN is here to assure a person’s competency

Good Safety at the work site does not come from sitting in a classroom.

Good Safety comes from the skills and attitude exhibited in the period after the knowledge is gained in the classroom.

SWAT™ Passport

Candidates who successfully complete SWAT™ will receive a passport and a certificate* as proof of their competence. *Will only be issued when all five modules have been successfully completed.

6

WHY A SWAT™ PASSPORT? The passport records a workers’ competence in the five main HSE topics which are critical to ensure a safe place of work. These topics are modular and are completed after a delegate has attended the company’s HSE induction.

• • • • •

Module 1 — Identifying Hazards at the Worksite Module 2 — Conducting a Risk Assessment Module 3 — Being aware of the essential requirements of a PTW system Module 4 — Being aware of the need for positive isolation of energy sources Module 5 — Using all the above information develop and deliver an effective toolbox talk

HOW DOES A SWAT™ PASSPORT WORK? All delegates will be issued a personal SWAT™ Passport following their attending a company HSE induction or when attending their first SWAT™ module.

On successfully completing a module, each delegate will have that module signed off by the relevant certified JTN instructor/ assessor.

On successfully completing all five modules, each delegate will be issued with certificate of competence.

HEALTH, SAFETY & ENVIRONMENTAL POLICY •

The company which has employed you is committed to protecting the Health and Safety of all personnel working or visiting their sites.

•

They will plan, manage, conduct and supervise all work in compliance with a legislation and best practice.

•

They will ensure that all workers have a clear understanding of their responsibilities along with that of the company.

CONFIRMING COMPETENCE The passport is ideal for confirming a worker’s current HSE competence.

The SWAT™ Passport demonstrates that the candidates’ basic training is up to date.

Security features include a photo, hologram, signature and JTN company stamp, meaning the passport is more tamper and fraud-proof than a certificate.

7

Our SWAT™ approach combines Underpinning Knowledge and Practical Assessments for crucial areas of your business.

8

SAFE WORKING AT ALL TIMES (SWAT) MODULE LISTING

MODULE 1

HAZARD IDENTIFICATION AND IMPLEMENTING CONTROLS AT THE WORKSITE PAGE 13 MODULE 2

RISK ASSESSMENT PAGE 15 MODULE 3

PERMIT TO WORK AWARENESS PAGE 17 MODULE 4

LOCK OUT, TAG OUT AND TEST PAGE 19 MODULE 5

TOOL BOX TALK (DEVELOPING AND DELIVERY) PAGE 21

9

10

Safety Tool Box 11

HAZARD IDENTIFICATION AND IMPLEMENTING CONTROLS AT THE WORKSITE

12

MODULE 1

Hazard Identification and Implementing Controls at the Worksite The aims and objectives of this course is to ensure a safe place of work through the correct identification and management of hazards at the worksite.

COURSE OUTCOMES

LOCATION

Participants will have gained the basic knowledge and skills to identify, analyse and apply control strategies to eliminate or reduce hazardous conditions and unsafe practices in the workplace.

Training can be conducted at the attendee’s normal place of work, or, an alternative suitable training/ assessment location.

DURATION

1 day.

WHO SHOULD ATTEND?

Those supervising work sites, working at work sites, visiting work sites, including managers with responsibility for work sites.

ASSESSMENT

An underpinning knowledge of assessment will be conducted on completion of instruction.

PRE-REQUISITES

None.

VALIDITY

Three years validity requiring a ½ day refresher course to renew validity.

PARTICIPANTS

Minimum of 5, Maximum of 20.

USD

165

PER PERSON

13

RISK ASSESSMENT

14

MODULE 2

Risk Assessment The aims and objectives of this course is to ensure a safe place of work through the correct identification of risk. It also ensures persons are competent to manage risk through the correct application of Risk Assessment.

COURSE OUTCOMES

LOCATION

Participants will have gained an understanding of key practical risk assessment techniques allowing them to implement monitoring and review of the risk assessment process.

Training can be conducted at the attendee’s normal place of work, or, an alternative suitable training/ assessment location.

DURATION

WHO SHOULD ATTEND?

Those supervising work sites, working at work sites, visiting work sites, including managers with responsibility for work sites.

PRE-REQUISITES

1 day.

ASSESSMENT

An underpinning knowledge of assessment will be conducted on completion of instruction.

None.

VALIDITY

Three years validity requiring a ½ day refresher course to renew validity.

PARTICIPANTS

Minimum of 5, Maximum of 20.

USD

165

PER PERSON

15

PERMIT TO WORK AWARENESS

16

MODULE 3

Permit to Work Awareness The aims and objectives of this course is to ensure a safe place of work through being aware of the essential requirements of a permit to work system. It also ensures persons are competent to work under the requirements of a PTW system.

The training can be generic or customised to reflect an organisations specific operational procedures.

COURSE OUTCOMES

LOCATION

Participants will have gained an understanding of the benefits of PTW, the essential features of the system, the mechanics of implementing the system and monitoring its effectiveness.

Training can be conducted at the attendee’s normal place of work, or, an alternative suitable training/ assessment location.

DURATION

1 day.

WHO SHOULD ATTEND?

Those supervising work sites, working at work sites, visiting work sites, including managers with responsibility for work sites.

ASSESSMENT

An underpinning knowledge of assessment will be conducted on completion of instruction.

PRE-REQUISITES

None.

VALIDITY

Three years validity requiring a ½ day refresher course to renew validity.

PARTICIPANTS USD

165

Minimum of 5, Maximum of 20.

PER PERSON

17

LOCK OUT, TAG OUT AND TEST

18

MODULE 4

Lock Out, Tag Out and Test The aims and objectives of this course is to ensure a safe place of work through the effective isolation of energy sources.

It also ensures persons are competent to plan, prepare and monitor effective isolation of energy sources when work is required to be conducted on systems with a potential for the release of energy in an uncontrolled manner.

COURSE OUTCOMES

LOCATION

Participants will have gained an understanding of the need to have a means of positive control to prevent the accidental starting or activating of machinery or systems while they are being repaired, cleaned and/or serviced.

Training can be conducted at the attendee’s normal place of work, or, an alternative suitable training/ assessment location.

WHO SHOULD ATTEND?

Those supervising work sites, working at work sites, visiting work sites, including managers with responsibility for work sites.

DURATION

1 day.

ASSESSMENT

An underpinning knowledge of assessment will be conducted on completion of instruction.

PRE-REQUISITES

VALIDITY

None.

Three years validity requiring a ½ day refresher course to renew validity.

PARTICIPANTS

Minimum of 5, Maximum of 20.

USD

165

PER PERSON

19

TOOL BOX TALK (DEVELOPING AND DELIVERY)

20

MODULE 5

Tool Box Talk (Developing and Delivery) The aims and objectives of this course is to ensure a safe place of work through the effective delivery of Tool Box Talks. It also ensures persons are competent to develop and deliver Tool Box Talks at the work site.

COURSE OUTCOMES

LOCATION

Participants will have gained the knowledge and understanding of how to develop and deliver tool box talks in an efficient manner so that personnel attending enjoy the experience.

Training can be conducted at the attendee’s normal place of work, or, an alternative suitable training/ assessment location.

DURATION

1 day.

WHO SHOULD ATTEND?

Those supervising work sites, working at work sites, visiting work sites, including managers with responsibility for work sites.

PRE-REQUISITES

Must have successfully attended Modules 1 - 4.

PRACTICAL ASSESSMENT

Using data collected from Modules 1 - 4, delegates will develop a Tool Box Talk and then deliver it to the instructor/ assessor.

VALIDITY

Three years validity requiring a ½ day refresher course to renew validity.

PARTICIPANTS

Minimum of 5, Maximum of 20.

USD

165

PER PERSON

21

Don’t have the tools?

Let the JTN SWAT TEAM help with that too.

If you are interested in taking this qualification, please call a member of our staff on +60 85 420 040 to discuss the programme in more detail such as assessment criteria, timelines, payment structure etc.

Alternatively, contact us online by visiting jtntechnicalservices.com/contact or email contact@jtntechnicalservices.com and one of our advisors will get back to you by phone or email.

Online version of this overview at swat.jtn.me