(iii) Muffler 1) In accordance with the Homologation e) Ignition (i) Must be an analogue type which is CIK-FIA Homologated f) Cooling (i) In accordance with the Homologation and KA Technical Specifications g) Transmission (i) CIK-FIA Homologated h) Starter (i) In accordance with the Homologation i) Clutch (i) In accordance with the Homologation j) Fuel (i) Pump Fuel or (ii) Unleaded Racing Fuel 7
Chapter 16 Class Rules
Competition Tyres a) Dry - Prime (i) MG SM (Yellow Green) - Identified by Yellow Sticker and Green Barcode 1) Front Tyre size must be a. 10 x 4.60-5 2) Rear Tyre size must be a. 11 x 7.10-5 b) Dry – Option (i) MG FZ Yellow 1) Front Tyre size must be a. 10 x 4.60 - 5 2) Rear Tyre size must be a. 11 x 7.10 - 5 c) Wet (i) MG - SW, WT (White) 1) Front Tyre size must be a. 10 x 4.20-5 2) Rear Tyre size must be a. 11 x 6.00-5 d) For National Championship and Cup Meetings: From the commencement of the first qualifying session at a Meeting, only the following Tyres are permitted to be used during a Meeting unless otherwise advised in Supplementary Regulations: (i) two (2) sets of Dry Tyres; and (ii) two (2) sets of Wet Weather Tyres. e) For all other Competitions: From the commencement of the first qualifying session at a Meeting, only the following Tyres are permitted to be used during a Meeting unless otherwise advised in Supplementary Regulations: (i) one (1) set of Dry Tyres (plus one (1) replacement Tyre if permitted in accordance with the Rules); and (ii) one (1) set of Wet Weather Tyres (plus one (1) replacement Wet Weather Tyre if permitted in accordance with the Rules). f) Dry Tyres must be fitted with bead retention
252
© Australian Karting Association Ltd. All use subject to Conditions of Use at www.karting.net.au
