2021 Australian Karting Manual

Page 187

Chapter 6 Scrutineering and Technical Conformity

1) Prior to leaving the in-grid / scales area after each session they will check all Seals, Identification Tag, Barcode and/or Marking’s for loss, damage or illegibility. 1. Any such loss, damage or illegibility must be reported to the Chief Scrutineer immediately. d) In the event of a Competitors Disqualification from a Meeting or part thereof due to noncompliance on the grounds of safety, they are not permitted to protest or appeal the decision. e) Inspections take the following forms: (i) Scrutineering (Safety Compliance and Administrative Checks) 1) Are to ensure a Kart and Driver compete on Track in a condition that provides for their and other competitors safety under all Competition situations. 2) Are to provide officials with administrative information in regard to all aspects of a Competitors entry in a Class. (ii) Technical Conformity Tests 1) Are to ensure all aspects of the Kart and Drivers performance is within the Rules of KA as they specifically relate to the particular Class entered. 2

Scrutineering a) May be carried out by either of the following authorised persons: (i) The Chief Scrutineer or their delegate; or (ii) The Competitor b) Prior to a Competition, their complete Kart, or a replacement component, being allowed to take part in the relevant Class Competition: (i) Scrutineering must be conducted by an authorised person.

© Australian Karting Association Ltd. All use subject to Conditions of Use at www.karting.net.au

185

Technical Rules

General a) To ensure compliance with all Rules, KA will carry out inspections. b) KA reserves the right to: (i) Carry out these inspections at any time and on any item. (ii) Apply any Seal, Identification Tag, Barcode and/or Marking at any time on any item. (iii) Add to the inspection procedures contained within the Rules at any time. (iv) Alter the inspection procedures contained within the Rules at any time. c) By entering a KA sanctioned meeting the Competitor implicitly states: (i) They accept the governance of KA in regard to all Rules. (ii) They will comply with all Rules at all times throughout the Meeting. (iii) Their Kart and Apparel conforms to all applicable Rules. (iv) They make any item, and/or themselves available for inspection at any time. (v) They will comply with all Official instructions within the time allocated for compliance. (vi) The responsibility for safety with all items is theirs. (vii) They will not use compliance with a prior inspection as defence in relation to noncompliance in a current inspection. (viii) They will not tamper with and will maintain the integrity of all Seals, identification Tags, barcode and/or Markings at all times

Chapter 6

1


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

INDEX

11min
pages 320-330

Past National Executive Members

2min
pages 318-319

Life Members

1min
page 317

APPENDIX-6 State Trophy - 4SS

3min
pages 312-313

APPENDIX-5 Dealer Trade Rules

4min
pages 310-311

APPENDIX-4 Introduction to Karting

9min
pages 306-309

CHAPTER 22 Speedway Karting

20min
pages 283-294

APPENDIX-2 Teams Competition Guidelines

12min
pages 299-303

CHAPTER 23 Dirt Track Karting

1min
page 295

CHAPTER 21 4SE (4 Stroke Endurance) Karting

21min
pages 272-282

APPENDIX-3 Private Practice Rules

4min
pages 304-305

CHAPTER 20 4SS (4 Stroke Sprint) Karting

10min
pages 266-271

CHAPTER 19 Vintage Karting

12min
pages 261-265

CHAPTER 18 Yamaha

4min
pages 257-260

CHAPTER 17 Open Performance

4min
pages 254-256

CHAPTER 16 KZ2

3min
pages 251-253

CHAPTER 15 KA1

2min
pages 248-250

CHAPTER 14 DD2

2min
pages 245-247

CHAPTER 13 TaG 125

4min
pages 241-244

CHAPTER 11 Rotax 125

3min
pages 234-236

CHAPTER 12 TaG 125 Restricted

5min
pages 237-240

CHAPTER 10 X30

2min
pages 231-233

CHAPTER 8 Junior Max

2min
pages 225-227

CHAPTER 7 Junior Performance

3min
pages 221-224

CHAPTER 9 KA2

3min
pages 228-230

CHAPTER 6 KA3

3min
pages 218-220

CHAPTER 5 KA4

3min
pages 215-217

CHAPTER 3 Cadet 12

2min
pages 211-212

CHAPTER 6 Scrutineering and Technical Conformity

8min
pages 187-190

CHAPTER 2 MicroMax

3min
pages 208-210

CHAPTER 4 MiniMax

2min
pages 213-214

CHAPTER 1 Cadet 9

5min
pages 204-207

CHAPTER 5 Noise Control

4min
pages 185-186
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.