Improving the long-term performance of the building envelope By Fred Edwards, P. Eng., LEED AP BD+C
Effective building envelopes, like all aspects of a building, are required to incorporate components and designs which address the forces of nature to which they will be subjected. The physical laws governing thermal performance and the movement of air and moisture over and through materials are complex and not always completely understood. The long-term performance of an envelope is dictated during three distinct phases of a building’s life cycle. The phases, and some of the critical elements that must be considered at each, may be summarized as follows: • Design: Design professionals should know and understand the importance, function, and science of the envelope as well as being familiar the local climate. A façade that works in Arizona will fail in Alberta, and vice versa. Building envelope practitioners who specialize in the building envelope are available and willing to assist with complex and challenging situations. • Construction: Qualified contractors should understand the importance of the envelope and have a high level of attention to detail. Envelope failures tend not to happen in the middle of a wall or roof, but often occur at the interface between elements (windows, slabs, doors, etc.). A high level of construction review by the design team is key at interfaces.
• Maintenance: Envelope systems vary from high to low maintenance assemblies; this is roughly inversely related to the initial investment in the envelope (a low-cost envelope system generally requires a high level of maintenance, whereas a high-performance/cost envelope will generally require a low level of maintenance). In both cases, on-going assessment and the creation of a building envelope maintenance plan will help maximize the longevity of envelope systems. When dealing with an existing facility, it is usually not be possible to impact the design or construction phases. Thus, assessing and maintaining the envelope becomes key to its durability and longevity. Identification of failures, or the potential for a failure to develop, can be difficult and may require a trained eye. But, the first step is almost always visual. Envelope problems will often first show up as a small crack, discolouration, bubbling paint, or damp carpet/wallboard (see Image 1). The more closely and regularly an envelope is scrutinized, the better the chance is that failures can be identified and repaired quickly and cheaply. A comprehensive visual review will usually focus on the transition details (windows, doors, roofs, conduit, etc.) as these are most commonly points of failure. Often, failures in an envelope occur below the skin. Moisture barriers and critical seals can located within the wall assembly
Image 1 - Visual evidence can often trigger a more in-depth investigation.
58
Ops Talk • Spring 2013
