Energy Chains Powering cranes with energy chains Treotham Automation’s national sales manager, John Sharp, explains why energy chains are the best option for harnessing the power required in heavy duty industrial machines such as cranes.
T
HE new generations of shipto-shore cranes continue to demand more from their energy supply systems as the need for greater speed and reliability is amplified. igus, a manufacturer and supplier of a wide range of motion products such as cables, bearings and automation technology, has now introduced their heavy-duty energy chains in response to this need. According to igus partner, Treotham Automation, energy chains are used to carry and guide power to moving parts of machines or structures with the power coming from electrical, hydraulic, or pneumatic sources. “An energy chain is an engineered plastic chain with integrated rollers built into the sides of the link and you put the cables in that and it drags it backwards and forwards along with the trolley,” Treotham Automation national sales manager John Sharp said. In comparison to more traditional energy supply systems that are used in cranes, such as festoon systems, energy chains have become a more reliable and efficient option for crane operations.
42 APRIL 2022 Manufacturers’ Monthly
igus has introduced their new heavy-duty energy chains. “Many cranes come with this festoon system, which is basically a collection of cables which are hung from little skateboards, if you like, in loops,” Sharp said. “When the crane trolley moves, it drags the skateboards along and carries the cables. The cables pull the first trolley and then the sets behind get pulled along. However, the motion of all those cables is not synchronous with the motion of the trolley, and that causes a lot of problems such as wear and tear. “But with a chain, as soon as the trolley moves, the chain moves so that the motion of the cables is synchronous with the trolley. That alone makes a big improvement in the wear and tear on all the components, because it doesn’t have the shock loadings of going from zero to speed.” Sharp describes the igus energy chain itself as a plastic compound reinforced with glass fibre nylons, with rollers built into the links to ensure the chain both slides and rolls. This creates very low wear compared with festoon systems. “We have a plastic chain where you put the cables inside it, you attach one end to the fixed part of
the machine at the other end of the trolley,” Sharp said. “It’s a system, so it’s not just the chain alone – we have a guide trough which is a critical element of the system and holds the chain at a straight level, parallel to the trolley motion, which allows the chain to follow the trolley.” With the igus range of energy chains, no two systems are identical because no two machines have the exact same cable package. The products are mass customisable, ensuring that they suit any crane operator’s needs in relation to size, the travel length of the machine, speed, and acceleration. “From day one, we select the chain which is going to be strong enough to carry the push and pull of the motion,” Sharp said. “As far as detailing the rest of the chain, that’s really individual. This creates two selection criteria: one is choosing the right series of products for the job, the other is tailoring the accessories inside the chain to suit your cable package.” The igus energy chains have opened the market due to their longer service life. This has been facilitated in several ways – for example, wind does not degrade the
cables over time as it would with a festoon system, Sharp explains. “The servicing needed is quite minor for the energy chains,” he said. “There are some ports in Australia that are quite exposed to wind. An interesting thing with a festoon is that even when the machine is off, the cable is still working because the wind is moving it. However, the issue is that the wind is degrading the cables and can actually blow the cable up onto the skateboard, eventually breaking the cable. So, the cable is suffering from wear and its lifespan is ticking the whole time because it’s moving the whole time. It’s also quite a big job to change that out, whereas with the chains the cables only move when the shuttle moves. “The other interesting point is when you have a festoon, you have a loop, so all the bending is done at the bottom of the loop. The loop moves up and then it bends in the same spot; whereas with the chain, you’re putting that bend along its entire length. So, there’s a few fundamental things which make it live longer.” In turn, a longer service life for the energy chains means that maintenance is simplified overall – a huge benefit for the long-term costs manmonthly.com.au
