FEATURE Protection 30 Bearing
Are your bearings protected? With the ever-present drive to reduce energy use for both environmental and financial benefits, a growing number of pumping systems are employing variable frequency drives. However, their addition can cause issues elsewhere in the systems. Bearing protection specialist, AEGIS, explains how shaft grounding rings can overcome these issues, allowing the benefits of variable frequency drive use to be realised and costly downtime to be reduced.
P
umps and pumping systems account for 25% of the energy consumed by electric motors in the United States. In pumping-intensive industries, this number is over 50%. And similar figures are seen elsewhere in the world. To improve the efficiency of pumping systems and reduce their energy consumption, pump users are turning to variable speed or variable frequency drives (VFDs). Since most pumping systems are designed for maximum service conditions (capacity and differential head), running them at partial load can save considerable energy. So, by precisely matching motor speed to pumping requirements, VFDs can reduce energy costs by as much as 30% or more. However, while solving one problem, VFD’s can present another. VFD-induced voltage on motor shafts can discharge through motor
Quarter 3 2021
bearings, causing pitting, frosting, fluting, and total bearing failure in as little as three months. THE NEED FOR SHAFT GROUNDING Pump motor failures can cost hundreds of thousands to millions of dollars in repairs and lost revenues and can endanger public
Shaft grounding rings protect pump motors and the pumps themselves from VFD-induced bearing damage. health and safety. So, to ensure the reliability of VFD-driven pump motors and systems, bearing protection is needed. Shaft grounding rings, such as those supplied by AEGIS, ensure the reliable, long-term operation of VFD-driven pumping systems by
dissipating shaft voltage before it discharges through the bearings. When installed according to AEGIS’ best practices, shaft grounding rings protect pump motors and the pumps themselves from VFD-induced bearing damage and costly downtime. CASE STUDY When a large midwestern US recreational centre experienced bearing fluting damage to several pump motors, the facility’s manager realised that he needed to install bearing protection on the centre’s VFD-driven motors. Not sure what product to use, he decided to conduct a head-tohead test on two technologies – common mode chokes and AEGIS shaft grounding rings. One motor was replaced with a new 7.5 HP 213 T-frame LEESON motor, and common mode chokes were added. A shaft voltage test measured over 10V – still high enough to cause EDM damage.
www.bpma.org.uk
