Water Sampling Vol. 5

The Environmental Choice

BioBailers™ are standard disposable bailers used for groundwater bore sampling, but with the added benefit of being biodegradable when discarded into a landfill.

Features

• Made of clear PVC

• PVC has higher specific density of 1.3 allowing these bailers to sink faster than HDPE bailers

• An engineered additive Ecopure™ to make them biodegradable

• BioBailersTM will not leach

Disposable Clear PVC Clear-View™ Bailers

Clear-View™ bailers are ERE’s best-selling bailers. They allow for immediate visual examination of your sample.

Features

• Made of 100% virgin, medical grade, clear rigid PVC

• Fastest sinking bailer

• PVC is very ridged, stays straight, never bending or distorting under normal care

• Tested and approved by independent lab for leaching, absorption and overall performance (tested under Methods 8260 & 8260B)

Disposable Polyethylene Bailers

Polyethylene bailers are chemically inert and have a natural color.

Features

• Made of virgin HDPE

• Individually

and pre-cleaned

Disposable Teflon® Bailers

With the disposable Teflon® Bailer, you can eliminate cross contamination and decontamination time while meeting the requirements of quality assurance programs that limit sampling devices to Teflon®

Features

• Made from 100% Teflon®

• Special dome design top and bottom to avoid hang-ups from shifted well casing

• Non-reactive components

• Each unit individually decontaminated with Liquinox™ washing and DI water rinse

• Individually sealed packaging

Part

VO-SST-36-021 PTFE Non-Weighted

VO-SST-36-021-W PTFE Weighted

LNAPL Sampling Made Easy

Disposable Clear-View™ Hydro-Bailers

Hydro-Bailers are designed for the collection of hydrocarbon liquids of LNAPL (light non-aqueous phase liquids). When lowered into the product layer and retrieved the ball valve allows water to escape, but leaves free product in the bailer.

Features

• Made of clear PVC

• Ideal for free product only samples

• Visual identification of the product thickness

Wash And Re-Use, Less Waste!

ERE's Reusable CarboBailer™

The CarboBailer™ is an economical way of collecting and/or sampling hydrocarbons from wells, drums, or tanks. It works by just slowly inserting the bailer into the well and just slowly removing it. As it will be raised from the well, the water will drain out of the bailer while the hydrocarbons will be trapped. The hydrocarbons can be removed by either pouring out from the top or using a bottom-emptying device.

Features

• Made of clear PVC

The Environmentally Friendly Solution Reusable PVC Bailers

If a disposable bailer isn't the right answer for you, explore the option of purchasing a permanent, reusable clear PVC bailer. Simply unscrew the bottom check valve and then each part (bailer, bottom & ball) can be decontaminated and rinsed for reuse.

Features

• Made of clear PVC

• Easily disassembles to decontaminate

*Other sizes available upon request

Reusable Stainless Steel Bailers

Stainless Steel bailers are suitable for sampling virtually any potential contaminants while maintaining sample integrity. Threaded bottom check valve allows for easy disassembly and cleaning.

Features

• Made of 304 Stainless Steel

• Use Stainless Steel when plastic bailers are not suitable

• Easily disassembles to decontaminate

*Other sizes available upon request

Lost Your Bailer? Use The Bailer Retriever To Find It!

Bailer Suspension Nylon Rope

Nylon braided, heavy-duty rope, durable and does not unravel. A resistance of 110 lbs.

Bailer Retriever

The bailer retriever has been engineered to retrieve bailers which have become separated from their retrieval line. The product is 5 1/2" long, manufactured from stainless steel, incorporates 4 hooks, and has been designed to work in wells of 2" diameter and bigger.

How To Know Which HydraSleeve Is Right For You?

1. Choose a 2" or 4" Hydrasleeve based on well size

2. Choose an armoured (tougher) or standard HydraSleeve

3. Choose the volume of sample you would like

HydraSleeves

The HydraSleeve No-Purge Groundwater Sampler is a new way to collect discrete interval water samples. With no need to purge or dispose of purge water, this groundwater sampler reduces your costs by saving time.

Features

• Long or short term groundwater monitoring

• Samples low-yield wells

• Determines dissolved contaminant fraction

• Samples crooked or constricted wells

• Vertically defines contaminant concentrations or composites sampler from 10 ft screen interval

Standard HydraSleeves For 2" Wells

WA-GSH-155-ARM Armoured

WA-GSH-150-ARM Armoured

WA-GSH-300

WA-GSW-TW-11OZ

WA-GSH-299

WA-GSW-304-C

WA-GSW-305-C

WA-GSW-316-C

WA-GSW-317-C

Standard HydraSleeve For 4" Wells

WA-GSH-299

WA-GSW-316-C

SuperSleeves

WA-GSH-430 SuperSleeve

WA-GSH-440 SuperSleeve

WA-GSH-470 HDPE

WA-GSH-360 SuperSleeve Collar & 35 oz Top Weight -

WA-GSH-323 2-Piece PVC Collar For SuperSleeves 1.65" - Each

WA-GSH-325 2-Piece PVC Collar For SuperSleeves 1.9" - Each

WA-GSH-299 Bottom Spring Clip - - Each

WA-GSW-304-C Bottom Weight With Clip

WA-GSW-305-C Bottom Weight With Clip

& LIQUID SAMPLING

FUN FACTS

• HydraSleeves require weights (top & bottom) to deploy properly.

• Plan ahead - HydraSleeves require equilibration time.

• Sampson™ groundwater filters can be used with HydaSleeves.

Sampson™ & Waterra Groundwater Inline Filters

These filters are designed to remove the suspended particulate from groundwater samples so the dissolved metal content can be determined. Simply plug a filter into your pump tubing or bailer. Run the water through the inline disposable filter and capture the flow in a sample vial.

Features

• Filter media is polyethersulfone, body is polyethylene and media support is polypropylene

• Excellent particle retention above the target micron size range

• Maximum utility gained from the media, even with the most turbid samples

• Built in compound 3/8" threaded nipple and 1/2" barbed inlet

• PFAS, PFOS & PFOA free

• ISO 9001:2015 compliant

SPSSM-0.45

WA-CAP300X-0.1 Waterra 300 cm2

WA- CAP300X-0.22

WA- CAP600X-0.22

WA- CAP300X-1.2

WA-CAP600X-5

How To Filter Groundwater For Metal Analysis Using A 0.45 µm Filter.

• Complete the pre-sampling protocol (eg. purging 3 well volumes or low flow sampling or specified protocol)

• Insert a Sampson™ or Waterra 0.45 µm filter into the well tubing

• Continue pumping

• Direct the flow from the discharge outlet of the filter into your sampling vessel

• Use a new filter for each sample

Excellent For Developing, Surging & Cleaning Out Groundwater Monitoring Wells Surge Blocks

Designed to work with the Waterra pump system, surge blocks are tough thermoplastic donuts that press fit onto either a standard flow system

footvalve to accommodate 2" wells or a high flow system WA-D-32 footvalve to accommodate 4" wells. The surge block is designed to free up silt and sediment in the sand pack and screen, and breaks down bridging, drawing these particles into the well and then removes this material from the well.

Features

• Effectively increases the outside diameter of the WA-D-25 footvalve to 1 7/8" in 2" wells & the WA-D-32 footvalve to 3 7/8" in 4" wells

• Reduces the annular gap between the valve and the inside of the well screen to approx. 1/16"

• Significant increase in the surging action of the footvalve - surge block combo

Best Seller For Purging & Sampling Groundwater From A Well!

Waterra Inertial Pumps - Best Known As A "Footvalve"

System

Applications

• Micro wells

• Sampling damaged wells

• Custom installations

• For use with direct push technology

• Hand operation

Flow System

Applications

• Sampling piezometers

• Sampling damaged wells

• Custom installations

• Hand operation

Flow System

Applications

• Most popular system

• Best cost/performance ratio

• Hand operation or automatic operation

Flow System

Applications

• Deep well sampling

• Large diameter wells

• Well development

• High flow rates

• Sediment laden wells

Features

• Ensures that valves are securely attached to the tubing

• Eliminates lost valves down the well

High & Low Density Polyethylene Tubing – Best Known As HDPE & LDPE Tubing

Tubing Cutter

Features

• Faster & safer than a utility knife

• Rotating/rocking motion produces straight, clean cuts

Part Number Description

WA-WTC Tube Cutter

Connectors-Barbed

Features

• Inexpensive accessory to connect one tube to another

• Available in Black HDPE or Nylon 6

• Available in different sizes

Temperature Ratings

• HDPE: -55°C to 90°C

• Nylon: -40°C to 100°C

Features

• Produced from virgin polyethylene resins

• Does not contain any regrind product

• Does not contain any UV stabilizers

• Individually poly bagged and are stored in sealed boxes, protected from UV light sources

Part Number

WA-1/4-LDPE-100

WA-1/4-HDPE-100 HDPE 1/4'' O.D. x 0.17'' I.D. 100 ft/Roll

WA-3/8-LDPE-100 LDPE 3/8'' O.D. x 1/4'' I.D. 100 ft/Roll

WA-3/8-HDPE-100 HDPE 3/8'' O.D. x 1/4'' I.D. 100 ft/Roll

WA-1/2-LDPE-100 LDPE 1/2'' O.D. x 3/8'' I.D. 100 ft/Roll

WA-1/2-HDPE-100 HDPE 1/2'' O.D. x 3/8'' I.D. 100 ft/Roll

WA-5/8-LDPE-100 LDPE 5/8'' O.D. x 1/2'' I.D. 100 ft/Roll

WA-5/8-HDPE-100 HDPE 5/8'' O.D. x 1/2'' I.D. 100 ft/Roll

WA-1-HDPE-100 HDPE 1.0'' O.D. x 0.814'' I.D. 100 ft/Roll

*200 ft & 500 ft rolls of tubing also available

Reducing Connectors

Features

• Connecting on a smaller diameter in an inexpensive way

• Available in Black HDPE or Nylon 6

• Available in different sizes

CO-C22

1/8" I.D. 1/8" I.D. 10/Pack CO-C33

3/16" I.D. 3/16" I.D. 10/Pack

CO-C44 CO-C44PE 1/4" I.D. 1/4" I.D. 10/Pack CO-C55

5/16" I.D. 5/16" I.D. 10/Pack CO-C66

3/8" I.D. 3/8" I.D. 10/Pack CO-C88 CO-C88PE 1/2" I.D. 1/2" I.D. 10/Pack

CO-C1010 CO-C1010PE 5/8" I.D. 5/8" I.D. 10/Pack CO-C1212 CO-C1212PE 3/4" I.D. 3/4" I.D. 10/Pack CO-C1616

1" I.D.

Inexpensive Solution!

Lever Arm Manual Tubing Actuator

Designed to provide operators with a convenient, portable mechanism which would provide some mechanical advantage when manually operating the Waterra Pump as well as facilitating the collection of samples with this system. An above ground well completion is required in order to use this Lever Arm Manual Tubing Actuator.

Features

• One handed operation making sample collection easier because it supports the discharge end of the pump’s tubing

• Suitable for use with Low, Standard and High Flow Waterra Pumping Systems

• Fully adjustable and adapts to almost any size casing or protective well casing

• Hinged tubing clamp which helps prevent pump tubing from abrading against well casing

• Reduces fatigue that one may experience when required to purge large volumes from wells

AVAILABLE TO RENT *Tubing & footvalves sold separately

Best Seller! High Performance Automation

Drive Mechanism Hydrolift-2 Tubing Actuator

The Hydrolift is a portable, electrically operated device that is used to automate the operation of the Waterra Pump System. Great for use when developing monitoring wells. It is designed to be used in moderate to extreme pumping requirements (Low, Standard and High Flow).

Features

• Ideal for purging and sampling 2" diameter monitoring wells up to 200 ft (60 m) deep

• Optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 150 ft (45 m)

• Suitable for use with Low, Standard and High Flow Waterra Pumping Systems

• Supports the Waterra tubing and also anchors the discharge end of the tubing facilitating sample collection

• Fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions

• Hinged tubing clamp

• Reduces fatigue that one may experience when required to purge large volumes from wells

Portable, Single Operator Power Unit

The PowerPack PP1 is powerful enough to lift water from over 60m depth using the Standard Flow System, and it fits onto a back-pack frame. The pump incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes). Excellent choice for those with moderate pumping requirements.

Features

• Suitable for use with Low, Standard and High Flow Waterra Pumping Systems

• Ideal for purging and sampling 2" diameter monitoring wells up to 200 ft (60 m) deep

• Supports the Waterra pump system tubing and also anchors the discharge end of the tubing facilitating sample collection

• Fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions

• Powered by the Honda GX25 a 25 cc Mini 4-Stroke OHC gasoline engine

• Lightweight motor is EPA/CARB compliant, runs on regular gas and has a quiet – pleasing "low" tone

• Can run for approximately 1 hr on one full fuel tank

• Reduces fatigue that one may experience when required to purge large volumes from wells

• Includes backpack and spark arrestor

Ezyflow™ Water Sampling Pump

Features

• Small compact design

• Robust and easy to carry case

• Illuminated "ON/OFF" indicator

• Speed control from low to high speeds

• Reversible flow and prime/purge function

• Suitable for various liquids

• Samples from depths of up to 26 ft (7.9 m)

• Supporting various tube material for transferring different liquids

AVAILABLE TO RENT

• IP54-rated control panel protects against inclement weather and splashing water

• Easy top plate charging station

• Rechargeable battery — ideal for field applications

• Supplied with Ezyflow™ easy to load pump head and AC adapter

with easy to load system

Flow Range 0 - 1740 ml/min

Max. Lift 26 ft (7.9 m)

Max. Speed 600 RPM

Variable Speed Manual control knob

Pump Head Quick connect EzyflowTM Motor 12V DC

Power 115/230V AC

Tubing Sizes 15 & 24

Drive IP Rating / Weather Proof IP54

Dimensions 17.5" L x 8" W x 8.5" H

Accessories

Tubing

EZ-15

EZ-24

Tube Material Silicone Silicone

Tubing Size 3/8'' O.D. x 3/16'' I.D. 0.44'' O.D. x 1/4'' I.D

Spectra FieldPro Peristaltic Pump

Features

• Heavy duty construction

• Advanced electronic flow controller - maintains a steady flow rate regardless of battery voltage; will not cut out during low flow sampling

• Built-in storage compartment - for charging cables, field book, tools, well key, etc.

• Built-in VOA stand - allows easily sampling without spillage

• Battery included - will run all day at full strength; outlasts competition

• Supplied with battery and all cables to enable use of alternate (115V AC) power source AVAILABLE TO RENT

Model

Flow Range 50 - 1900 ml/min

Max. Lift 27 ft (8.2 m)

Battery Life At Low Flow 14 hrs

Battery Life At High Flow 9 hrs

Motor 12V

Tubing Sizes Masterflex sizes 15 through 36 Dimensions

WA-SPE-CTRAFIELD Spectra FieldPro Peristaltic Pump Each

Accessories

Tubing WA-L/S-15 WA-L/S-24

Hose Material Thermoplastic Elastomer Masterflex® Thermoplastic Elastomer Masterflex®

Tubing Size 0.19" I.D. 0.25'' I.D

Max. Flow Range 0 - 1100 ml/min 0-1800 ml/min

Solinst Model 410 Mk4 Peristaltic Pump

Features

• Low flow rate is ideal for low-flow sampling and the filling of small sample bottles

• Compact and lightweight

• Metal case is extremely robust and water resistant

• Supplied with 5/8" O.D. x 3 ft silicone tubing (adapter assembly extra)

WA-L/S-15 0.19'' I.D. Thermoplastic Elastomer Masterflex® Tubing

WA-L/S-24 0.25'' I.D. Thermoplastic Elastomer Masterflex® Tubing

WA-1/4-LDPE-100 1/4'' O.D. x 0.17'' I.D. LDPE Tubing

ft/Roll

WA-1/4-HDPE-100 1/4'' O.D. x 0.17'' I.D. HDPE Tubing 100 ft/Roll

*Other LDPE & HDPE tubing sizes & lengths also available

Model 410 Mk4

Type Peristaltic

Flow Range 5/8" O.D. tubing delivers 3.2 L/min. 3/8" O.D. tubing adaptor kit delivers 40 ml/min

Sampling Depth As much as 33 ft (10 m) at sea level

Power Source 12V DC

Power Draw 3 – 5 A max.

Optional 12V Battery Holder

Max. Battery Dimensions 5.9" L x 3.8" W x 3.6" H

Dimensions 13" L x 5" W x 6-1/2" H

Weight 7.2 lbs

SO-112981 410 Mk4 Peristaltic Pump Each

Accessories

SO-114602 410 Pump Add-On Battery Holder Each SO-113913 410 Mk4 3/8" O.D. Tubing Adaptor Assembly Each SO-114179 410 Mk4 3/8" Tubing Adaptor 2/Pack

SO-113947 410 Mk4 3/8" Tubing Adaptor Liners, 10/Pack SO-113949 410 Mk4 Replacement Pump Head Assembly Each SO-105137 5/8" O.D. Silicone Tubing, Sold/ft

SO-105136 3/8" O.D. Silicone Tubing, Sold/ft SO-106253 Mini Carry Case Each

& LIQUID SAMPLING

WS Series Water Samplers Easy Automatic Sample Collection On Site Or

When You Are Away

WS700, WS700R, WS705, WS750, WS755

The WS700 single bottle and WS750 Dual bottle samplers combine all the features you need to meet a wide variety of sampling requirements, including those for stormwater, rivers and streams, industrial discharge, water and waste water treatment and waste water collection.

The WS705 and WS755 models provide the exact same functionality as their counterparts, but are equipped with enhanced portability accessories, such as more ergonomic handles and durable wheels.

If your samples need to be refrigerated the WS700R model is ideal for providing the same sampling functions and needs, but with the added benefit of keeping your sample refrigerated.

The WS700R Refrigerated Wastewater Sampler gives you complete control over your water sampling process. With the water sample size control, you can take individual timeweighted samples or full bottle discrete samples in a 2 gallon sample bottle.

The water sample interval control allows you to set the time between individual refrigerated composite samples, or enable the external trigger mode for flow proportional sampling.

Features

• Sample size control allows you to take time-weighted composite samples from 50 ml to 2 L

• Trigger inputs to control sample collection

• Does composite or discrete sampling or both at the same time (WS750 & WS755)

• Cooling unit can be plugged into a battery unit or external source

• Automatic backflush clears pickup strainer and hose

Includes

• WS700, WS700-IBO, WS700R, WS705, WS750 or WS755 water sampler

• 15 ft of sampling hose

• Intake strainer for each pump

• 1 gallon polybottle for each pump (WS750 & WS755)

• 2.5 gallon polybottle for each pump (WS700 & WS705)

• 2 gallon polybottle (WS700R)

• Rechargeable battery

• Portable charger

Composite/Discrete Samplers

Range of Features & Options

The WS series of samplers has the functionality to add additional data logger options, sensors, and pumps for more ease of use for example:

• Water Sampler Data Logger option to use the GL-500

• WSSWK Storm Water Kit

• Sampler Rain Sensor

• Sampler Flow Sensor

• BC100 Smart Battery Charger

• Quick Release Pump Head

Model WS Series Water Samplers

Type Peristaltic combined composite/discrete sampler

Flow rate 1000 ml/min at a 4 ft head

Max. Lift ~20 ft

Start Delay 16 time settings from 0 to 12 hrs

Composite Interval 15 time settings from 5 min to 12 hrs plus an external trigger mode setting

Sample Size 15 composite sample sizes from 50 ml to 2 L plus a full bottle discrete setting (approx. sizes at 4 ft head)

External Trigger Input(s) 250mS minimum pulse width switch closure or 4 to 24V DC

Pulse Output(s) 5V DC one-second pulse, 1000 ohm output impedance

Bottle Switch Input(s) Switch closure input, float switch in bottle

Rain & Water Sensors Optional moisture sensors or switch closure inputs

Internal Fuse 10A slow-blow

Battery Rechargeable 5 AH gel cell

Certificates CE Compliance

Dimensions

Weight

WS700, WS705, WS750 & WS755 17" L x 9" W x 22" H

WS700R 21.25" L x 20.5" W x 26.25" H

WS700 & WS705 20 lbs

WS750 & WS755 20 lbs

WS700R 20 lbs

Part Number Description Quantity

GW-CU0000 WS700 Single Bottle Water Sampler Each

GW-CL0500 WS700-IBO Ice Bag Water Sampler Each

GW-CD0500 WS700R Refrigerated Water Sampler, 115V AC Each

GW-CU1000 WS705 Improved Single Bottle Water Sampler Each

GW-CT0000 WS750 Dual Bottle Water Sampler Each

CW-CT1000 WS755 Improved Dual Bottle Water Sampler Each

*The WS705 and WS755 models provide the exact

Accessories

Part Number Description

but

GW-CTU500 Water Sampler Logger Option Each

GW-CTU500K Water Sampler Logger Option With Software Each

GW-CA0600 20-Mesh Pickup Strainer Assembly Each

GW-00-744 Tubing, Standard Sampler Pump Each

GW-CTU-000 WSSWK Storm Water Kit For Samplers Each

GW-FN0000 BC100 Smart Battery Charger Each

GW-CA0400 Sampler Rain Sensor Each

GW-CA0500 Sampler Flow Sensor Each

GW-00-546 Tubing, Sampler, Pick up 1/4"ID, Clear Each

GW-CA0100 Sampler Battery Cable Each

GW-CB0200 Sampler Float Switch, 1 Gallon Each

GW-00-418 1 Gallon Plastic Container Each

GW-01-342 Pump, Masterflex Easy-Load Each

GW-329955 XFRMR-AC/DC Wall Mount 18VDC 330mA Each

& LIQUID SAMPLING

WQS Water Quality Sampling System

Global Water has created a unique water quality sampling system. This system includes an easy-to-use lightweight triggered composite water sampler, a water quality process controller with relay outputs, and a data recorder that is Windows compatible. The compact water quality sampler system is portable for field installation and fully customizable to meet your needs.

Features

• Ideal for locating water quality trouble areas in wastewater, industrial, or stormwater systems

• Rugged construction for harsh environments

• Easy to use interface with user selectable sensor types

• Relay outputs for alarms, sampling or datalogging

• Scalable water quality triggers for taking composite samples

• Water quality sampler data recorder is Windows compatible

Water Quality Sampler System Controller

The Water Quality Sampler System Controller's LCD display shows the type of sensor that is being monitored, the data reading averaged over a user programmable time period, and the engineering units selected. The display also shows the current On or Off state for each of the process controller's 4 relays. Each of the process controller's relay is independently programmable to trigger on maximum and/or minimum threshold levels in one of five different control modes. Relay operation is defined by setting upper and lower sensor threshold levels and turning relays on when process controller sensor readings exceed a normally defined range. Visit the Water Quality Sampler System Controller page for more information.

Water Quality Sampler System Sampler

Global Water triggered Water Quality Sampler System Samplers are enclosed in rugged, rainproof, lockable carrying containers. Inside each standard water quality sampler container is a 2-gallon polyethylene waste water sample bottle for collecting composite samples, a peristaltic sampling pump, two knob control panel (No programming required) and a rechargeable gel cell battery. Other options include glass sample bottles, refrigerated containers, portable ice containers and more. Visit the WS700 Water Quality Sampler page for more information on the Water Quality Sampler System Sampler.

Water Quality Sampler Data Recorder

Global Water's Water Quality Sampler Data Recorder works with MS Windows software. The Water Quality Sampler Data Recorder monitors and logs both water quality value and time of the sample for your records. Data downloaded from the Water Quality Sampler Data Recorder can easily be opened in any PC spreadsheet program for analysis and graphic presentation. Visit the Water Quality Sampler Data Recorder page for more information.

Includes

• Triggered WS700 composite water sampler

• PC320 process controller

*Water quality sensor not included

Model WQS Water Quality Sampling System

Composite Water Sampler

Type Peristaltic combined composite/discrete sampler

Flow rate 1000 ml/min at a 4 ft head

Max. Lift ~20 ft

Sample Size 15 composite sample sizes from 50 ml to 2 L plus a full bottle discrete setting (approx. sizes at 4 ft head)

Battery Rechargeable 5 AH gel cell

Water Quality Sampler System Controller

Sensor Types/Units Level (ft, ", m, cm, custom), temperature (°F, °C, custom), pH (ph, custom), conductivity (uS, mS, custom), dissolved oxygen (%, mbar, ppm, mg/L, custom), ORP (mV, custom), turbidity (NTU, custom), wind speed (MPH, KPH, ft/Sec, m/Sec, custom), wind direction (°, custom), humidity (%, custom), solar radiation (W/M², custom), pressure (mbar, hPa, inHg, PSI, Pa, custom), custom (custom)

Display/Keypad 16 character x 2 line backlit LCD, 8-button tactile keypad

Sensor Resolution 7 digit maximum, auto-floating point

Accuracy Sensor accuracy + 0.1% + 1 digit

Analog Sensor Input 2-wire or 3-wire, 4-20mA, 0-5V DC, 0-1V DC

Analog Output 4-20mA scalable

Output Relays 4 independent SPDT relays

Contact Rating 8 A @ 250V AC, 5 A @ 30V DC resistive

Power Voltage 12V DC or 18-24V DC input, +/-10%

Supply Current 13mA + sensor current + backlight + 4-20mA output

Water Quality Sampler Data

Note WQS100 does not include datalogger

Memory Non-volatile flash memory

Power 12V DC rechargeable battery

Standby Current 70uA typical

Logging Current 5mA typical

Continuation...

Analog Sensor Inputs 4-20mA

Resolution 12-Bit, 4096 steps

Sensor Warm-up Time Programmable, 0-60 sec

WQS200 Water quality sensor + relay state + battery voltage monitor

WQS300 Water quality sensor + relay state + battery voltage monitor + 5 extra input channels

Digital Inputs

Maximum Input Voltage 24V DC

Maximum Frequency 100Hz

Minimum Pulse Width 2mS

Maximum Count 65,535 (16-Bit)

WQS200 None

WQS300 2

Sample Now Input Sample-on-demand input, software enabled (WQS300 only)

Maximum Input Voltage 24V DC

Minimum Pulse Width 2mS

Sample Modes Fixed interval programmable from 1 sec to >1 year

High speed 10 samples per second

Logarithmic sample rate (approximation)

Exception (log only on deviation from previous reading)

Storage Capacity WQS200 81,759 Recordings for all inputs plus time stamp

WQS300 40,879 recordings for all inputs plus time

Data Overwrite Select memory wrap or unwrap (unwrap will stop logging data once memory is full)

Dimensions 17" L x 9" W x 22" H

ERE Also Offers YSI’s ProSample Portable Automatic Samplers

YSI’s ProSample portable samplers feature a proprietary peristaltic pump for highly accurate sampling in applications such as surface water, stormwater, and wastewater. With multiple automated portable samplers to choose from and the ability to sample based on time, analog signal, digital pulse, and/or measurements from an SDI-12 device (ProSample P-12 and ProSample PM-12 models only), the ProSample can be the final piece of your monitoring installation. Composite sampling can be completed with all models, while discrete sampling can be completed with the ProSample P and ProSample P-12

ProSample P ProSample P-12

ProSample PM ProSample PM-12

Solinst Model 415 12V Submersible Pump

ProSample Portable Automatic Sampler

The Solinst 12V Submersible Pump is capable of pumping groundwater from 120 ft (36.5 m) below ground surface, with flow rates up to 13.5 L/min (3.6 US gpm) in shallow conditions. The continuous flow rate is very simple to adjust using the 12V Pump Controller's single dial. The 12V Submersible Pump's sleek, short (nominal 6") design means it fits easily down wells that may not be straight, without hang-ups.

Features

• Suitable for 2" diameter wells

• Robust ABS and PBT plastic construction

• Low flow through "variable speed box" possible

• Suitable for batteries with a minimum capacity of 40A.h

• High and low-flow groundwater sampling for general chemistry

• High purge rates when sampling using three volume purge protocol

• Performing constant head tests in high K (hydraulic conductivity) environments

• Pre-assembled kits with heavy gauge cable and alligator clips

Whale 12V Submersible Pumps

Features

• Suitable for 2" diameter wells

• Designed for water sampling and purging

• Robust ABS and PBT plastic construction

• Low flow through "variable speed box" possible

• Suitable for batteries with a minimum capacity of 40A.h

• Pre-assembled kits with heavy gauge cable and alligator clips

Includes

• 12V purger pump with attached cable

• Tube adapter

Part Number

Recommended Pumping Duration Intermittent use, running periods should be restricted to 15 minutes followed by a 5-minute cool-down period

Tubing Required

WA-5/8-LDPE-100 or WA-1/2-LDPE-100

*Tubing WA-5/8-LDPE-100 requires the adapter that is supplied with the pump

*Tubing WA-1/2-LDPE-100 does not require the adapter

*200 ft and 500 ft rolls of tubing also available

WA-5/8-LDPE-100 or WA-1/2-LDPE-100

WA-5/8-LDPE-100 or WA-1/2-LDPE-100

How Does The 12V Submersible Pump Work?

1. 12V Submersible Pump connects to the 12V Pump Controller (which can sometimes be an option for certain pumps)

2. Clips to a 12V power source 3. 1/2" or 3/8" I.D. LDPE sample tubing is pushed onto the barbed fitting on the 12V Pump

4. When used with a controller: the dial on the 12V pump controller is turned clockwise to increase the voltage to the controller, which turns the pump's motor faster and increases the

12V Proactive Standard Performance Pumps

Portable, used for purging, well development and low flow groundwater sampling.

Features

• Great for PFOA, PFOS & PFAS sampling

• Manufactured using 100% virgin plastic, PVC coated wire

• Each pump comes field-ready complete with wire, connectors, dome-shaped

• Rated for 400+ hours under harsh conditions

• Simple to use connect tubing, connect pump to 12V DC source and it’s ready to use

• Low flow valve sold separately

Part Number

Model

PRO-P-10100

PRO-P-10150

PRO-P-10200

Recommended Pumping

Tubing Required

Can run continuously in water without the need for a cool down (not recommended for 24+ hour pump test)

PRO-PA-10800

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Low Flow Sampling Controller

Optional

PRO-PA-10800

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller then stand back for awesome pumping power!

Features

• Engineered specifically for the 12V standard plastic pumps

• Precisely control the water discharge with the turn of a knob

• Used to monitor and regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy-duty reinforced plastic weatherproof case

• Connect 7 ft wire lead to battery clamps and 8 ft wire leads to pump connector

Optional

PRO-PA-10800

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Cyclone

Mini-Typhoon

Includes

• 12V Proactive standard performance pump

• Quick disconnect plug with battery clamps

PRO-P-10250

PRO-P-10300

PRO-P-10275

PRO-PSN-10000

PRO-P-10330

& LIQUID SAMPLING

3 ft - 3.20 GPM

10 ft - 2.80 GPM

20 ft - 2.20 GPM

30 ft - 1.75 GPM

40 ft - 1.20 GPM

50 ft - 0.75 GPM

55 ft - 0.60 GPM

60 ft - 0.40 GPM

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

GPM

ft - 2.50 GPM

ft - 2.20 GPM

ft - 1.50 GPM 50 ft - 1.00 GPM

55 ft - 0.75 GPM

60 ft - 0.60 GPM

70 ft - 0.25 GPM

3 ft - 4.00 GPM 10 ft - 3.50 GPM 20 ft - 3.00 GPM

30 ft - 2.90 GPM

40 ft - 2.75 GPM

50 ft - 2.40 GPM

60 ft - 2.00 GPM 70 ft - 1.50 GPM

80 ft - 1.00 GPM

85 ft - 0.60 GPM

Can run continuously in water without the need for

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

3 ft - 2.30 GPM 10 ft - 2.00 GPM

20 ft - 1.80 GPM

25 ft - 1.80 GPM

30 ft - 1.80 GPM

40 ft - 1.70 GPM

50 ft - 1.50 GPM

55 ft - 1.40 GPM

60 ft - 1.20 GPM

3 ft - 3.75 GPM

10 ft - 3.50 GPM

20 ft - 3.00 GPM

- 2.75 GPM

- 2.00 GPM

- 1.50 GPM

- 1.00 GPM 80 ft - 0.50 GPM 90 ft - 0.40 GPM

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Optional Accessories For Proactive Standard & High Performance Pumps

Features

• Ideal for low flow sampling (Fractional Flow™)

• Top-fitting accessory used to prevent water back-flow when technician shuts off pump

• Used with standard and high performance engineered plastic pumps

12V Proactive High Performance Pumps

Portable, used for purging, well development and low flow groundwater sampling.

Features

• Great for PFOA, PFOS & PFAS sampling

• Manufactured using 100% virgin plastic

• Rated for 400 hours under harsh conditions

• Run Pump system from batter y installed in your vehicle or a portable 12V AGM battery

• Proactive power booster controller models are required with this pump line

• Backflow-prevention

• Low flow valve sold separately

Part Number

PRO-P-10400

Model Tsunami®

Max. Pumping Depth

Dimensions

Pumping Depth - GPM

100 ft (30 m)

1.82" O.D. x 20" L

Watt 450 W

Voltage Range 12V - 15V

Max. Current Draw

Recommended Pumping Duration

30 A

PRO-PSN-10100

Supernova® 120 120 ft (36 m)

1.44" O.D. x 16" L

10 ft - 3.70 GPM

20 ft - 3.25 GPM

40 ft - 3.00 GPM

50 ft - 2.75 GPM

70 ft - 1.90 GPM

80 ft - 1.30 GPM

85 ft - 1.00 GPM

345 W 12V - 15V 23 A

Can run continuously in water without the need for a cool down Controller Required

Tubing Required

PRO-PA-10700 or PRO-PA-10750

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Required

PRO-PA-10960

WA-1/2-HDPE-100

WA-1/2-LDPE-100 Or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

*Power booster 1 and power booster 2 do not provide variable flow rate. If you are considering using the high-performance pump for low flow sampling then select the low flow with power booster controller compatible with the pump of choice.

Power Booster & Low Flow With Power Booster Controllers

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller and stand back for awesome pumping power!

Features

• Engineered specifically for the 12V high performance plastic pumps

• Power Booster 2 Controller:

Flow control dial set to lowest possible setting controller will produce 12V Flow control dial set to highest possible setting controller will produce 24V (Note: the controller is not intended to shut off the pump’s motor)

• Low Flow With Power Booster 1, 2 & 3 Controllers: Regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Constant voltage boosting technology (CVBT) allows the correct voltage to reach the pump’s motor

• Low voltage disconnect (LVD) at 10.75V (turns off controller)

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy-duty reinforced plastic weatherproof case

• Connect 7 ft wire lead to battery clamps and 8 f t wire leads to pump connector

Tsunami ®

Includes

• 12V Proactive high per formance pump

• Quick disconnect plug with battery clamps

Monsoon

PRO-P-10500

PRO-P-10510

Monsoon® Hurricane®

120 ft (36 m)

1.82" O.D. x 20" L

10 ft - 4.40 GPM

20 ft - 4.20 GPM

40 ft - 3.50 GPM

50 ft - 2.80 GPM

70 ft - 2.10 GPM

80 ft - 1.90 GPM

85 ft - 1.60 GPM

450 W

150 ft (45 m)

Mega-Monsoon

PRO-P-10520

Mega-Monsoon®

200 f t (60 m)

1.82" O.D. x 26" L 1.82" O.D. x 26" L

10 ft - 4.50 GPM

20 ft - 4.00 GPM

40 ft - 3.00 GPM

50 ft - 2.75 GPM

70 ft - 2.25 GPM

80 ft - 2.00 GPM 85 ft -1.75 GPM

510 W

10 ft - 4.00 GPM

20 ft - 3.75 GPM

40 ft - 2.75 GPM

50 ft - 2.50 GPM

70 ft - 2.00 GPM

80 ft - 1.75 GPM 85 ft - 1.75 GPM

600 W 12V - 15V 12V - 15V 12V

Can run continuously in water without the need for a cool down

Required

PRO-PA-10700 or PRO-PA-10750

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Required

PRO-PA-10700 or PRO-PA-10750

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Required

PRO-PA-10850

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Part NumberDescription

PRO-PA-10700 Power Booster 2 Controller

PRO-PA-10650 Low Flow With Power Booster 1 Controller

(Note: 30 A "Safety" Fuse To Protect Electronics & User)

PRO-PA-10750 Low Flow With Power Booster 2 Controller

(Note: 30 A "Safety" Fuse To Protect Electronics & User)

PRO-PA-10850 Low Flow With Power Booster 3 Controller

(Note: 50 A Resettable Breaker To Protect Electronics & User)

PRO-PA-10960 Low Flow With Power Booster 5 Controller

(Note: Engineered Specifically For Supernova® 120 Only)

12V Abyss® Standard & 12V Abyss® 300 Plastic Pumps

The engineered plastic 12V Abyss® pump’s low amp consumption makes it the ideal pump for groundwater sampling and remediation pump and treat situations.

Features

• Great for PFOA & PFAS sampling

• Can operate under harsher conditions with higher turbidity & can even run in oily, sandy liquid

• Easily fits into a schedule 40, 4" wells or larger

• Has a 3,000 hr motor life

• Can run off a 50 A gas powered 12V Crusader® gas driven generator

• Can be hooked up to a weatherproof 110/220V step down transformer which can turn any high voltage situation into a safe low voltage pump

• Simple to make it a solar pumping system by hooking up a solar panel arrangement to an 80 A solar charger and then to a deep cycle marine battery(ies)

Includes

• 12V Abyss® Standard or 12V Abyss® 300 pump

• Quick disconnect plug with battery clamps

Part Number

PRO-P-10380

PRO-P-10390 Name

Controller Optional PRO-PA-10800 Required PRO-PA-10950

Tubing Required

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

WA-1/2-HDPE-100

WA-1/2-LDPE-100 or

WA-5/8-HDPE-100

WA-5/8-LDPE-100

Low Flow Sampling & Low Flow With Power Booster 4 Controllers

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller then stand back for awesome pumping power!

Features For 12V Abyss® Standard Pump

• Engineered for the 12V Abyss® Standard plastic pump

• Precisely control the water discharge with the turn of a knob

• Used to monitor and regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy-duty reinforced plastic weatherproof case

• Connect 7 ft wire lead to battery clamps and 8 ft wire leads to pump connector

Features For 12V Abyss® 300 Pump

• Engineered specifically for the 12V Abyss® 300 plastic pump

• Regulates low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Constant voltage boosting technology (CVBT) allows the correct voltage to reach the pump’s motor

• Low voltage disconnect (LVD) at 10.75V (turns off controller or allows pump to pulsate)

• "Ramp Up" control dial

• Steel handle for comfort and control

• Heavy-duty steel weatherproof case

• Connect 3.5 ft wire lead to battery clamps and 4 ft wire leads to pump connector

30 A "Safety" Fuse To Protect Electronics & User)

12V Stainless Steel XL Pumps

Portable, used for purging, well development, low flow sampling and remediation.

Features

• Great for PFOA, PFOS & PFAS sampling

• Manufactured using 100% virgin Stainless Steel

• Each pump comes field-ready with wire, controller connector installed on a light-weight rugged steel locking reel with pump holster

• Bottom debris filter screen allows operation under harsh conditions with high turbidity

• Rugged, simple to use and lightweight

• Battery operated powered by a 12V DC vehicle, AGM or deep cycle marine battery

• EPA low flow sampling compliant

• Low flow valve sold separately

Includes

• 12V Stainless Steel XL pump

• Replaceable motor module

• Low flow control valve

• Wrench

Part Number

& LIQUID SAMPLING

Tubing Required

WA-1/2-HDPE-100

WA-1/2-LDPE-100

Low Flow With Power Booster 2 LCD XL, 2.5 LCD XL & 3 LCD XL Controllers

Simply connect the controller to a 12V deep cycle battery and connect the pump to the controller then stand back for awesome pumping power!

Features

• Low Flow With Power Booster 2 LCD XL is engineered specifically for 12 V Stainless Steel Monsoon® XL Pump

• Low Flow With Power Booster 2.5 LCD XL is engineered specifically for 12 V Stainless Steel Hurricaine® XL Pump

• Low Flow With Power Booster 3 LCD XL is engineered specifically for 12 V Stainless Steel Mega-Monsoon® XL Pump

• Precisely control the water discharge with the turn of a knob

• Regulate low flow sampling (Fractional Flow®) as low as 40 ml/min.

• Constant voltage boosting technology (CVBT) allows the correct voltage to reach the pump’s motor

• Breaker incorporated into controller

• "Ramp Up" control dial

• Heavy duty reinforced plastic controller

• Connect 7 ft wire lead to battery clamps and 8 ft wire leads to pump connector

Portable Bladder Pumps

Designed with input from field technicians who actually do the sampling! Single turn release head and quick change bladders allow for quick, in-the-field bladder changes and easy decontamination. Custom hose barbs allow the pump to be secured to tubing without the need for tubing clamps.

Features

• Constructed of 316 Stainless Steel

• No special tools or training required to service the pump

• Drop tube intake option allows for deeper sampling

• Compatible with geocontrol PROTM and 300 psi & 500 psi

BP Controllers

Replacement PE Bladder

Tubing Required Air WA-1/4-LDPE-100 WA-1/4-HDPE-100

Water (Discharge)

*Replacement PTFE bladders also available

AVAILABLE TO RENT

WA-3/8-LDPE-100

WA-3/8-HDPE-100

Dedicated Bladder Pumps

WA-3/8-LDPE-100

WA-3/8-HDPE-100

WA-1/4-LDPE-100

WA-1/4-HDPE-100

Bladder pumps can pump from as deep as 1000 ft (305 m) with minimal agitation for the best representative samples.

Features

• Constructed of 316 Stainless Steel for durability

• Proprietary resin grade virgin PTFE bladder for long life

• Robust screened intake extends bladder life

• True low flow capability for less agitation

• Optional "Drop-Tube" assembly available for sampling from greaterdepths

• Compatible with geocontrol PROTM and 300 psi & 500 psi

BP Controllers

Part Number

WA-1/4-LDPE-100

WA-1/4-HDPE-100

WA-1/4-LDPE-100

WA-1/4-HDPE-100

geocontrol PRO™

No more lugging heavy, dirty, and noisy compressors into the field or those dangerous nitrogen cylinders. The geocontrol PROTM saves you time, saves your back and saves you money!

Features

• Controls all portable and dedicated bladder pumps and most air lift pumps

• Built-in high performance air compressor allows sampling from depths of 180 ft (54 m)

• Built-in reverse polarity protection

• "Push Pull" tube fitting for easy tubing changes

• Operates from a 12V DC car battery, rechargeable battery or optional AC to DC power adapter

Includes

• geocontrol PROTM

• DC power cord

• Carrying case

Part

Max. Operating Depth

Max. Operating Pressure

Timer Discharge Time

Air ⁄Out Fitting

ft (54 m)

psi (6.8 bar) – self limited for safety

seconds min. / 75 seconds max.

Time 1.8 seconds min. / 75 seconds max.

0.25" O.D. "Push/Pull" fitting, 1/8" FPT allows for connection to any fitting option

Power Requirements 12V - 14V DC input @ 7.5 A 72 - 84 W usage

Ambient Operational Temp. 10°C - 40°C (50°F - 104°F)

Dimensions

Weight

Optional Carrying Case Dimensions

L x 4.80" W x 6.70" H

L x 8.25" W x 14" H

300 psi & 500 psi BP Controllers

These controllers utilize accurate microprocessor-controlled fill discharge timers to sustain true lowflow sampling techniques. Both controllers are equipped with high-pressure valves and fine resolution regulators that can perform in deep-well applications. They universally connect to any bladder pump system.

Features

• Designed for durable, trouble-free operation

• High pressure operation for greater depths

• Multiple power input options

• Microprocessor controlled timers for accuracy

• Internal over-pressure protection

• Battery over-draw protection

• Water Level Meter compatibility for well draw-down

• Intuitive user controls and status indicator

Included

• BP Controller

• "Air-In" & "Air-Out" hoses

• Clip adapter

• AC power supply

• DC power cord

• Drawstring bag

• Carry case

& LIQUID SAMPLING

Solinst Model 407 Stainless Steel Bladder Pumps

The 407 Stainless Steel Bladder Pumps provide consistent, accurate, reliable groundwater samples in all applications. Ensuring no air/water contact during operation, pumps are ideal for VOC sampling. PTFE bladders are ideal for dedication, while less expensive polyethylene bladders are available for those that prefer to change bladders after each use. Bladders and intake filters are easily replaced in the field in just a few minutes.

Features

• Constructed of 316 Stainless Steel

• Can lift from depths up to 500 ft (150 m) below grade

• Operates at almost any angle and can be placed under landfills, tailings, storage tanks or contaminant plumes

• Excellent for either regular flow or low flow sampling

• Pneumatic drive pumps are well suited for pumping contaminant liquids such as solvents and corrosive chemicals

• Pumps are not damaged by operation in sediment laden water, or in dry pumping conditions

• Meets US EPA standards for VOC groundwater monitoring

• Optional accessory available to prevent freezing in the sample line

• Used in conjunction with the Solinst 464 Electronic Pump Control Unit to provide continuous output of 100 ml/min. or less

SO-108207 1" x 2

x 2 ft 407 SS Bladder Pump With (3/8" O.D. Sample & 1/4" O.D. Drive) Barb Fitting Each SO114291 1.66" x 2 ft 407 SS Bladder Pump With (3/8" O.D. Sample & 1/4" O.D. Drive) Compression Fitting (No Teflon - Used For PFAS Applications)

Accessoires

SO-105088 2 ft Teflon Replacement Bladder For 1" 407 SS Bladder Pump*

2 ft LDPE Replacement Bladder For 1" 407 SS Bladder Pump*

SO-108525 2 ft LDPE Replacement Bladder For 1" 407 SS Bladder Pump*

SO-106364 2 ft Teflon Replacement Bladder For 1.66" 407 SS Bladder Pump*

SO-108523 2 ft LDPE Replacement Bladder For 1.66" 407 SS Bladder Pump*

SO-108526 2 ft LDPE Replacement Bladder For 1.66" 407 SS Bladder Pump*

SO-110227 2" Dedicated Well Cap

SO-103231 1.66" SS Drop Tube Assembly

SO-110343 4" Well Cap Adapter

*O-rings & tubing sold separately

Solinst Model 464 125 psi & 250 psi Electronic Pump Controllers

The 464 Electronic Pump Controllers allow faster purge rates and precise low flow control to ensure a representative sample at 100 ml/min or less when sampling for VOCs. Quick-connect fittings allow instant attachment to dedicated well caps, portable reel units and to an air compressor or compressed gas source.

Features

• Has automatic preset sample modes from low through high flow settings

• Up to 99 user-created flow rates can be saved in FRAM memory

• Uses 4 "AA" alkaline batteries that last up to 100 hours of normal use

• Can also be operated manually using only a compressed gas source

• Rugged, dependable and suitable for all environments Part Number Description

Accessoires

O.D. Tubing (Push)

Solinst Model 407 12V Oil-Less Compressor

The Solinst 12V Oil-Less Air Compressor is ideal for field use, especially low flow applications of less than 100 ft (30 m) depths.

Features

• Operates at up to 150 psi and is equipped with a 2 US gallon (7.6 L) air tank which is rated to 175 psi

• Operates using 12V DC power source, such as a car or truck vehicle battery

• Compact, lightweight 21 lbs

• Supplied with alligator clips Part

SO-106009 407 12V Oil-Less Compressor With Battery Clips (Low Flow) Each

Solinst Model 408M Micro Double Valve Pumps

The Micro Double Valve Pumps (Micro DVP) have a remarkably small and flexible design. As a positive displacement pneumatic pump, it uses coaxial PTFE tubing to give high quality samples. It is small enough to fit in 1/2" (13 mm) tubing and all channels of the Solinst Model 403 CMT Systems, as its diameter is only 3/8" (10 mm). A manifold at the top end of the pump has a 3/16" (5 mm) PTFE sample tube and a quick-connect fitting for easy attachment to a Control Unit. A multi-purge sampling head is also available for use with the CMT System.

Features

• Suitable for CMT Multilevel System, "Direct-Push"/"Drive-Points" and low flow groundwater monitoring in narrow applications

• Constructed of coaxial PTFE tubing with Stainless Steel fittings and a sintered 316 Stainless Steel 50 micron filter

• Pump body and filter assembly is 6" long x 3/8" diameter

• Flexible 3/8" diameter design fits almost anywhere

• Flow rates of 20 ml/min to 150 ml/min. are possible within narrow applications

• Filters are easily cleaned and replaced

• Durable and easy to operate using the pre-sets and custom sampling capabilities built into the Solinst Model 464 Electronic Control Unit

Pump Manifold with Quick-Connect for Drive Air and PTFE Sample Tube

& Manifold

& Manifold

& Manifold

Replacement Parts

Excellent Performance & Reliability!

Solinst Model 408 Stainless Steel Double Valve Pumps

The 408 Double Valve Pumps (DVP) are pneumatic drive pumps providing high quality, consistent samples and excellent VOC sample results. No bladder replacement is required and the Double Valve Pump provides higher pumping rates than with the Solinst Bladder Pumps. There is a selection of sizes and materials, variable flow rates and it is field serviceable. The air compressor or tank, pump controller, and flowthrough cell are easily transported to each site with the DVP. Compression fittings, quick-connect, and push-fit connections allow simple attachment to well caps or portable reels.

Features

• Suitable for low flow or regular flow sampling

• Constructed of Stainless Steel

• Two sizes: 5/8" diameter and 1.66" diameter

• Can operate to depths of 500 ft (150 m)

• Portable and dedicated versions are available

• Can be fitted with packers to control groundwater flow and limit purge requirements

• Pumps are not damaged by operation in sediment laden water, or in dry pumping conditions

• Easily disassembled for decontamination in minutes, without any tools

• All components can be cleaned with mild detergent or non-phosphate soap

Grab Sample Kit

Making your liquid sampling quick and easy. Sample from any stream, lake, river, reservoir etc....

Includes

• Telescopic pole

• Purcy clamp

• (8) 1 L Nalgene bottles

• Carrying case

Part Number Description

Grab Your Sample!

ER-GRBKIT-12 6 ft - 12 ft Grab Sample Kit

ER-GRBKIT-16 8 ft - 16 ft Grab Sample Kit

Replacement Parts

Part

ER-GRBCLAMP Purcy Clamp Each

ER-GRBPOLE12 6 ft - 12 ft Telescopic Pole Each

ER-GRBPOLE16 8 ft - 16 ft Telescopic Pole Each

ER-GRB1000ML 1 Liter Nalgene Bottle Each

ER-GRBCASE Carrying Case Each

Swing Sampler

The Swing Sampler is specifically designed to collect a sample from a horizontal flowing stream, such as a sewer.

Collects water samples quickly and easily!

Horizontal Water Sampler

This newly designed horizontal water sampler allows water to be sampled at specific depths. A 20 m calibrated line, marked at 1 m intervals, is included. The clear acrylic tube allows a visual inspection of the sample prior to dispensing and holds approximately 1,200 ml of sample.

Features

• Designed for educational use

• Suitable for sampling fresh, brackish or salt water

• Rugged Stainless Steel components

Part Number Description Quantity

LA- 1087 Horizontal Water Sampler Each

Features

• The end of the sampler swings allowing collection from different angles including 90°

• Telescopic fiberglass pole extends providing a long length for any sampling situation Includes

• Telescopic fiberglass pole

• Polyurethane holder

• Plastic snapper ring

• (1) 960 ml polyethylene bottle

Part Number Description

NA-B01310 6 ft -12 ft Telescopic Swing Sampler

NA-B01366 8 ft - 24 ft Telescopic Swing Sampler

Replacement Parts

Part Number Description Quantity

NA-B01354 Bottle Holder Each

ER-GRB1000ML 1 L Nalgene Bottle Each

The Extendable Sampler For Liquid Sampling

The TeleScoop consists of a telescopic pole with a detachable sample collecting attachment which makes this the perfect sampler to use when sampling from places such as overhead gantries, river banks, water outlets, etc.

Features

• Ideal for taking samples from liquids and suspensions

• Manufactured from robust, lightweight aluminum or stainless steel construction

• Easily adjustable to the required length

• The attachments are all interchangeable with the telescopic rods

Telescopic Rods

TeleScoop Attachments & Spares

Angular Beaker SS-5065B

Pendulum Beaker

SS-5065C

Stainless Beaker

SS-5065B

Bottle Holder

SS-5065D

Sample From Lakes, Rivers And Much More!

The 6000 Stainless Steel Sub Surface Samplers

The 6000 series sampler provides the reach that you need to sample from lakes, spillways, rivers, manholes and many other hard to reach locations.

Features

• Ideal for use in hazardous locations

• Sampling head is manufactured from high quality chemically resistant polypropylene and the metal parts are fabricated in Stainless Steel

• Optional displacement plunger available for sampling norms that require 1" space between the sample and the cap

• Supplied with one 1000 ml jar

Accessories

The Telescopic 7000 Aluminum Sub Surface Samplers

Features

• Sampling head is manufactured from high quality chemically resistant polypropylene and is connected to a handle assembly manufactured from telescopic aluminum poles

• Optional displacement plunger available for sampling norms that require 1" space between the sample and the cap

• Supplied with one 1000 ml jar

Bacon Bomb Multi-Layer Samplers

Multi-Layer Samplers function in hundreds of plants, including petroleum oil refineries, varnish sugar, chemical plants and fisheries.

Features

• Available in brass and bronze construction with heavy nickel plating and Stainless Steel

Accessories Accessories

• Weighted sampler obtains samples of any liquid

• Automatically opens when plunger touches bottom

• Manually opens at desired depth with a pull cord or extension rod

• Sampler closes when lifted and can be locked for transport

ne

The Different Types Of Coliwasa Samplers & Drum Thiefs Available

1. Standard samplers are manufactured from virgin HDPE material

2. Pre-Cleaned samplers have been washed to an EPA protocol and are individually packaged

3. Sterilized samplers are pre-cleaned, individually packaged and have been sterilized by gamma radiation

4. Anti-Static samplers are manufactured from virgin anti-static HDPE plastic to reduce the possibility of static discharge and sparking

Polyethylene Coliwasa Samplers

Polyethylene samplers are designed to extract samples from drums, tanks, tankers and rail cars.

Operation

1. Inser t sampler into drum or tank.

2. Pull up on handle to lock in place.

3. Remove sampler from tank.

4. Push down on handle to release the sample.

Note: Can be used to sample at specific depth by closing the valve before inserting the sampler and opening the valve by pushing down on the handle to open the valve once the desired sampling depth has been reached.

PTFE Coliwasa Samplers

PTFE Coliwasa samplers are ideal to use when sampling liquids and semisolid materials

Operation

1. Lower into the drum or tank with the valve assembly open to allow liquid to enter the sampler.

2. Pull the inner PTFE rod slightly upward to close the valve and seal in sample.

Accessories

Glass Coliwasa Samplers

The Glass Coliwasa samplers are designed to be an economical, safe and fast method of drum sampling.

Operation

1. Lower into the drum or tank with the valve assembly open to allow liquid to enter the sampler.

2. Pull the inner glass rod slightly upward to close the valve and seal in sample.

HDPE Plastic Drum Thiefs

The HDPE open-ended Plastic Drum Thief is used to sample drums, transformers and other liquid containers where small volume and low-cost sampling is required.

Operation

1. Insert the drum thief into your drum or container.

2. Cover the open end with your thumb.

3. Remove the sample.

CO-2405-25C HDPE

CO-2405-25S HDPE

CO-2405-25AS HDPE

CO-2405-25ASC HDPE

CO-2405-25ASSS HDPE

CO-2405-100 HDPE

Sterilized

Anti-Static

Anti-Static & Pre-Cleaned

Anti-Static, Pre-Cleaned & Sterilized

Glass Drum Thiefs

The Glass Drum Thiefs are used to sample drums, transformers and other liquid containers where small volume and low-cost sampling is required.

Operation

1. Insert the drum thief into your drum or container.

2. Cover the open end with your thumb.

3. Remove sample.

CO-5525-25 Borosilicate Glass

CO-5525-25C Borosilicate Glass

Borosilicate Glass

Borosilicate

Borosilicate Glass

*0.30" O.D. x 42" L also

*Tapered drum thiefs also available

Economy HDPE Dippers

The Economy Dippers are used for sampling from tanks, vats, streams, ponds, lakes and much more. They’re lightweight, easy to use and portable.

Long-Handled HDPE Dippers

Features

• Threaded 500 ml polypropylene cup can be exchanged to reduce cross contamination

• Two pouring spouts on cup allow left or right pouring

• High-density polypropylene plastic handles are strong honeycomb tubes without inserts and are ribbed for a sure grip

• Hand end has a hook for hanging & storage

The Long-Handled Dippers are used for sampling from tanks, vats, lakes etc. They provide chemical resistance and float without rusting or corroding.

Features

• Handle is welded to a rigid sampling bowl at a 45° angle for easier sampling from an elevated position

• Hardwood dowel encased in the 6 ft and 12 ft handle adds rigidity & strength

• 12 ft handle is available in one or two-piece screw-together construction

• Hand end has a hook for hanging & storage Accessories

Inf Z ne

Why Use A Disposable SteriWare® Device?

Quality

• Cross-contamination risk is eliminated - the device can be used straight from the bag

• No cleaning is required before or after sampling

• No cleaning validation (this is very expensive to set up and run)

• Most devices are manufactured in a cleanroom environment

• Suitable for all industries (pharmaceutical, food, chemical, cosmetic, biotechnology etc.)

• Many of our devices are suitable for use in ATEX Zones 0, 1 & 2

Financial

• Save time and money (it will cost more to clean a reusable sampler than to buy a disposable sampler)

Speed

• SteriWare® products can be used straight from the bag

Efficient Surface Sampling Of Liquids

Disposable SteriWare® Ladles

The SteriWare® Ladles are mainly used in production and laboratories. The one-piece molded design has been specially made

bung which are standard features on many barrels and kegs.

Features

• Ideally designed to quickly and efficiently take surface samples from liquids

• Manufactured from high quality HDPE or from blue PP

• Single piece, injection molded construction

• BSE/TSE free

• Made from FDA, EC 1935/2004 & EU 10/2011 conforming materials

• Available non-sterile & sterile (SAL 10-6)

• Individually bagged

Disposable SteriWare® LiquiDip Duo

The SteriWare® LiquiDip Duo sampler’s push-to-close valve on the base of the sampler automatically closes when it is pushed against the bottom of the container.

Features

• Ideal for taking both cross sectional & point samples of low and medium viscosity liquids

• Manufactured from high quality HDPE

• Ultrasonic welding construction

• BSE/TSE free

• Made from FDA, EC 1935/2004 & EU 10/2011 conforming materials

• Available non-sterile & sterile (SAL 10-6)

• Individually bagged

1. Ensure the top and bottom valves are open.

2. Push sampler into the container until it reaches the bottom.

3. Push sampler against the container base to close the valve.

4. Close top valve with hand to ensure liquid is trapped inside.

1. Close the top valve.

2. Push sampler into the liquid to the point required.

3. Open top valve and let liquid flow in.

4. Close top valve and remove sampler.

To

Avoid Handling Errors, One End Of The SteriWare® Jumbo Pipette is

Disposable SteriWare® Jumbo Pipettes

SteriWare® Jumbo Pipettes are available in different lengths, which means they are ideal for sampling anything from small containers up to 55 gallon drums. The 1100 mm version allows the user to reach the bottom of the container but their hand remains clear of the top.

Features

• Ideal for use with low viscosity liquids such as water

• Manufactured from high quality HDPE

• Ultrasonic welding construction

• Suitable for use in ATEX areas (450 mm & 900 mm lengths only)

• BSE/TSE Free

• Made from FDA, EC 1935/2004 & EU 10/2011 conforming materials

• Available non-sterile & sterile (SAL 10-6)

• Highly visible color-coded handle

• Individually bagged

Operation

1. Press thumb onto tube until you are at the correct sampling depth.

2. Raise thumb until levels equalize.

3. Press thumb onto tube to seal in the sample.

Note: The deeper the sampler is pushed into the liquid the larger the sample volume.

Unique Sealing System

A special FDA grade silicone seal is used which gives superior sampling action. It also prevents the sampler from dripping between use. Its smooth operation is the best in its class.

Low Cost Disposable Liquid Samplers

Disposable Thumb Tube & Micro Thumb Tube Pipettes

The Thumb Tube & Micro Thumb Tube Pipettes are ideal for use with a wide range of chemicals.

Features

• Ideal for obtaining a liquid sample from a low/medium viscosity liquid

• Manufactured from high quality HDPE (Thumb Tube Pipettes)

• Made from PP (Micro Thumb Tube Pipettes)

• Single piece, extrusion construction

• BSE/TSE Free

• Made from FDA, EC 1935/2004 & EU 10/2011 conforming materials

• Available non-sterile & sterile (SAL 10-6)

• Individually bagged

Operation

1. Press thumb onto tube until you are at the sampling depth.

2. Raise thumb until levels equalize.

3. Cover the end of the tube to seal in the sample.

Liquid Sampling Without Costly Cleaning

Disposable SteriWare® LiquiThiefs

The SteriWare® LiquiThiefs are a fast and convenient way of taking liquid samples. It is essentially a big syringe and is convenient for keg, container and drum sampling.

Features

• Ideal for use with low viscosity liquids such as water & light oils

• Manufactured from high quality HDPE or PP

• O-ring seal is made from virgin silicone rubber

• Ultrasonic welding construction

• Suitable for use in ATEX areas (500 mm & 1000 mm lengths only)

• BSE/TSE Free

• Made from FDA, EC 1935/2004 & EU 10/2011 conforming materials

• Available non-sterile & sterile (SAL 10-6)

• Individually bagged

Operation

1. Insert the sampler into the product.

2. At the required depth pull up the handle allowing the sample to be drawn into the sampler.

3. Withdraw sampler.

4. Push down handle to expel the sample.

Note: The further the handle is pulled the greater the sample volume.

*SS-8050H-500S

Single Use Sampler For High Viscosity Liquids

Disposable SteriWare® ViscoThiefs

The SteriWare® ViscoThiefs take fast samples of viscous materials like honey, creams, pastes and thick oils. Ideal for chemical, food and pharmaceutical quality control testing.

Features

• Ideal for use with high viscosity liquids such as oils & creams

• Manufactured from high quality HDPE or PP

• O-ring seal is made from virgin silicone rubber

• Ultrasonic welding construction

• Suitable for use in ATEX areas (500 mm & 1000 mm lengths only)

• BSE/TSE Free

• Made from FDA, EC 1935/2004 & EU 10/2011 conforming materials

• Available non-sterile & sterile (SAL 10-6)

• Individually bagged

Operation

1. Insert the sampler into the product.

2. At the required depth pull up the handle allowing the sample to be drawn into the sampler.

3. Withdraw sampler.

4. Push down handle to expel the sample.

Note: The further the handle is pulled the greater the sample volume.

SS-8055H-1000S

*SS-8055H-500S & SS-8055H-1000S are sterilized by gamma irradiation

*SS-8055H-1500S samplers are sterilized by electron beam

Excellent Chemical Resistance - GMP Correct

PTFE Mini Dipper & PTFE Dippers

Features

• Ideal for surface sampling a wide range of liquids

• Manufactured from pure, virgin PTFE (USP Class VI compliant & FDA conforming)

• Working Temperature Range: -200°C to +280°C

• Handle fixed in place for PTFE Mini Dipper

• Removable handle for PTFE Dippers

• Optional screw-in extension rods available to increase the length of the handle

• Easy to clean

PTFE Dippers

GMP Correct Liquid Sampler

316L Stainless Steel Dippers

The Stainless Steel Dippers are used to obtain samples from a wide range of environments including use in pharmaceutical, chemical and food industries. The sampler has a stainless steel cup welded to a long reach handle made from a solid stainless steel bar.

Features

• Ideal for taking surface samples from liquids and suspensions

• Manufactured from 316L Stainless Steel

• Surface finish of cup better than 0.5 μm Ra

• Surface finish of handle better than 1.0 μm Ra

• Fully welded construction

• Polished finish

• Easy to clean

Operation

1. Insert the sampler into the product.

2. At the required depth pull up the handle allowing the sample to be drawn into the sampler.

3. Withdraw sampler.

4. Push down handle to expel the sample.

Note: The further the handle is pulled the greater the sample volume.

Robust Polypropylene Dipper

Chemical Dippers

The Chemical Dippers are a quick and easy method of liquid sampling. These sample dippers are used to obtain a surface sample from a wide range of environments.

Features

• Ideal for general industrial applications

• Manufactured from durable PP

• Easy to clean

Used To Take A Sample At The Surface Of The Liquid

316L Stainless Steel Utility Dippers

The Utility Dippers are mainly used taking liquid samples from tanks, vessels, drums and kegs. Utility Dippers are designed to be very robust and they can be quickly dismantled for cleaning.

Features

• Ideal for sampling low viscosity liquids and suspensions

• Manufactured from 316L Stainless Steel

• Surface finish better than 0.5 μm Ra

• Easy to clean

Operation

1. Insert the sampler into the product, this will allow liquid will flow into the sampler.

2. Withdraw the sampler from the product.

3. Raise the center control rod to discharge the sample.

Single Point Liquid Sampler

316L Stainless Steel Liquid Cup Samplers

The Liquid Cup Samplers enable discrete samples to be easily taken from known heights within the product and set points within a tank.

Features

• Ideal for sampling for high and low viscosity liquids and suspensions

• Manufactured from 316L Stainless Steel

• Spring manufactured from stainless steel (not a product contact part)

• Surface finish better than 0.5 μm Ra

• Easy to clean

Accessories

Operation

1. Insert the sampler to the required depth.

2. Squeeze handle which pushes the cup away from the lid allowing the liquid to enter the cup.

3. After filling remove the sampler.

4. To empty the sampler either tip the sampler whilst squeezing the handle or unscrew the collecting cup.

Single Point Liquid Sampler

316L Stainless Steel Liquid Bottle Samplers

The Liquid Bottle Samplers are the perfect tool for taking liquid samples straight into the bottle. The spring-loaded mechanism means that the bottle remains closed in the liquid until you squeeze the handle. This means it is ideal for targeted point sampling.

Features

• Ideal for sampling low to medium viscosity liquids

• Manufactured from 316L Stainless Steel

• Bottle manufactured from soda-lime glass – USP Type III - Clear

• Spring manufactured from stainless steel (not a product contact part)

• Crevice free, all welds ground and polished

• External surface finish 0.5 μm Ra

• Supplied with a 500 ml clear glass bottle with lid

• Optional cover available that protects the glass bottle and helps keep the bottle dry during sampling

• Easy to clean

Operation

1. Push the sampler into the liquid.

2. At the required depth squeeze the handle to open the lid allowing the sample to be drawn into the sampler.

3. Close the lid by un-squeezing the handle.

4. Remove sampler.

Accessories

SS-8020N-1100 1100 mm L x 15 mm Diam. (43.3" L x 0.6" Diam.) Narrow Brush Each

SS-8020N-1600 1600 mm L x 15 mm Diam. (63" L x 0.6" Diam.) Narrow Brush Each 5031B-500 500 ml Spare Glass Bottle Each

Take Liquid Samples From A Known Point

316L Stainless Steel Fluid Point Samplers

The Fluid Point Samplers are mainly used for sampling pharmaceuticals, cosmetics and food products. In order to check that the material being sampled is homogeneous. The design allows rapid point sampling from drums, kegs and most containers.

Features

• Ideal for sampling low viscosity liquids and suspensions

• Manufactured from 316L Stainless Steel

• O-ring seal is made from silicone (FDA grade CFR 177.2600)

• Easy to clean

Operation

1. Insert the sampler into your liquid.

2. At the required depth pull the handle allowing the sample to be drawn into the sampler.

3. Withdraw sampler.

4. Push down handle to expel the sample.

Single Point & Cross Sectional Sampling

Liquid Masters

The Liquid Masters are convenient for taking samples of various liquids. This high quality liquid sampler is available in a range of lengths and diameters to give a range of sample volumes. The Liquid Master is easy to use and is designed to be completely dismantled into its component parts for quick and thorough cleaning.

Features

• Ideal for use with low viscosity and medium viscosity liquids such as water and light oils

• Choice of material (316L Stainless Steel, food grade PTFE or PP)

• Sampler tip seal arrangement prevents sample from dripping

• 316 L Stainless Steel version has an external surface finish better than 0.5 μm Ra and uses a silicone seal (FDA grade CFR 177.2600)

• PTFE/FEP version is made from FDA 21 CFR 177.1550, USP Class VI, EC 1935/2004 & EU 10/2011 conforming materials

• PP version is BSE/TSE free

• Complies with DIN ISO 15528

• Easy to clean

Operation - Technique 1 - Point Sampling

1. Insert the sampler into the product.

2. At the required depth press the push button to open the valve in the tip allowing the sample to be drawn into the sampler.

3. Withdraw sampler.

Operation - Technique 2 - Cross Sectional

1. Press the push button to open the valve in the tip and slowly insert the sampler into the product.

2. As the sampler is pushed in a cross sectional sample is taken.

3. Release the push button at the required depth to stop any more liquid from entering the sampler.

4. Withdraw sampler.

Note: To take a large sample the sampler needs to be inserted deep into the product.

Accessories

Reusable Sampler For Creams, Pastes & Gels

Viscous Samplers

The Viscous Samplers are convenient for taking samples of creams, shampoos, soaps, honey and other semi viscous materials. This high quality sampler is available in a range of lengths and diameters to give a range of sample volumes. The Viscous Sampler is easy to use and is designed to be completely dismantled into its component parts for quick and thorough cleaning.

Features

• Ideal for use with high viscosity liquids such as creams, pastes and gels

• Choice of material (316L Stainless Steel, food grade PTFE or PP)

• 316L Stainless Steel version has great chemical resistance and uses a silicone seal (FDA grade CFR 177.2600)

• FEP/PTFE version is ideal for strong acids and materials where chemical resistance is key

• PP version is ideal for general work and testing

• Easy to clean

Operation

1. Insert the sampler into the product.

2. At the required depth pull handle to draw product into the sampler.

3. Remove the sampler from the product and run the cleaning ring down the sampler to remove any product that adheres to the side of the sampler.

4. Push down the handle to push out the sample.

Accessories

Pump Samplers

Pump Samplers allow liquids to be simply and quickly sampled. The chance of cross contamination is greatly reduced by using new diptube and bottles for each sample.

Features

• Ideal for use with low to medium viscosity liquids

• Single point sampler

• Fast contamination free liquid sampling

• Highly efficient and is able to pump liquids from a depth of about 13 ft (4 m)

• PE, PTFE or 316L Stainless Steel product contact parts

Operation

1. Cut the sampling tube to the required length or use the precut sterile tube.

2. Screw the collecting bottle to the base of the hand pump.

3. Insert one end of the sampling tube through the hand pump and into the collecting bottle.

4. Drop the other end of the sampling tube into the product.

5. At the required depth pump the handle. Several pumps will fill the sample collecting bottle.

Note: The pump is not a product contact part. Only the tube and collecting bottle come into contact with the product being sampled.

PTFE Pump Sampler

Set SS-5020T-01

Includes

• Plastic hand pump with PTFE bottle adapter

• 180 ml PFA bottle

• 5 m PTFE sampling tube

• Tube cutter

• Stainless steel hose weight

• Carrying case

PE Pump Set

SS-5021P-150

Includes

• Hand pump

• (12) 150 ml PE bottles

• 13 m PE Sampling Tube

• Tube cutter

• Pen for recording results

• Carrying case

*250 ml kit also available

Stainless Steel Sampler

Set SS-5020S-02

Includes

• Stainless Steel hand pump with Stainless Steel bottle adapter

• (10) 100 ml PE bottles

• 10 m PE sampling tube

• Tube cutter

• Stainless steel hose weight

• Carrying case

LIQUID SAMPLING

Choosing The Right Drum Pump For Your Application!

Which One Do You Need? Pull Type Drum Pumps

Chemical compatibility is essential when choosing a drum pump.

Features

• Fits 55 gallon drums with a 2" bung adaptor

• 22 oz./stroke

• For use with a variety of liquids

• Available in Polypropylene, PVC or Stainless Steel

Your smarter, sustainable solution for liquid sample collection and testing.

500 BAGS VS. 500 BOTTLES Space saving collection container

GUARANTEED STERILE

Manufactured according to quality management systems

ISO9001:2015

• Uses less shelf space

• Easier disposal

• Durable

• Lower shipping costs

• Built-in closure

• Lower total cost

• EPA approved

WHIRL YOUR WAY TO A LIQUID LOCKING CLOSURE

STEP 1

STEP 2

STEP 3

Label your sample

STEP 4

Place liquid sample in bag.

To open, tear off the top along the perforation.

STEP 5

Use the Tyvek® pull tabs to open without contamination.

STEP 6

Hold bag by the tabs and whir 3 to 4 times to make a seal.

Bring the two wire ends together and twist tie them.

WHIRL-PAK®

Whether you are looking for sampling collection containers or collection tools, Whirl-Pak has curated products best suited for your industry’s sample collection and testing needs.

Plain, Sterilized Closure Bags

WHIRL-PAK® Standard Bags

WHIRL-PAK® Standard Bags support your most basic collection and testing needs. They are R-Nase, D-Nase, Pyrogen and BPH free and comply with regulatory and industrial requirements of the FDA, USDA, HACCP and EPA.

WHIRL-PAK® Write-On-Bags

WHIRL-PAK® Write-On Bags offer a feature for operational organization and traceability. Convenient write-on strip makes labeling quick and easy for clear sample identification. Pen or marker, WHIRL-PAK®’s film will dry quickly for a streak free and quick labeling of your samples.

Self-Standing Sterilized Closure Bags With

A White Write-On Strip

WHIRL-PAK® Stand-Up Bags

WHIRL-PAK® Self-Standing Bags work like a bottle without the cost and storage constraints. They have a gusseted bottom that unfolds when a sample is placed inside, allowing the bag to stand upright. By replacing bottles with these bags you will save on product and disposal costs, have a guaranteed sterilized container, ensure for a safe and clean lab with shatterproof material, and use only a fraction of the storage and disposal space.

* Dosed Stand-Up bags with a thiosulfate tablet included also available

Opaque, Sterilized Closure Bag With A White Write-On Strip

Whirl-Pak® Black Sterilized Bags

WHIRL-PAK® Black Sterilized Bags provide the maximum protection when comparing all other opaque bags on the market. With built-in secure closure tabs these bags are used for the shipping and storage of all forms of sample material that are sensitive to light. They are ideal for pharmaceuticals, spinal fluid, amniotic fluid, seasonings, flavors, food supplements, vitamins, marine life and many other liquid and solid samples.

Sampling Solutions That Meet Your Standards For Results You Trust

Heron Water Level Meters

•

•

•

•

•

•

•

•

•

•

•

•

Water Level Meters

(Series 1100, 1200, 1300, 1400, 1500, 1900, 4000)

The Heron water level meters are designed for well drillers, consultants, hydrogeologists and other groundwater professionals who require the most accurate measurements for their projects. They are manufactured to be modular for easy cleaning and servicing. Each meter comes with a rugged protective case to store and easily transport your instrument. All tapes marked in metric (mm, cm) or engineering scale (1/100').

Features

BUILT-INWell Hanger Support & Tape Guide

Carry Case FREE

With Unit Purchase

STAINLESS BALL BEARINGSEZ Wind

ELECTRONIC PANELModular Design, Fully Encapsulated To IP65

FIBERGLASS REINFORCEDTo Prevent Cracking In Frigid Temperatures

TAPE & PROBEModular Replacement, Only 2 Screws DONE!

SHEAR PIN STYLE LINKAGETo Save Your Tape In Event Of A Stuck Probe

dipper-Tag (Series 1500)

Dipper (Series 1300)

(Series 1900)

(Series 1400)

(Series 4000) dipper-T2 (Series 1200) dipper-T (Series 1100) Static

Fully

Teflon-Free Probe Option

3/8" (9.5 mm) Probe

Field Replaceable Probe

Well Depth Indicator Probe Option

Casing Indicator Probe Option

Tape Type (See Chart Below)

• Durable polyethylene tape

• Reinforced with stretch resistant Kevlar

• Dog bone profile

• ¼" wide

• Polyethylene tape

• S/S conductors (2)

• Oval profile

• Better than coaxial cable (+legibility)

• Durable polyethylene tape

• 4 High efficiency copper conductors

• Dog bone profile

Removable & Interchangeable Probe!

dipper-T (Series 1100) Water Level Meter With Detachable Water Level Probe

Features

• Measures depth to water accurately

• Easily collect drawdown data to calculate well production

• Removable and interchangeable probe

• Premium stainless-steel polyethylene coated tape (A)

• ⅝" water level probe (IP68) with holder

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Sensitivity dial to tune out cascading water

• Vinyl, ergonomic holding grip

• 9V battery

Includes

• dipper-T Water Level Meter

• Padded carrying case

/ Quality Polyethylene

*Tape model in imperial (ft) also available

*Tape model in imperial (ft) also available

Other Probe Options

HE-1102

Detachable Well Depth Indicator Probe

Detachable Well Casing Indicator Probe HE-1103

Detachable Teflon-Free Water Level Probe

Best Seller!

dipper-T2 (Series 1200) Water Level Meter With Fixed Water Level Probe

Features

• Measures depth to water accurately

• Easily collect drawdown data to calculate well production

• Fixed water level probe only

• Premium stainless-steel polyethylene coated tape (A)

• ⅝" water level probe with (IP68) with holder

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Sensitivity dial to tune out cascading water

• Vinyl, ergonomic holding grip

• 9V battery

Includes

• dipper-T2 Water Level Meter

• Padded carrying case

HE-1200-450M Metric

HE-1200-600M Metric

/ Quality Polyethylene

/ Quality Polyethylene

Accuracy / Quality Polyethylene

Fixed Water Level Probe

Level Probe *Tape model in imperial (ft) also available

Other Probe Options

For High Temperatures & Harsh Environments

dipper-Tough (Series 1400) Harsh Environment Water Level Meter

Features

• Measures depth to fluid accurately

• Easily collect drawdown data to calculate well production

• Fixed water level probe only

• Premium stainless-steel Kynar™ coated tape (B)

• ⅝" water level probe (IP68) with holder

• Tape directly embedded into the probe to withstand high temperatures and harsh environments

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Sensitivity dial to tune out cascading water

• Vinyl, ergonomic holding grip

• 9V battery

Includes

• dipper-Tough Water Level Meter

• Padded carrying case

HE-1400-60M

HE-1400-300M

*Tape model in imperial (ft) also available

water tape (Series 1900) Economical Water Level Meter

Features

• Measures depth to water accurately

• Easily collect drawdown data to calculate well production

• Fixed water level probe only

• Polyethylene tape with heat stamped markings (C)

• ⅝" water level probe (IP68) with holder

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Sensitivity dial to tune out cascading water

• Vinyl, ergonmic holding grip

• 9V Battery

Includes

• water tape Economical Water Level

• Padded carrying case

For Small Diameter Wells/Standpipes/Piezometers

SKINNY DIPPER (Series 1300) Narrow Diameter Water Level Meter

Features

• Measure depth to water accurately

• Easily collect drawdown data to calculate well productions

• Fixed water level probe only

• ¼" narrow polyethylene tape (D)

• ¼" water level probe with holder

• Better than coaxial cable water level meters (+ legibility)

• Probe pressure rated up to 100 m/300 ft for 20 minutes

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Sensitivity dial to tune out cascading water

• Vinyl, ergonomic holding grip

• 9V battery

Includes

• SKINNY DIPPER Narrow Diameter Water Level Meter

• Padded carrying case

model in imperial (ft) also available

Most Affordable & Basic Water Depth Instrument!

dipper-Tag (Series 1500) Multipurpose Tag Line

Features

• Measures depth to water acoustically with removable Delrin plopper

• Measure full well depth with weight

• Attach bailers for groundwater sampling

• Attach to data loggers to measure water levels and temperature for short term analysis

• Polyethylene tape (C)

• 1 ½" removable delrin plopper with ¾" stainless steel weight (IP68)

• Vinyl, ergonomic holding grips

model in imperial (ft) also available

Includes

• dipper-Tag Multipurpose Tag Line

• ¾" stainless-steel weight

• 1 ½" removable delrin plopper

• Stainless-steel spring clip

• (3) Biodegradable bailers

• Padded carrying case

H.Oil (Series 1600) Oil/Water Interface Meter

Features

• Measures interface levels between two liquids

• Detect floating product (LNAPL), sinking product (DNAPL) and water

• CSA intrinsically safe certification with class l, groups a, b, c and d in zones 0 & 1

• Premium stainless-steel Kynar™ coated tape (B)

• ¾" interface probe (IP68)

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Grounding lead

• Vinyl, ergonomic holding grip

• 9V battery

HE-1600-60M Metric

Kynar™

Accuracy/Quality Kynar™

Accuracy/Quality Kynar™

Interface Probe

Oil/Water Interface Probe HE-1600-150M

*Tape model in imperial (ft) also available

Excellent for early detection of saltwater intrusion (coastal sites) in areas with high levels of salinity

conductivity plus (Series 1700) Conductivity, Temperature & Water Level Meter

Features

• Ideal for measuring conductivity, temperature and water levels

• Accurately display conductivity up to 80,000 µS and temperatures up to 50°C

• Premium stainless-steel polyethylene coated tape (A)

• ⅞" conductivity probe (IP68)

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• High contrast LCD display

• Vinyl, ergonomic holding grip

• 9V battery

Conductivity Probe HE-1700-300M Metric

*Tape model in imperial (ft) also available

Accessories

Accurate Temperature Readings In Seconds!

dipper-Temp (Series 1800) Temperature & Water Lever Meter

Features

• For profiling temperature and static water levels

• Used in wells, boreholes, standpipes, lakes, rivers etc.

• Fixed water level probe only

• Premium stainless-steel Kynar™ coated tape (B) for profiling up to 130°C

• ⅝" temperature probe (IP68) with holder

• Electronic Panel with audio and visual signals (fully encapsulated to IP65)

• High contrast LCD display

• Audio "On/Off" control

• Vinyl, ergonomic holding grip

• 9V battery

Includes

• dipper-Temp Temperature & Water Lever Meter

• Padded carrying case

*Tape

(ft)

Kynar™

Kynar™

LongLiner (Series 4000) Motorized Water Level Meter

Features

• Measure Deeper Faster

• Easily collect drawdown data

• Fixed water level probe only

• Premium stainless-steel polyethylene coated tape (A)

• ⅝" water level meter probe (IP68) with holder

• Forward/Reverse 12V variable speed electric motor

• Remote speed controller, convenient handheld seated in magnetic saddle

• Electronic panel with audio and visual signals (fully encapsulated to IP65)

• Sensitivity dial to tune out cascading water

• Integrated, heavy-duty battery cables

• 9V battery

• LongLiner Motorized Water Level Meter

• Removable wheeled hand cart with folding handle

Other Probe Options

Fixed Probe With Weights

Fixed Teflon-Free Probe

Rugged, Portable & Affordable!

dipper-see EXAMINER (Series 2000)

Borehole Inspection Camera

Features

• For viewing & recording in holes 1" & wider

• White polyethylene tape

• ⅞" fully submersible camera probe (IP68) (replaceable) with holder

• External adjustable angle side to side, up/down monitor

• Record video for future playback at the office

• 160° wide viewing angle

• Ultra-bright LEDs

• 5 level LED brightness adjustment

• 7" Display resolution – 600 x 1024

• Batteries (5 hours running time each)

• DVR (with microphone) for audio & video recording

• Modular design for easy service/replacement

Includes

• dipper-see EXAMINER Borehole Inspection Camera

• Centralizer tool

• Retrieval hook

• (2) rechargeable Li-ion battery

• Compact battery charger

• 32GB SD card

• Rugged, wheeled carrying case

HE-2000-150M Metric White Polyethylene Tape 150 m

Replaceable Fully Submersible Camera Probe

HE-2000-300M Metric White Polyethylene Tape 300 m ⅞" Replaceable Fully Submersible Camera Probe

*Tape model in imperial (ft) also available

Accessories

Part Number Description

HE-2001 Retrieval Magnet

Most Portable Borehole Camera In The World!

dipper-See H2GO (Series 2200) Underwater Drop Camera

Features

• 1.25", 1080p HD rechargeable, fully submersible (IP68 camera probe)

• 7 Ultra-Bright Cree™ LEDs with 3 adjustable brightness options

• 170° wide viewing angle

• 100% custom electronics

• 1.25" wide x 7.85" long

• Battery status indication

• Record up to 5 hours of footage on a single charge

• Long term logging mode – leave in the well and record 20 seconds clips every hour for up to a month

• Insert microSD into smartphone/tablet or computer for footage playback

Part Number Description

HE-2200 dipper-See H2GO Underwater Drop Camera

Includes

• dipper-See H2GO Underwater Drop Camera

• Camera probe centralizer (for 4" & 6" Ø holes with #2 Philips screwdriver)

• Polyethylene deployment cord (75 m / 250 ft)

• 64GB microSD + SD Adapter

• USB-C charging cable with wall plug

• Rugged carrying case

HE-2224 Centralizer Kit (Includes: 4" & 6” Replacement Guides & Probe Clamp)

HE-2218 Charging Kit (Includes: Charging Cable & Wall Plug)

HE-2254 Rugged Carry Case Only

HE-2257 Rugged Carry Case With Accessories

HE-5025 75 m / 250 ft Polyethylene Deployment Cord

HE-5026 300 m / 1000 ft Polyethylene Deployment Cord

Need Help Choosing A Solinst® Water Level Meter?

1. Do you work in applications where you need to monitor falling water levels?

If yes, choose the Model 101D Water Level DrawDown Meter. It works as a Water Level Meter and using a toggle switch, can be changed to a Drawdown Meter where the probe signals in air instead of water. This feature is useful when a well is pumped and clients need to know exactly when a specific depth is reached. Applications include, purging of wells and performing aquifer tests (pumping, slug, etc.) to obtain information on aquifer properties.

2. Are your monitoring wells less than 25 m or 80 ft and is portability a priority?

If yes, choose the 102M Mini Water Level Meter with laser marked cable on a compact reel, small enough to fit in a backpack or small carrying case.

3. Are you working in applications where measurements are needed beyond 300 m or 1000 ft?

If yes, choose the Model 101 P7 Water Level Meter or the 101D Water Level DrawDown Meter with laser marked flat tape in lengths up to 1500 m (5000 ft).

4. Is the access/application narrow (<15 mm or 5/8")?

If yes, choose the Model 102 Water Level Meters with narrow coaxial cable and probe options. The Model 102 with P10 probe should be the Meter of choice for the majority of narrow applications. If access is <10 mm (3/8") ex: the channels of a Solinst CMT Multilevel System, then the P4 probe (4 mm diameter) is required.

5. Is depth sounding the well a requirement (ex: do you need to measure both the static water level and the depth to the bottom of the well (total well depth))

If yes, choose the Model 101 P7, 101D or Model 101B Water Level Meter.

• Best options: Model 101 P7 and 101D, as their probes are pressure-proof the full length of any tape.

• The 101B probe is leak-proof, however, tape lengths only go to 100 m and there is no sensitivity switch to turn the light and buzzer down when submersed.

Note: To help measure total depth in wells deeper than 30 m (100 ft), 101B P1 probe weights can be added to a 101 or 101D tape to help the probes reach bottom more easily.

6. Are you looking for a very basic unit without any extra features (ex: sensitivity adjustment, battery test button)?

If yes, choose the Model 101B Water Level Meter. It is very simple and inexpensive. It is, however, limited to 30 m, 60 m, and 100 m lengths in metric only.

WATER & LIQUID MONITORING

Best Seller!

Model 101 P7 Water Level Meter

With Laser Marked Flat Tape

Features

• Measures depth to water accurately

• Ideal for measuring the depth to water in wells, boreholes, standpipes and tanks

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft

• 5/8" P7 submersible 316 stainless steel probe with Delrin® tape seal plug

• Electronic panel with audio and visual signals

• "On/Off" sensitivity switch to tune out cascading water

• Battery test button

• Stand-alone design, ergonomic holding handle and sturdy probe holder

• 9V battery

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

PVDF Laser Marked Tape

PVDF Laser Marked Tape

PVDF Laser Marked Tape

Model 101 P2 Water Level Meter With Heat Embossed PE Flat Tape

Features

• Measures depth to water accurately

• Ideal for measuring the depth to water in wells, boreholes, standpipes and tanks

• 3/8" width heat embossed polyethylene flat tape marked each mm or

• 0.55" P2 316 stainless steel probe with neoprene heat shrink seal

• Electronic panel with audio and visual signals

• "On/Off" sensitivity switch to tune out cascading water

• Battery test button

• Stand-alone design, ergonomic holding handle and sturdy probe holder

• 9V battery

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

Economical & basic, yet durable instrument to measure groundwater levels

Model 101B Basic Water Level Meter With Heat Embossed PE Flat Tape

Features

• Measures depth to water accurately

• Ideal for measuring the depth to water in wells, boreholes, standpipes and tanks

• 3/8" width heat embossed polyethylene flat tape marked each cm

• 5/8" P1 316 stainless steel probe

• Electronic panel with audio and visual signals

• Sturdy frame and ergonomic handle for winding the tape

• 9V battery

• Carrying case sold separately

SO-103921 Model 101 Tape Guide For The Water Level Meter SO-102974 Small Padded Nylon Carrying Case (For Meters With A

*CM3: meters in red: with markings every centimeter

Both Static Water Level & DrawDown In One Meter!

Model 101D Water Level DrawDown Meter With Laser Marked Flat Tape

Features

• Measures depth to water accurately and monitoring drawdown

• Monitors falling hydraulic head during low flow sampling, pumping and other aquifer/well tests

• Ensures a pump’s intake remains submerged during purging or well development

• Ideal for measuring the depth to water in wells, boreholes, standpipes and tanks

• Monitoring drawdown during low flow groundwater sampling, well development and purging, dewatering applications, pumping, slug, hydraulic conductivity, step and other aquifer/well tests

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft

• 5/8" P7 submersible 316 stainless steel probe with Delrin® tape seal plug

• Electronic panel with audio and visual signals

• "On/Off" sensitivity switch to tune out cascading water

• Water level/drawdown mode switch

• Battery test button

• Stand-alone design, ergonomic holding handle and sturdy probe holder

• 9V battery

• Supplied with model 101 tape guide

• Carrying case sold separately

Padded Nylon Carrying Case (For Meters

& centimeters: with markings every mm

For Small Diameter Wells, Standpipes & Piezometers

Model 102 Mk2 P10 Water Level Meter

With Laser Marked Cable

Features

• Measures depth to water accurately using narrow polyurethane cable

• Ideal for measuring groundwater levels, especially in small diameter tubes and piezometers, or where a flexible assembly is needed to get past down hole instrumentation

• 0.12" width polyurethane laser marked coaxial tape marked each mm or 1/100 ft

• 3/8" P10 316 stainless steel probe with (10) stainless steel weights

• Electronic panel with audio and visual signals

• "On/Off" sensitivity switch to tune out cascading water

• Battery test button

• Ergonomically designed to be comfortable in use and stable when placed on the ground

• 9V battery

• Supplied with model 101 tape guide (excluding model Mini SO-114864)

• Carrying case sold separately Part

SO-114864 (Mini) Metric Polyurethane Laser Marked Coaxial Tape

SO-114885 Metric Polyurethane Laser Marked Coaxial Tape P10/N3

SO-114888 Metric Polyurethane Laser Marked Coaxial Tape

SO-114891 Metric Polyurethane Laser Marked Coaxial Tape P10/N3

SO-114894 Metric Polyurethane Laser Marked Coaxial Tape P10/N3

SO-114897 Metric Polyurethane Laser Marked Coaxial Tape P10/N3

SO-114900 Metric Polyurethane Laser Marked Coaxial Tape P10/N3

SO-106253 Mini Padded Nylon Carrying Case (For Meters With A Tape Length Of

SO-102974 Small Padded Nylon Carrying Case (For Meters With A Tape Length

SO-100109 Medium Padded Nylon Carrying Case (For Meters With A Tape Length

*Tape model in imperial (ft) also

*N3: meters & centimeters: with markings every mm

Model 102 Mk2 P4 Water Level Meter

With Laser Marked Cable

Features

• Measures depth to water accurately using narrow polyurethane cable

• Ideal for measuring groundwater levels, especially in small diameter tubes and piezometers, or where a flexible assembly is needed to get past down hole instrumentation

• 0.12" width polyurethane laser marked coaxial tape marked each mm or 1/100 ft

• 0.157" P4 316 stainless steel probe with no weights

• Electronic panel with audio and visual signals

• "On/Off" sensitivity switch to tune out cascading water

• Battery test button

• Ergonomically designed to be comfortable in use and stable when placed on the ground

• 9V battery

• Supplied with model 101 tape guide (excluding model Mini SO-114909)

• Carrying case sold separately

*N3: meters & centimeters: with markings every mm

Probe

Fixed Water Level Probe

Model 103 Tag Line With Laser Marked Cable

Features

• Measures well depths and is ideal as a multipurpose marked support line

• Accurately measure depth to backfill during construction and installation of monitoring wells

• Measured safety support line for deployment of pumps, bailers, samplers, and dataloggers and packers

• Perfect for use when installing Solinst Model 403 CMT Multilevel Systems

• 1/16" durable polyethylene coated stranded stainless steel wireline laser-marked every 5 cm or 1/4 ft with a minimum break strength of 270 lbs (122 kg)

• 3/4" standard stainless steel tag weight (optional 1/2" narrow stainless steel tag weight sold separately)

• Sturdy free-standing reel with a carrying handle, weight holder and brake

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

Padded Nylon Carrying Case (For Meters

*Tape model in imperial (ft) also available

Model 103 Tag Line With Laser Marked Flat Tape

Features

• Measures well depths and is ideal as a multipurpose marked support line

• Accurately measure depth to backfill during construction and installation of monitoring wells

• Measured safety support line for deployment of pumps, bailers, samplers, and dataloggers and packers

• Perfect for use when installing Solinst Model 403 CMT Multilevel Systems

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft with a break strength of greater than 220 lbs (100 kg)

• 3/4" standard stainless steel tag weight (optional 1/2" narrow stainless steel tag weight sold separately)

• Sturdy free-standing reel with a carrying handle, weight holder and brake

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

Features

• Detects base of steel well casing and measures the total depth of a well or borehole

• Ideal for measuring total well depth, groundwater well installation, detecting gaps in well casing, installing telescoping well screen, packer and downhole instrument installation, hydrofracturing, confirming existing well construction and decommissioning abandoned wells

• Greater accuracy as it utilizes a base-sensing plunger that activates a visual and auditory signal and the depth is then read from the tape

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft

• 7/8" PWCD submersible 316 stainless steel probe with Delrin® tape seal plug, a strong internal magnetic assembly to detect metal casing and a plunger assembly to measure total well depth

• Electronic panel with audio and visual signals

• "On/Off" switch

• Battery test button

• Sturdy, standalone reel with ergonomic handle and brake

• 9V battery

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

SO-114443

Laser Marked Tape

Laser Marked Tape

Metric PVDF Laser Marked Tape

PVDF Laser Marked Tape

Laser Marked Tape

Detachable

Level Probe SO-114446 Metric PVDF Laser Marked Tape

Level Probe SO-114447 Metric PVDF Laser Marked Tape

SO-114448

PVDF Laser Marked Tape

PVDF Laser Marked Tape

Detachable Water Level Probe

Detachable Water Level Probe

Detachable Water Level Probe SO-102974 Small Padded Nylon Carrying Case (For Meters With A Tape

SO-100109 Medium Padded Nylon Carrying Case (For Meters With A

Model 107 TLC Meter With Laser Marked Flat Tape

Features

• Measures level, temperature and conductivity

• Measures conductivity from 0-80,000 μS/cm with an accuracy of 5% or 100 μS/cm (whichever is greater)

• Ideal for profiling conductivity and temperature in wells and open water

• Perfect for use in salinity studies, saltwater intrusion investigations, testing for water quality impairments from road salt, tracer tests, general indication of chemical contamination level and early warning of changes in water quality at landfills and industrial sites

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft

• 3/4" TLC submersible 316 stainless steel probe with Delrin® tape seal plug

• Electronic panel with audio and visual signals

• "On/Off" switch

• LCD display and menu button

• Sturdy, standalone reel with ergonomic handle and brake

• 9V battery

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

HA-7031L 1413 μS/cm Conductivity Calibration Solution, 500 ml

HA-7039L 5000 µS/cm Conductivity Calibration Solution, 500 ml

HA-7030L 12880 µS/cm Conductivity Calibration Solution, 500 ml

HA-7034L 80000 µS/cm Conductivity Calibration Solution, 500 ml

SO-102974 Small Padded Nylon Carrying Case (For Meters With A Tape Length Of

SO-100109 Medium Padded Nylon Carrying Case (For Meters With A Tape Length

*Tape model in imperial (ft) also available

*LM3: meters & centimeters: with markings every mm

Model 201 Water Level Temperature Meter With Laser Marked Flat Tape

Features

• Measures level and temperature

• Accurately measure temperature from -20ºC to +125ºC

• Ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open water

• Perfect for use in detecting runoff, points of inflow, or other sources of thermal pollution, early warning of changes in water quality, including dissolved oxygen levels and conductivity, monitoring and predicting changes in aquatic environments, and geothermal drilling and studies

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft

• 5/8" PT submersible 316 stainless steel probe with Delrin® tape seal plug

• Electronic panel with audio and visual signals

• "On/Off" switch

• LCD display and menu button

• Sturdy, standalone reel with ergonomic handle and brake

• 9V battery

• Supplied with model 101 tape guide

• Power reel availability for longer lengths of tape sold separately

• Carrying case sold separately

SO-102974 Small Padded Nylon Carrying Case (For Meters With A Tape Length

SO-100109 Medium Padded Nylon Carrying Case (For Meters With A Tape Length Of

*Tape model in imperial (ft) also available

*Custom lengths to a maximum of 1500 mm / 5000 ft also available

*LM3: meters & centimeters: with markings every mm

How Do Interface Meters Work? Inf Z ne

Simply, the meters provide two different signals depending on if they are in product or a fluid like water that is conductive.

To detect liquids, Solinst® Interface Meters use an infra-red beam and detector. When the probe enters a liquid the beam is refracted away from the detector and an audible tone and light is emitted.

If the liquid is non-conductive (as is the case with LNAPL and DNAPL) a steady tone and light signal the presence of product. If the fluid is conductive (water) , a conductivity circuit is completed. This overrides the infra-red circuit, and the tone and light are intermittent.

Operating Principles

Product (Non-Conductive Liquid) = Steady Light & Tone

Water (Conductive Liquid) = Intermittent Light & Tone

Model 122M Mini Interface Meter With Laser Marked Cable

Features

• Oil/water interface meters give clear and accurate measurements of product level and thickness in wells and tanks

• Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy

• Ideal to detect the presence, or absence, of product (ex: hydrocarbons, diesel fuel, oil - fluids that have very low electrical conductivity)

• 0.12" width narrow white PVDF laser marked coaxial cable marked each mm or 1/100 ft

• 5/8" P8 316 stainless steel probe pressure proof, up to 500 psi with a Hydex coneshaped tip

• Electronic panel with audio and visual signals

• Infra-red refraction is used to detect liquids and conductivity to distinguish water

• "On/Off" switch

• Stable electronics with automatic circuitry testing

• Clear signals and high accuracy

• 9V battery

• Certified for use in hazardous locations, Class I, Div 1, Groups C&D (CSA Standards)

• ATEX certification under directive 94/9/EC, as II 3 G Ex ic IIB T4 Gc

• Carrying case sold separately

SO-110942 Metric Narrow PVDF Laser Marked Coaxial Cable P8/LN3

SO-103921 Model 101 Tape Guide For The Water Level Meter

SO-106253 Mini Padded Nylon Carrying Case (For Meters With A Tape Length Of 25 m (85 ft)

*Tape model in imperial (ft) also available

*LN3: meters & centimeters: with markings every mm

Model 122 Interface Meters With Laser Marked Flat Tape

Features

• Oil/water interface meters give clear and accurate measurements of product level and thickness in wells and tanks

• Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy

• Ideal to detect the presence, or absence, of product (ex: hydrocarbons, diesel fuel, oil - fluids that have very low electrical conductivity)

• 3/8" width non-stretch PVDF laser marked flat tape marked each mm or 1/100 ft

• 5/8" P8 316 stainless steel probe pressure proof, up to 500 psi with a Hydex cone-shaped tip

• Electronic panel with audio and visual signals

• Infra-red refraction is used to detect liquids and conductivity to distinguish water

• "On/Off" switch

• Stable electronics with automatic circuitry testing

• Clear signals and high accuracy

• Sturdy free-standing reel with carrying handle

• 9V battery

• Supplied with model 101 tape guide

• Certified for use in hazardous locations, Class I, Div 1, Groups C&D (CSA Standards)

• ATEX certification under directive 94/9/EC, as II 3 G Ex ic IIB T4 Gc

• Carrying case sold separately

When should you use the Model 104 Sonic Water Level Meter to measure depth to water in a well versus a standard water level meter or datalogger?

• In crooked or obstructed wells where equipment can potentially be entangled

• At contaminated sites (concerns of cross contamination from well to well and decontamination of equipment)

• Use when fast manual single point data collection is required

• Ideal for use in narrow, cascading, or difficult to access water level wells

How accurate is the Model 104 Sonic Water Level Meter and how long does it take to collect a reading?

In ideal situations, it can be accurate to 3 cm (0.1 ft) and takes approximately 1-4 seconds to provide a reading dependent on depth to water. When increased accuracy is required, the control unit can be used to enter site specific well details (measurement parameters) such as:

• Drop tube diameter

• Min/max water level measurement

• Water temperature

• Offset of probe from ground level

For well openings greater than 1" diameter, the plastic disc should be used to cover the well opening. Sealing off the top of the well facilitates a strong signal (pulse is an air pressure /low frequency sound wave) that provides greater accuracy and prevents external interferences from affecting the reading.

How does it work?

The Sonic Water Level Meter works by the Probe transmitting a sound wave into the pipe or well and measuring the time it takes for the pulse to return after making contact with water. The distance to water is calculated using the speed of sound and time. Since the speed of sound varies with temperature, a temperature sensor is located in the probe to adjust for variations. To account for different well diameters, offsets, well obstructions or features, the Control Unit allows you to input measurement parameters to get the most accurate water level reading possible.

104 Sonic Water Level Meter No Contact With Water Surface Required!

Features

• Portable, acoustic ranging instrument designed to simply and quickly measure depth to static water level in a well, piezometer, sounding tube, or any closed pipe

• Reports static water level measurements without having to put any instruments down the well, eliminating any introduction of chemicals and the need to decontaminate equipment or wells

• Works in straight or crooked wells/pipes and tubes ranging in diameter from 0.5" (1.3 cm) to 8" (20 cm) with water levels from 3 m (10 ft) to 600 m (2000 ft) from surface

• Clear LCD display and keypad

• Ability to set in "Power Save" mode to prolong battery life

• Can set the water level measurement range minimum and maximum to ignore interference from known well features

• Settings allow you to account for different well/ drop tube diameters and heights

• 5/8" probe diameter

• 6 ft cable length

• Units of measurement: metric or English options

• Probe is designed to sit in the vent opening of a standard well cap, or the opening in a Solinst 2" locking well cap

• Plastic disc is used to cover the well opening for measurement in larger diameter openings

Includes

• Control unit

• Probe

• 6 ft cable

• Disc

• (6) AA replaceable batteries

• Field bag

Need Help Selecting The Right Solinst® Levelogger® 5?

1. What is the anticipated change in water level?

Leveloggers® should be placed deep enough below the surface of the water to remain submerged. This maximum submergence is then used to select the appropriate range of Levelogger®. (M5/F15 = 5 meters/15 feet)

2. Will data be collected for a day or longer?

Data collection needed for minutes to hours:

• Although we always suggest compensating for barometric pressure changes, you could assume minimal change in atmospheric pressure, so a Barologger may not be required

Data required for multiple days:

• To maintain accuracy , use a Barologger 5 to correct for atmospheric change - PT#114608 (One Barologger can be used to compensate all Leveloggers® in a 20 mile (30 kilometer) radius and/or with every 1000 feet (300 meter) change in elevation.)

3. Do you want to communicate and view data with the Levelogger® downhole?

If yes, you need a Levelogger® 5 App Interface (SO-115009) or PC Interface Cable (SO-109609). Choose Direct Read Cable (DRC) specify lengths (including shorter length for Barologger, if required).

If no, you need either a Desktop Reader 5 (SO-114404) or Field Reader 5 (SO-114403). Choose suspension stainless steel wireline or Kevlar cord.

4. What length of wireline/cord or Direct Read Cable do you need?

You need to add the anticipated change in water level to the static water level (depth to water from ground surface).

Stainless steel wireline or Kevlar cord assemblies are available to 500 ft.

Direct Read Cables are available up to 1500 ft, specify lengths:

• 5 ft – 500 ft (at 5 ft increments)

• 510 ft – 1000 ft (at 10 ft increments)

• 1050 ft – 1500 ft (at 50 increments)

5. How do you want to communicate with your Levelogger® 5?

Remove from monitoring location and use a laptop or computer and PC Software:

• You will need either a Desktop Reader 5 (SO-114404) or a Field Reader 5 (SO-114403)

Levelogger® 5 remains on site, installed on a *DRC (or use a Direct Read to Optical Adaptor)

• Laptop and PC Software: PC Interface Cable (SO-109609)

• Smart Device, Apple® or Android™ and Solinst Levelogger App: Levelogger® 5 App Interface (SO-115009)

• USB memory device (for downloading data only): Data Grabber (SO-115007)

Best Seller! High Quality Water Level & Temperature Datalogger

Model 3001 Levelogger® 5

Features

• Records highly accurate groundwater and surface water level and temperature measurements

• It combines a robust Hastelloy pressure sensor, temperature detector, 10-year lithium battery datalogger

• 22 mm x 160 mm stainless steel housing

• Baked-on coating using polymerization technology protects the body against corrosion, abrasion and high temperatures

• Hastelloy sensor has excellent performance in harsh environments and can withstand 2 times overpressure without permanent damage

• Readings are stable in extreme pressure and temperature conditions

• Hastelloy sensor can withstand 2 times over-pressure without permanent damage

• Single-eye optical for easy cleaning and more reliable, faster communication

• Memory for 150,000 sets of readings

• Stronger, more robust design: double O-ring seals for increased leakage protection

• Better thermistor sensitivity: upgraded platinum RTD

Applications

• Aquifer characterization: pumping tests, slug tests, etc.

• Watershed, drainage basin and recharge monitoring

• Stream gauging, lake and reservoir management

• Harbor and tidal fluctuation measurement

• Wetlands and storm water run-off monitoring

• Water supply and tank level measurement

• Mine water and landfill leachate management

• Long-term water level monitoring in wells, surface water bodies and seawater environments

Accurate Barometric Compensation

Model 3001 Barologger 5

Leveloggers® measure absolute pressure (water pressure = atmospheric pressure). In order to accurately determine the true changes in water level only, barometric pressure fluctuations must be removed from the data.

Features

• Barologger 5 is set above high-water level in one location on site

• One Barologger can be used to compensate all Leveloggers® in a 30 km (20 mile) radius and/or with every 300 m (1000 ft) change in elevation

• The Levelogger® Software Data Compensation Wizard automatically produces compensated data files using the synchronized data files from the Barologger and Leveloggers® on site

• Barologger 5 uses pressure algorithms based on air rather than water pressure, giving superior accuracy

• The recorded barometric information can also be very useful to help determine barometric lag and/or barometric efficiency of the monitored aquifer

Cost Effective Water Level & Temperature Datalogger

Model 3001 Levelogger® 5 Junior

Features

• Inexpensive alternative for measuring groundwater and surface water levels and temperature

• Combines a robust Hastelloy pressure sensor, temperature detector, a datalogger and 5-year battery (based on a 1-minute sampling rate)

• 22 mm x 160 mm stainless steel housing

• Hastelloy® sensor has excellent performance in harsh environments and can withstand 2 times overpressure without permanent damage

• Accuracy of 0.1% FS

• Memory for 75,000 data points

• Single-eye optical for easy cleaning and more reliable, faster communication

Applications

• Monitoring water levels in wells and surface water

• Pump and slug tests

• Reservoir and stormwater runoff management

• Watershed and drainage basin monitoring

• Stream gauging, lake and wetland monitoring

• Tank level measurement

Level, Temperature & Conductivity

Model 3001 Levelogger® 5 LTC

Features

• Logs water level, temperature and conductivity

• Combines a datalogger, 8-year battery, Hastelloy® pressure sensor, temperature detector, and conductivity sensor

• 22 mm x 208 mm small waterproof housing

• Baked-on coating using polymerization technology protects the body against corrosion, abrasion and high temperatures

• Conductivity sensor is a 4-electrode platinum sensor, with auto ranging capabilities

• Simple to clean and calibrate, even in the field

• Memory for 100,000 sets of data

• Single-eye optical for easy cleaning and more reliable, faster communication

• Stronger, robust design: double O-ring seals for two times over pressurization rating

• Better thermistor and conductivity sensitivity: upgraded platinum RTD and conductivity sensor

• Biofoul Screen sold separately (SO-110659)

Applications

• Salt water intrusion and soil salination monitoring

• Plume remediation monitoring and studies

• Leachate monitoring at landfills, mine tailings, waste disposal storage sites and more

• Agricultural and stormwater runoff monitoring

• Create a historical database for potable water supply monitoring

• Tracer tests

Calibration Equipment

5,000µS/cm Conductivity Calibration Solution, 500 ml

12,880µS/cm Conductivity Calibration Solution, 500 ml

80,000µS/cm Conductivity Calibration Solution, 500 ml

Solinst® Rainlogger 5 Setup

For Direct PC Communication:

You can communicate with a Rainlogger 5 using a Desktop reader 5 or Field Reader 5 and PC or laptop; or a L5 Direct Read Cable with a PC Interface Cable connected to a laptop in the field.

For In-Field Communication:

A DataGrabber 5 can be used to transfer data from a Rainlogger 5 to a USB flash drive key. A Levelogger® 5 App Interface creates a Bluetooth® connection between the Rainlogger 5 and your smart device running the Solinst Levelogger App, for programming, and e-mailing data.

For Standard Deployment:

The Rainlogger 5 comes with a Connector Cable, 2 m (6.5 ft.) in length. The Connector Cable has two wires, which are connected to the tippingbucket cable. For most tipping-bucket models, the wires can be connected to either terminal. Refer to the manufacturer’s operating instructions.

For Telemetry Option:

To integrate the Rainlogger 5 into a Solinst® Telemetry System, the Connector Cable connects the Rainlogger 5 to the tipping bucket and a short L5 Direct Read Cable or Adaptor connects to the optical end of the Rainlogger 5. The L5 Direct Read Cable connects to an STS, RRL, or LevelSender Telemetry Reader Cable, which is attached to a Remote Telemetry Station.

Model 3002 Rainlogger 5

Features

• Inexpensive datalogger designed to record the tips of a standard tippingbucket rain gauge

• Compact and durable field unit that offers long-term reliability

• Low maintenance with 10-year battery

• Sampling is event based as the Rainlogger 5 records and saves each tip of the tipping-bucket as it happens

• Single-eye optical for easy cleaning and more reliable, faster communication

• ABS housing provides excellent ESD (electrostatic discharge) protection

• Memory for up to 100, 000-time stamped readings

• Compatible with Solinst Telemetry Systems

Applications

• Measuring local precipitation

• Determining peak rainfall events

• Stormwater management

• Remote monitoring of watersheds

• Ideal for correlating precipitation events to:

- Groundwater and surface water data

- Watershed and drainage basin studies

- Agricultural and forestry studies

Part Number Description

SO-114622

3002 Rainlogger 5 Comes With Connection Cable

How to communicate with your PC For Solinst® Levelogger® 5 Accessories?

Connect your datalogger to a computer using either the Desktop Reader 5 or Field Reader 5. If you have installed your Levelogger® using wireline/ Kevlar cord, you can communicate with your Levelogger® via a Desktop Reader 5 or Field Reader 5 and Levelogger® Software on a laptop PC. Always plug in the USB device before starting the Software.

When a Solinst datalogger is deployed for extended periods, especially in coastal and saltwater environments, there is the risk of biofouling. Biofouling on the pressure sensor or conductivity cell can compromise the reliability of the readings.

The Model 3001 Biofoul Screen is an affordable option to lengthen the time a Levelogger® 5, Levelogger® 5 Junior, Levelogger® 5 LTC, LevelVent 5, or AquaVent 5 can be deployed before maintenance is required.

The Biofoul Screen simply slips onto the sensor end of the datalogger, where it is held in place by compression fit. It improves the long-term performance of Solinst® dataloggers, and helps ensure reliable conductivity and pressure measurements.

Part

SO-114404

SO-114403

SO-110659

SO-109352

SO-109547

SO-109396

SO-109400

SO-112350

SO-109517

SO-110609

3001 Desktop Reader USB Assembly

3001 Field Reader 5 Assembly

3001/3500 Biofoul Screen For Levelogger®/Aquavent

3001 Cases For Levelogger® (10/Pack)

3001/3500 Cases For Levelogger® LTC/Aquavent (10/Pack)

3001 Cases For Levelogger® Junior (10/Pack)

3001 Alignment Pins For Levelogger® Series (10/Pack)

3001 Sealed Artesian Connector Assembly For Levelogger® Series

3001 Direct Read Cable Surface Caps (10/Pack)

3001 Black Top Caps For Levelogger® Series (10/Pack)

SO-110862 O-ring Set (CS V016 – Green) (10/Pack)

SO-108864 O-ring Set (V006) (10/Pack)

Desktop Reader 5

What is the Biofoul Screen used for?

Field Reader 5

Levelogger® Well Caps

The Model 3001 Levelogger® Well Cap Assembly is designed to fit 2” wells (or 4” wells with an Adaptor), and provides options for installing Leveloggers with wireline, Kevlar cord or using a Direct Read Cable.

Features

• Vented to equalize atmospheric pressure in the well

• Supports up to two Leveloggers

• Lockable, secure installation

• Eyebolt provides sturdy tie off

• Use a 3/8” Allen/hex key to remove the extra plug for additional monitoring access

• One design provides multiple equipment support

Part Number Description

SO-110099

3001 Well Cap Assembly 2" For Levelogger®

SO-110235 Well Cap Adaptor 4" For Levelogger®

SO-112764 3500 9500 Support Hanger Bracket (Spare) For Aquavent and LevelSender

Standard 2" Locking Well Cap with dust plugs - Top View

Well Cap with Single Levelogger Direct Read Cable Installed (two additional access holes available for monitoring)

Locking Well Cap

Bottom View shows eyebolt used to secure pumps and Leveloggers

Well Cap with Two Levelogger Direct Read Cables Installed (one additional access hole available for monitoring)

Standard 2" Locking Well Cap (Fits Nominal 2" PVC Pipe)

Well caps can be permanently secured to the well casing using screws and the cap securely locked using a 3/8” (9.5 mm) shackle diameter lock.

Installing Leveloggers Using A Stainless-Steel Wireline Or Kevlar Cord Suspension

The water level dataloggers are securely supported when tied off to the eyebolt included on the underside of the well cap insert.

Installing Leveloggers using a Direct Read Cable

Cable simply fits inside the well cap insert hole, when the red dust cap is removed.

Where a Barologger is intended to be installed in the same well, the well cap supports up to two Direct Read Cables. Even with two Direct Read Cables installed, there is still an access hole available for manual water level measurements or groundwater sampling, without disturbing the down-hold Levelogger.

Standard 2" Locking Well Cap with 4" Well Adaptor (Fits Nominal 4" PVC Pipe)

Solinst® Levelogger® 5 Deployment Options

L5 Direct Read Cable

• Direct connection from Levelogger® to surface

• Program and retrieve data with disturbing logger

• View real-time readings (ideal for pump tests)

• Connect to Levelogger® 5 App Interface, SRU, DataGrabber 5, and Telemetry

Wireline or Kevlar Cord

• Program and set in place for long-term monitoring

• Retrieve and download data

• Inexpensive

• Flexibility for sites where vandalism is an issue

If a datalogger is deployed in the field using a L5 Direct Read Cable, a PC Interface Cable connects to the L5 Direct Read Cable for communication with the PC—no need to remove the datalogger from the well.

Direct Read Cable Deployment Options

Part Number Description

Direct Read Communication

SO-109609

SO-106985

SO-115133

3001 / 3250 PC Interface Cable (USB) For Levelogger®/Levelvent

3001 Direct Read PC Interface Cable Mk3 (RS232/460ft-140m limit) For Levelogger®

3001 SDI-12 Interface Cable For Levelogger® (15 ft length) With Ferrules

SO-109752 3001 SC1000 Direct Read Cable Reel Assembly (MKII) For Levelogger® Direct Read Cable Assemblies

SO-114832

3001 L5 Direct Read Cable (5ft) For Levelogger® 5

SO-114833 3001 L5 Direct Read Cable (15ft) For Levelogger® 5

SO-114834 3001 L5 Direct Read Cable (50ft) For Levelogger® 5

SO-114835 3001 L5 Direct Read Cable (100ft) For Levelogger® 5

*Custom lengths also available

Standard Cable Deployment Options

Part Number Description

SS Cable Assemblies (Comes With Pair Of Hooks & Spool)

SO-102401 3001 SS Cable Assembly & Hooks (50ft) For Levelogger®

SO-102402 3001 SS Cable Assembly & Hooks (100ft) For Levelogger®

SO-102403 3001 SS Cable Assembly & Hooks (200ft) For Levelogger®

SO-102404 3001 SS Cable Assembly & Hooks (300ft) For Levelogger®

SO-102405 3001 SS Cable Assembly & Hooks (500ft) For Levelogger® SO-106191 3001 Spare Wireline Hooks For Levelogger® (2/Pack)

Kevlar Cord Assemblies (Comes With Spool)

SO-108963 3001 Kevlar Cord Assembly (50ft) For Levelogger®

SO-108965 3001 Kevlar Cord Assembly (100ft) For Levelogger®

SO-108967 3001 Kevlar Cord Assembly (200ft) For Levelogger®

SO-108968 3001 Kevlar Cord Assembly (300ft) For Levelogger®

SO-108969 3001 Kevlar Cord Assembly (500ft) For Levelogger®

Portable Data Transfer Device

Readout Unit (SRU)

Features

• In-field device designed to take and display instant water level readings from a deployed Solinst Datalogger

• Connects to a Levelogger®’s L5 Direct Read Cable/ Adaptor or LevelVent/AquaVent 5 Wellhead

• Clear LCD screen for viewing readings and setting up real-time logging

• It has an internal barometer which provides the option of showing and saving real-time water level readings corrected to ambient air pressure

• Internal Barometer accuracy: ± 0.2 kPa

• Real-time logging and data download does not interrupt running datalogger

• Useful when conducting aquifer tests

• Quick way to check the status of a deployed datalogger

• Uses one replaceable 9V battery and lasts up to two years

• IP64 dust and splash resistant

• Memory: 20 full LTC logs or 18 full LT logs (~1.8 million LTC readings or 2.7 million LT readings)

Part Number Description

Levelogger® 5 App Interface For Apple & Android

Features

• The Solinst® Levelogger® App is designed to communicate with Solinst® dataloggers using the Bluetooth® enabled Levelogger App Interface

• Lightweight, compact design and is easily transported – ideal for field use

• Makes data collection very efficient

• Eliminates the need to bring a laptop to the field

• Program and start dataloggers right in the field

• View real-time readings, or download and e-mail logged data files

• 4 x 1.5V AA lithium batteries

• Slip fit adaptors allows you to directly connect your Levelogger® to the Levelogger® 5 App Interface

• Compatible with Levelogger® 5 Series dataloggers, LevelVent 5 and AquaVent 5

• Requires either a Direct Read Cable, a LevelVent 5 Vented Cable Well Head Assembly, an Aquavent 5 Vented Cable Well Head Assembly or a DR to Optical Adaptor (Slip-Fit Adaptor Assembly Part # SO-114598), all sold seperately.

Operation

1. Download the Solinst® Levelogger® App on your Apple/Android device. The App is available free on the App Store/Google Play

2. Connect the Levelogger® 5 App Interface to the top end of your Levelogger®’s Direct Read Cable or Adaptor, LevelVent Wellhead, or AquaVent Wellhead Connector Cable, and turn it on

3. Enable Bluetooth® on your smart device and pair the Levelogger® 5 App Interface to your device

4. Launch the Solinst® Levelogger® App, and connect to your datalogger

5. When you are finished communicating with your datalogger, disconnect the App Interface, and connect to a datalogger at your next monitoring location. The App Interface is not intended for dedicated applications

Part Number Description

SO-115009

SO-114598

3001/3500 Levelogger® 5 App Interface For Apple & Android

3001 Levelogger® 5 Slip-Fit Adaptor Assembly

SO-115115

4001 Solinst® Readout Unit (SRU)

Model 3001 DataGrabber 5 Mk2 For Use with Model 3001/3002/3250/3500

Features

• Inexpensive and very portable option for Solinst® dataloggers users to download data directly to a USB flash drive

• Comes with a 2 BG USB flash drive key with a second connection for a USB-C device

• One push button to download data

• Compatible with most USB flash drive keys, including USB 3.0

• Connects to a Levelogger’s L5 Direct Read Cable/ Adaptor or LevelVent/AquaVent 5 Wellhead

• 9V replaceable alkaline or lithium battery

• LED light to indicate operation

• Data transfer does not interrupt running datalogger

• Battery life up to 60 full datalogger downloads @21ºC (alkaline)

• Size: ø 45.7 mm x 99.3 mm (ø 1.80" x 3.91")

Part Number Description

SO-116507 3001 DataGrabber 5 Mk2

Model 3250 LevelVent 5 Water Level Datalogger

The Solinst® LevelVent 5 is a vented version of the popular Levelogger®. The highly accurate datalogger is designed to record water level and temperature measurements during shallow groundwater and surface water deployments.

Features

• Corrosion and abrasion-resistant coating baked on using polymerization technology

• Gauged pressure sensor for highly-accurate water level measurements: 0.05% FS

• Compact wellhead makes deployment simple using a Solinst 2" Well Cap Assembly

• Communication cables and accessories connect directly to the wellhead

• Long-lasting battery included in logger

• Built-in hydrophobic filters and desiccants – no need to replace, reduces maintenance

• Memory for up to 150,000 data logs

• Continuous, reliable water level data for long term monitoring projects

• No barometric compensation required, saving data processing time

• Instant water level data for real-time aquifer test results

Application

• Ideal for shallow deployment: up to 20 m (65 ft) submergence

• Aquifer characterization: pumping tests, slug tests, etc.

• Stream gauging, lake, reservoir and dam management

• Watershed, drainage basin and recharge monitoring

• Stormwater and runoff monitoring

• Water supply and tank level measurement

• Long-term water level monitoring in wells and surface water

Model 3500 AquaVent 5 Water Level Logger

Features

• Records accurate water level and temperature measurements in shallow groundwater and surface water applications

• Corrosion and abrasion-resistant coating baked-on using polymerization technology

• Gauged pressure sensor for highly-accurate water level measurements: 0.05% FS

• Multiple built-in hydrophobic filters and desiccants — no need to replace, reduces maintenance

• Easy-to-access, user-replaceable batteries in Wellhead

• Options for MODBUS (RS-232/RS-485) and SDI-12

• Separate cables for each communication protocol

• Memory for up to 150,000 data logs

• Automatic barometric compensation reduces time for required for post data processing

• Integrate into a third-party data collection system for remote real-time data

• Continuous reliable water level data for long-term monitoring projects

• Actual water level readings for instant aquifer test results

Application

• Ideal for shallow applications: up to 20 m submergence

• Aquifer characterization: pumping tests, slug tests, etc.

• Stream gauging, lake and reservoir management

• Watershed, drainage basin and recharge monitoring

• Storm water and run off monitoring

• Long-term water level monitoring in wells and surface water

Inf

Z ne

LevelVent 5

The Major Differences

• Wellhead appearance

• Material: Black Delrin, 316 Stainless Steel, Viton

• Dimensions: 1.2" x3" (30 mm x 76 mm)

• Batteries: None

• Protocol Connections: Solinst

Between the LevelVent 5 and AquaVent 5

VS

AquaVent 5 SPX

• Wellhead appearance

• Material: Black Delrin, 316 Stainless Steel, Viton, Polypropylene, Polyamide

• Dimensions: 4.0" x 5.5" (102 mm x 140 mm)

• Batteries: Four (4) 1.5V AA Li

• Protocol Connections: Solinst, MODBUS, SDI-12

Is it important to have a compact Wellhead that can easily be deployed and hidden in a 2" Well Cap Assembly?

If yes, the Model 3250 LevelVent 5 would be the preferred option.

Is it necessary to be able to communicate with third party dataloggers or telemetry systems using either MODBUS or SDI-12 protocols?

If yes, the Aquavent 5 SPX Wellhead is needed.

How do communications cables and accessories connect with these Vented units?

In the case of the LevelVent 5, they connect directly to the Wellhead, which is identical to the top of a Solinst® Levelogger® 5 Direct Read Cable. The AquaVent 5 has unique cables that are provided with the Wellhead to connect from the Wellhead to accessories and third party dataloggers or telemetry systems.

What batteries are needed for both systems?

The LevelVent 5 logger contains a long-lasting lithium battery that is not user-replaceable. There are no batteries to replace in the Wellhead. The AquaVent 5 primarily uses four 1.5V user-replaceable lithium batteries, which are located in the Wellhead. The logger itself contains a small battery that is used to maintain the internal clock when it is not connected to the Wellhead (it is not user-replaceable).

Model 3500 AquaVent 5 Communication Wellhead

Features

• Fits conveniently onto a 2" (50 mm) well casing using the well cap base (a 4" well adaptor is available)

• The SPX Wellhead has a connection for communicating with Solinst® software and accessories, and a second connection for communicating with third party dataloggers or telemetry systems using MODBUS (RS-232/RS-485) or SDI-12 protocols

• 4 x 1.5V AA lithium replaceable batteries

Part Number Description

SO-115306 3500 SPX Wellhead For AquaVent 5

3500 AquaVent 5 Wellhead Communication Cables

There are multiple ways to communicate with the AquaVent; convenient Wellhead Cables are available for each option.

Part Number Description Standard SP Wellhead Cables (15ft) With 10 Pin Connector

SO-111644 3500 App/DataGrabber Connector Cable (10pin/15ft) For AquaVent SP

SO-111640 3500 USB Connector Cable (10pin/15ft) For AquaVent Standard SPX Wellhead Cables (15ft) with 12pin Connector

SO-111647 3500 SDI-12 Connector Cable (12pin/15ft) For AquaVent

SO-111645 3500 RS232 Connector Cable (12pin/15ft) For AquaVent

SO-111646 3500 RS485 Connector Cable (12pin/15ft) For AquaVent

Model 3250 LevelVent 5 / 3500 AquaVent 5

Vented Cable Assemblies

Features

• Vented cables contain power and communication wires, as well as a vent tube running the length of the cable

• Vented cables provide direct read communication from the LevelVent 5 / AquaVent 5 logger to the Wellhead

• The vent tube and wires are jacketed in polyurethane, providing durability and protection

Part Number Description

SO-112769

SO-112771

SO-112773

SO-111014

SO-112779

*Custom lengths also available

3500 / 3250 Vented Cable Assembly (5ft) For AquaVent / LevelVent

3500 / 3250 Vented Cable Assembly (15ft) For AquaVent / LevelVent

3500 / 3250 Vented Cable Assembly (25ft) For AquaVent / LevelVent

3500 / 3250 Vented Cable Assembly (50ft) For AquaVent / LevelVent

3500 / 3250 Vented Cable Assembly (100ft) For AquaVent / LevelVent

Model 3250 LevelVent 5 / 3500 AquaVent 5 Vented Datalogger Accessories

SO-109547

SO-112643

SO-112644

SO-112645

3001/3500 Cases for Levelogger® LTC Levelogger®/AquaVent (10/Pack)

3500 Black Top Cap For AquaVent Edge (10/Pack)

3500 Black Dust Caps For Vented Cable (10/Pack)

3500 Dust Cap for AquaVent Cable (Set of 10)

SO-108293 O Ring Set V012 - 10pcs (Black)

SO-110659

SO-112649

SO-112764

SO-112767

3001/3500 Biofoul Screen For Levelogger®/AquaVent

3250/3500 Vented Cable Blowout Fitting For AquaVent

3500 9500 Support Hanger Bracket (Spare) For AquaVent & LevelSender

3500 9500 Well Cap Assembly (2") For AquaVent & LevelSender

SO-110235 Well Cap Adaptor (4") For Levelogger®

Key Differences Between The Three Telemetry Systems

1. Why use Telemetry Systems?

Telemetry systems offer cost savings, flexibility and easy access to remote monitoring locations.

2. What are the key differences between the three Telemetry System models? STS

• LTE digital cellular

• Small to large networks

• Control your own telemetry systems over the web

• Set alarm notification

• Solinst SIM Card option

RRL

• Short-distance radio

• Small closed loop networks

• Interchangeable stations (ideal for re-configuring your network)

• Compact, all-in-one units

LevelSender 5

• 4G cellular communication

• Compact design fits inside 2" well

• Data sent by email or SMS

• FTP data transfer option

• Set alarm notifications

• Built-in barometer

• Solinst SIM Card option

Need Help Choosing The LevelSender 5 Telemetry For Your Leveloggers®?

Answer the following questions to help narrow it down.

1. How many well locations do you want to monitor remotely?

One LevelSender will be required per Levelogger®/monitoring location and one Reader Cable & Direct Read Cable per Levelogger®/ Barologger.

2. Are you currently using Barologgers?

If yes, one Splitter (SO-109700) is needed for each location using a Levelogger® and a Barologger in the same well

3. What are your well diameters?

The LevelSender 5 fits easily in a 2" well using the 2" OD Well Cap Assembly and Support Hanger Bracket that are included with each LevelSender 5. A 4” OD Well Cap Adaptor is also available as an added accessory.

4. How many projects/telemetry networks will you have?

One USB-C Programming Cable is recommended for each project/”Home Station” location. A USB-C Programming Cable is required to communicate with the “Home Station” PC and LevelSender Software.

5. Would you like a built-in SIM card with your LevelSender unit?

If you already have LevelSenders, just a SIM card is an option (SO-116048). Advantages of the Solinst SIM card and data plan are:

Model 9500 LevelSender 5

The LevelSender 5 is a simple, low cost system designed to wirelessly send data from Solinst dataloggers in the field, via cellular communication, to multiple emails and an SMS recipient. You can receive data right on your smart device.

Features

• Sized to fit inside a standard 2" well casing

• Internal barometer for automatic water level compensation

• Connection for up to two dataloggers on each device

• Remote data sent via email, SMS messaging or FTP

• Database is automatically updated with each new data report

• Free LevelSender Software for full user control and data management

• Easy programming of independent datalogger recording

• Issue remote diagnostic commands via email from the Home Station

• Set high- or low-level alarm notifications

• Ready-to-go option with pre-programmed

• SIM card; simplified, more reliable service provider connection

• FTP (File Transfer Protocol) option for data transfer

• Extensive coverage with cellular communication

• Receive data on your smart device and PC

• Remotely monitor battery level and status with each report

• Power Supply: 3 x AA 1.5V replaceable lithium batteries

• Memory Capacity (Between Reports): Up to 40,000 LT logs, or 28,000 LTC logs

• Size: 2.5" x 9.375" (with antenna folded down)

• Compatible Dataloggers: Levelogger® 5 Series dataloggers, LevelVent 5, as well as previous versions of the LevelVent and Levelogger® Edge Series dataloggers

• Internal Barometer Range: 30 kPa – 120 kPa

• Internal Barometer Accuracy: ±0.2 kPa (2 cm)

Part Number

SO-115924

Description

9500 LevelSender 5 Telemetry System - 4G Comes With SIM Card, 2” Well Cap & Hanger Bracket Model 9500 Communication Cables

SO-112867

SO-115378

Model 9500 Accessories

SO-109700

SO-112764

SO-112767

SO-110235

9500 Reader Cable For LevelSender (3ft)

9500 USB-C Programming Cable For LevelSender 5

9200 9500 Logger Connection Y-Splitter For RRL Gold & LevelSender

3500 9500 Support Hanger Bracket (Spare) For AquaVent & LevelSender

3500 9500 Well Cap Assembly (2") For AquaVent & LevelSender

Well Cap Adaptor (4") For Levelogger®

Model 9100 STS Telemetry Systems

The LevelSender 5 is a simple, low cost system designed to wirelessly send data from Solinst® dataloggers in the field, via cellular communication, to multiple emails and an SMS recipient. You can receive data right on your smart device.

Features

• Designed for use with Solinst high quality dataloggers

• Uses 4G LTE cellular modem, the STS sends water level, temperature, conductivity and rainfall data from the field to a Home Station PC

• STS Remote Stations can be powered by a sealed lead-acid 12V battery, and optionally, solar trickle charging or direct AC power

• Up to 4 Solinst® Dataloggers can be connected to one STS

• Intuitive software for easy programming and setup

• IP communication for reliable data transfer

• Simplified, more reliable service provider connection using a Solinst® SIM card

• Database to import to your own website or list

• Allows barometric compensation of remote water level data

• Remote schedule and firmware updates from the Home Station

• Battery level and status updates with each report

• GPS module in remote STS allows location mapping in Solinst Telemetry Software

• High- or low-level alarm notifications

Applications

• Remote or difficult to access locations

• Hazardous or critically important sites

• Long-term groundwater monitoring applications

• Drought and water taking management

• Watershed management

• Landfill and mine water supervision

• Flood and storm water management

Part Number

SO-114231

SO-114232

SO-108854

SO-108999

SO-113534

Description

9100 STS Telemetry System - LTE (North America - LTE Bands: B2, B4, B5, B12, B13)

9100 STS Telemetry System - LTE (EMEA / APAC - LTE Bands: B1, B3, B7, B8, B20)

9100 Reader Cable For STS (15ft) (1yr Warr.)

9100 Optional Antenna For STS (1yr Warr.)

9100 External Power Assy. For STS (Spare) (1yr Warr.)

Telemetry Overview

1. What is the difference between the STS Edge Telemetry System – GSM Modem (SO-113385) and the STS Edge Telemetry Assembly with Cables (SO-113517)? SO-113385 – complete system with the STS Edge controller/distribution box, modem, connection cables, and enclosure SO-113517

– special distributor package that comes only with the STS Edge controller/ distribution box, connection cables. Enclosure and modem are sourced separately Note: Note: Solinst does not provide batteries for either of the options listed above. Batteries must be sourced locally. Specifications for the battery are: 12V, 12-30 AHr deep cycle, rechargeable sealed lead-acid battery.

• 15 ft. Reader Cable (SO-108854) per datalogger

• Direct Read Cable of required length, per Levelogger®

• Software – SO-108747 to purchase, or free download

2. What optional accessories are available for the STS Edge Telemetry System?

• External Power Assembly (SO-113534) for connecting user-supplied external power, e.g. solar panel, battery charger, etc.

• Optical Reader to program Leveloggers® individually (SO-110149)

• PC Interface Cable Assembly (SO-109609) to allow checking of Leveloggers® and Direct Read Cables in the field, and programming LevelVent dataloggers

Model 9200 Remote Radio Link Telemetry (RRL)

The Solinst® RRL System offers a very simple and inexpensive method of local telemetry. Data is sent from the field via short distance radio to your Home Station PC. The RRL is excellent for small, closed loop networks such as mine sites, golf courses, and landfill monitoring networks.

Features

• RRL Stations work with omnidirectional antenna, therefore can communicate over distances up to 30 km

• RRL Stations use a 900 MHz radio module

• Six replaceable lithium batteries and option of a back-up power source

• Up to four Solinst Dataloggers can be connected to one RRL (using two Splitters)

• Size: fits in a 4.5" diameter well

• IP Rating: IP66 (dust and water proof, cannot be submerged)

Part Number Description

SO-109326

SO-109428

SO-106811

SO-109482

SO-109720

SO-109452

SO-109700

9200 RRL Gold - 900MHz (1yr Warr.) (Up To 4 Loggers)

9200 Reader Cable For RRL Gold (15ft) (1yr Warr.)

9200 Serial Programming Cable RRL Gold

9200 Battery Pack (spare, 3 sets of 2AA) For RRL Gold (1yr Warr.)

9200 External Power Cable Assy (AC Power - NA) For RRL Gold Comes With 15ft (1yr Warr.)

9200 Optional Solar / 12V Cable Assy For RRL Gold (1yr Warr.)

9200 9500 Logger Connection Y-Splitter For RRL Gold & LevelSender

What are the three RRL Stations?

All RRL Stations use the same hardware and are programmed using a wizard in the Solinst Telemetry Software as a Home Station, Remote Station or Relay Station. They are interchangeable as required.

Home Station:

Each RRL Network will have one Home Station. The Home Station is connected to a PC using an RS232 cable and requires an external power supply, as well as the internal batteries, to operate. Note: The RRL Home Station and Relay Stations require an external power supply, as well as the internal batteries.

Note: You can connect your RRL Home Station to a remote STS Edge Telemetry System instead of a PC.

Relay Station:

When a Remote Station cannot communicate to the Home Station directly, due to distance or line-of-sight issues, a Relay Station can be used to transmit the data. Data from attached datalogger is stored at a Relay Station. However, with no dataloggers attached, data is not stored, it is only re-transmitted. The radio at a Relay Station is always on, therefore a continuous external power supply is required, in addition to the internal batteries.

Remote Station:

The Remote Station will turn the radio module on and off based on the Report Rate scheduled. The Remote Station does not require an external power supply, unless there is a frequent Report Rate programmed.

Porcelain Enamel Standard Staff Gauge

The Staff Gauge has a long history of providing a direct visual indicator for determining water level. Stevens staff gauges are designed for easy mounting to a wall or pier, with heavy metal grommets and a 0.188 inch opening for screws or nails. Each gauge consists of a metal core, coated with porcelain enamel and marked with accurate measurement markings at specific intervals. The metal core is heavy 16-gauge (0.075 in / 1.9 mm) iron, which is completely covered with a baked-on porcelain enamel finish to resist rust or discoloration. Different colors of enamel are used to provide the markings; typically, black numbers on a white background. Stevens staff gauges are designed for years of trouble-free use, and can be easily cleaned.

Staff Gauge Applications

• Rivers, lakes, streams, dams and reservoirs

• Wastewater treatment plants

• Flumes and weirs

• Visual flow measurement

• Tanks

Style A Staff Gauge

Features

• Style A comes in sections, each 4 inches wide and 3.33 feet in height

• Graduation marks every 1, 1/10 and 0.02 feet with total elevations

• Multiple sections may be stacked for a total measurement height of 13.33 feet

Style C Staff Gauge

ST-15415 0 to 3.33 ft Each

ST-15395 3.33 to 6.66 ft Each

ST-15396 6.66 to 10.0 ft Each

ST-15397 10.0 to 13.33 ft Each

ST-15398 13.33 to 16.66 ft Each

Features

• Style C comes in standard sections, each 2.5 inches wide and 3.33 feet in height

• Graduation marks every 1/100th foot and numerical marks are printed every foot and tenth foot

• Multiple sections may be stacked for a total measurement height of 20 feet

ST-15402 0 to 1.06 ft Each ST-15403 0 to 1.56 ft Each ST-15404 0 2.06 ft Each

ST-15418 0 to 3.06 ft Each

ST-15419 3.06 to 5.06 ft Each

ST-43082 0 to 4.06 ft Each

ST-15405 0 to 3.33 ft Each

ST-15406 3.33 to 6.66 ft Each

ST-15407 6.66 to 10.00 ft Each

ST-15408 10.00 to 13.33 ft Each

ST-15409 13.33 to 16.66 ft Each

ST-15410 16.66 to 20.00 ft Each

ST-15411 20.00 to 23.33 ft Each

ST-15412 23.33 to 26.66 ft Each

ST-15413 26.66 to 30.00 ft Each

ST-15414 30.00 to 33.33 ft Each

ST-14509 33.33 to 36.66 ft Each

ST-14510 36.66 to 40.00 ft Each

ST-14511 40.00 to 43.33 ft Each

Style I Staff Gauge

Features

• Style I comes in standard sections, each 2.5 inches wide

• Graduation marks every 0.25 inches and numerical marks are printed every inch

ST-90223 0" to 14.0" Each

ST-44405 0" to 18.0" Each

ST-44406 0" to 24.0" Each

ST-44407 0" to 30.0" Each

ST-45637 0" to 36.0" Each

ST-45480 0" to 48.0" Each

Custom Staff Gauge

Style M Staff Gauge Style E Staff Gauge

Features

• Style E comes in sections, each 3.5 inches wide

• Graduation marks every tenth of a foot

• Style E is not numbered, so figure plates are available for applications that require numbers

Figure Plates

Features

Features

• Style M is sold in one size, 65mm wide by 1 meter tall

• Marked in metric units, with graduation marks every centimeter and numbering every decimeter

• Custom levels may be marked by using figure plates

• Commonly used with Style E or Style M staff gages and are fastened to a pier or wall to mark custom elevations

Custom staff gauges can also be designed. They can be individually designed for large size, slopes or flow measurements or for other unique mounting angles that an off-the-shelf staff gauge cannot measure.

Swoffer Model 2100 Current Velocity Meter

Features

• Read stream velocity directly from 0.5 to 25 feet per second

• Velocity displayed in either feet or meters per second

• Three selectable pre-set display update times. 90 second maximum

• Powered by a single standard 9V battery

• Uses the efficient, propeller-driven Photo-Fiber-Optic sensor pioneered by Swoffer in the 1970’s

• Precision quartz crystal-controlled electronics provides accurate, precise data in all flow conditions

Includes

• Two 9V batteries

• Two Complete Rotor Assemblies (SW-2100-A21)

• Spare Propeller

• 2100 Digital Indicator with a neck strap and a sensor / cable assembly (SW-2100-A22)

• Sensor wands are shipped in a PVC tube which serves as a permanent carrying/storage case

Part Number

SW-2100-TSR-Kit

Description

Current Velocity Meter adapts to your USGS Top-Set wading rod

SW-2100-STDX Current Velocity Meter & 2.5 ft. – 9.5 ft. Telescoping Wand

SW-2100-LX Current Velocity Meter & 4.5 ft. – 19.5 ft. Telescoping Wand

SW-2100-12

SW-2100-13

SW-2100-14

Current Velocity Meter & 2.7 ft. Top Set Wading Rod

Current Velocity Meter & 3.7 ft. Top Set Wading Rod

Current Velocity Meter & 4.7 ft. Top Set Wading Rod

SW-2100-C80 Current Velocity Meter & 80cm Top Set Wading Rod

SW-2100-C140 Current Velocity Meter & 140cm Top Set Wading Rod

SW-2100-1514

Current Velocity Meter & 12 ft. Combination Wading Rod

SW-2100-1518 Current Velocity Meter & 4 m Combination Wading Rod

SW-P-1450 Pelican 1450® Waterproof Polypropylene Carrying Case (ID 15" x 10.5" x 6")

SW-P-1200 Pelican 1200® Waterproof Polypropylene Carrying Case

Swoffer Model 3000 Current Velocity Meter-Flowmeter

The Model 3000 Indicator is a datalogging version of the Model 2100, allowing the operator to input and store measurement data that is usually written by hand.

Features

• Read stream velocity directly from 0.5 to 25 feet per second in Velocity mode

• Records depths, widths, velocities, flow angles, time/date (“stations”) in "Discharge" mode

• Memory holds 1000 “stations” in up to 100 cross sections for later upload to a PC

• Calculates discharge

• Velocity sampling interval is user selectable from 1 to 999 seconds

• Calibration ratings for 10 different sensor options are stored and can be edited

• Powered by four AA size batteries

• Designed to function with price type AA and Pygmy meters with or without optic sensors

• Can be easily field-calibrated to operate with any contact closure type sensor

Includes

• Four AA Alkaline batteries

• Two Complete Rotor Assemblies (SW-2100-A21)

• Spare Propeller

• 3000 Datalogging Indicator with a neck strap and hands-free harness

• DB9 style serial cable and a sensor wand w/ cable assembly (SW-2100-A22)

• Sensor wands are shipped in a PVC tube which serves as a permanent carrying/ storage case

Part Number Description

SW-3000-TSR-Kit*

SW-3000-STDX

SW-3000-LX

SW-3000-12

SW-3000-13

SW-3000-14

SW-3000-C80

SW-3000-C140

SW-3000-1514

SW-3000-1518

Flowmeter / Datalogger adapts to your USGS Top-Set Wading Rod

Flowmeter / Datalogger & 2.5. – 9.5 ft. Telescoping Wand

Flowmeter / Datalogger & 4.5 ft. – 19.5 ft. Telescoping Wand

Flowmeter / Datalogger & 2.7. ft Top Set Wading Rod

Flowmeter / Datalogger & 3.7 ft. Top Set Wading Rod

Flowmeter / Datalogger & 4.7 ft. Top Set Wading Rod

Flowmeter / Datalogger & 80cm Top Set Wading Rod

Flowmeter / Datalogger & 140cm Top Set Wading Rod

Flowmeter / Datalogger & 12 ft. Combination Wading Rod

Flowmeter / Datalogger & 4 m Combination Wading Rod

SW-P-1450 Pelican 1450® Waterproof Polypropylene Carrying Case (ID 15" x 10.5" x 6")

SW-P-1200

Pelican 1200® Waterproof Polypropylene Carrying Case (ID 9.5" x 7.5" x 4.5")

*Please note SW-3000-TSR-Kit does not include wand

Options & Accessories For Swoffer Models 2100 & 3000

Part Number Description

SW-2100-151G Extra 1" diameter lengths for the 2100-1514 / 3000-1514 wands, graduated in feet & tenths

SW-2100-151M Extra 1" diameter lengths for the 2100-1518 / 3000-1518 metric wands with 5 cm graduations

SW-2100-151 Extra lengths for the 2100-1514 & 1518 / 3100-1514 & 1518 with no graduations

SW-2100-151-Top-Cap Threads to top of any -151 series rod. Comes with pointer for flow direction indication

SW-2100-151-Slider Allows 2100 propeller sensor to be used on any 1" diameter rod. The same as that supplied with the 2100-1514 / 1518 & 3000-1514 / 1518. Can also be modified to fit ¾" galvanized iron pipe.

SW-2100-151-Foot 2.5"diameter aluminum plate attaches to the bottom sections of -151 wands. Comes with stainless steel bolt and lock washer for installation

SW-2100-TSR-Adapter

Acetal resin plastic adapter for using the 2100 propeller sensor on a USGS Top-Set Wading Rod. The 2100-TSR adapter directly replaces the original "slider" of the USGS wading rod allowing the Swoffer sensor assembly to be removed and installed as needed This is the same part as supplied with the 2100-TSR-KIT / 3000-TSR-KIT

SW-2100-160* Stainless steel & 6061 T6 anodized aluminum adapter for using the Model 2100 sensor with a cable suspension system. An articulated assembly with 5″ fins allows sensor to point into the stream flow. Uses the same stainless flat bar material as Price AA meter cable suspension.

SW-P-1200 Pelican 1200® Waterproof Polypropylene Carrying Case (ID 9.5" x 7.5" x 4.5")

Digital Handheld Water Velocity Meters

Flow Probes – FP111, FP211 and FP311

The FP111, FP211 and FP311 Flow Probes are highly accurate water velocity instruments for measuring flows in open channels and partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow measurements.

Features

• Records 30 data sets, and readings are in feet or meters per second

• Telescoping handles ranging from 3 feet to 14 feet

• Rain-proof digital computer and display with 5-year shelf life

• Light weight, rugged and reliable

Applications

• Stormwater runoff studies

• Sewer flow measurements

• Measuring flows in rivers and streams

• Monitoring water velocity in ditches and canals

Averaging True digital running average, updated once per second

Display LCD, Glare, and UV Protected Control 4 button

Datalogger

30 sets, MIN, MAX, and AVG

Features Timer, Low battery warning

Sensor Type

Protected Turbo-Prop propeller with magnetic pickup

Materials Probe: PVC and anodized aluminum with stainless steel water bearing Computer: ABS/Polycarbonate housing with polyester overlay

Power Internal Lithium Battery, approx. 5 years life with typical use, non-replaceable

Auto Shutoff

After 5 minutes of inactivity

Operating Temperature -4 °F to 158 °F (-20 °C to 70 °C)

Storage Temperature -22 °F to 176 °F (-30 °C to 80 °C)

Carrying Case

The Flow Probe is shipped in a carrying case

Certificates CE

*Please note Swoffer does not supply the cable, reels, or weights required for operation

Accessory Kit For Flow Probe Models FP111, FP211,

& FP211-S Only

Flow Probe Alignment Fin Kit

Significant errors can occur when measuring water flow other than directly parallel to the direction of flow. The Global Water Flow Probe Alignment Fin is designed to help orient the flow probe parallel to flow when the end of the probe can't be seen well due to the depth or cloudiness of the water. To use this accessory, immerse the flow probe and rotate it back and forth until the least amount of resistance is felt due to the water flowing past the alignment fin.

Kolor Kut Water Finding Paste

The Kolor Kut Water Finding Paste is a golden brown in color and turns brilliant red upon contact with water. This product will successfully gauge water content in all petroleum and hydrocarbons as well as sulfuric acid, ammonia, soap solutions, salt and other chloride solutions.

YSI-BA2010 Flow Probe Alignment Fin Kit (1) Alignment fin (1) Set of mounting hardware Part Number

Kut Water Finding Paste, 3 oz Tube (1) Alignment fin (1) Set of mounting hardware

Kolor Kut Gasoline Gauging Paste

The Kolor Kut Gasoline Gauging Paste is a light pink in color and turns red upon contact with gasoline, diesel, naphtha, kerosene, gas oil, crude oil, jet fuels, and other hydrocarbons. A most effective product level indicator. Store at temperature range of 35° F to 115° F for preservation of product.

Kolor Kut Gasoline Gauging Paste, 2.25 oz Jar (1) Alignment fin (1) Set of mounting hardware

How To Use The Kolor Kut Water Finding Paste & Gasoline Gauging Paste?

Place a thin film of either paste on a clean gauge line or rod approximately where water or gasoline level is expected to appear. Lower the tape into the tank until the bottom is reached. Level will spear by positive contrast of colors. Instantaneous in gasoline, diesel, kerosene and gas oils. Heavy oils require a few seconds.

Our Departments

Remediation Technology

Solutions for the collection and treatment of floating hydracarbons and more

Filtration Technology

From

PureSample

Your one stop shop for all your environmental sampling and monitoring needs

Enviro Rentals

Equipment for your projects