PRODUCTS
PROTRANS HD
The latest development in brake pads for commercial vehicles by Bendix Bendix has released its latest development in high performance brake pads. Bendix PROTRANS HD Brake Pads are designed and engineered to combat the extreme pressures that heavy duty vehicles are exposed to on a daily basis and are specially engineered to meet Australia’s demanding conditions. The development of the PROTRANSHD revolves around a special advanced heavy-duty formulation designed to cope with the high temperatures related to constant braking and GMV loading which requires a higher performance brake pad. This in turn addresses a major issue in fleets of multi-purpose pad’s wear rate. Employing the highest levels of technology designed to meet the world’s stringent safety and compliance regulations, premium quality friction materials are essential with electronics controlling many aspects of the modern heavy vehicle such as engine, transmission and brakes. The range meets ECE-R90 regulations (where homologated) and is FE rated (J661).
PLATINUM GASKETS Available from Australian Automotive Parts (AAP) AAP says Platinum Gaskets was built on an uncompromising commitment to use the highest quality materials offered throughout the world. All gaskets carry a three-year/100,000km warranty for peace of mind. Platinum Gaskets reportedly pursues the philosophy of “adding value to customers with quality,” and has won the praise of customers in Australia and abroad with high-quality products and services Leaks of engine oil, coolant and transmission fluid, to name a few, are problematic. These not only cause unsightly stains but may lead to serious problems if not repaired. Platinum Gaskets says that is why it provides leak free repair gaskets that are designed for the repair environment; with proprietary materials, installation aids and proven technologies helping to ensure a reliable seal on “even the most troublesome applications.” Platinum Gaskets says its range differs from other gasket brands on offer, which includes; • Head gaskets manufactured in high-grade graphite material with stainless steel bore bindings or MLS (multi layered steel), which ever is applicable to each particular engine. • Rocker cover gaskets which are all manufactured in silicone material, allowing
mechanical stability over a broad temperature range to ensure sealing integrity. • Valve stem oil seals which are of Viton material. • Engine oil seals which are genuine NOK seals. • A wide range of non-asbestos gasket materials, in a variety of sheet sizes and thicknesses. Not only are valve regrind and full gasket sets available, there are manifold gaskets, oil pan sets, valve cover gaskets and kits, timing case seal sets, turbocharger gaskets, along with a large range of miscellaneous gaskets and seals including valve stem oil seals, valve cover bolt seals, spark plug tube seals, exhaust flange gaskets, thermostat gaskets and water pump gaskets to suit a large range of engines. To complement the gaskets, an extensive range of cylinder head bolt sets are also available. The Platinum Gasket range is complemented with a very informative, comprehensive easy to read catalogue and the entire range is listed on Oscar along with images of each item. For more information, visit www.australianautomotiveparts.com.au
COOLDRIVE LOCKS TIGHT WITH LOCTITE Leading adhesives, sealants and surface treatments brands joins CoolDrive The ECE Regulation 90 (ECE-R90) specifies the design, construction, performance requirements and test protocols to strict European regulation. ECE R90 calls for brake pads to be tested for braking capabilities, speed sensitivity, cold performance and may only deviate from the frictional characteristics of their original equipment counterparts by no more that 15 percent. The comprehensive new PROTRANS HD range from Bendix covers the most popular heavy commercial vehicle applications and is now available from leading Bendix stockists offering OE quality, low pad wear and come with hardware included in the pack ready to fit. For more information, free call the Bendix Brake Advice Centre on 1800 819 666 or +61 3 5327 0211 from overseas (8am-5pm Monday to Friday EST), e-mail brakeadvicecentre@bendix.com.au or visit www.bendix.com.au 32
Australian Automotive Aftermarket Magazine October 2021
CoolDrive Auto Parts says it has again secured a top tier supplier for customers in the automotive aftermarket, with Loctite products now available on the shelves at local CoolDrive branches. CoolDrive Auto Parts says Loctite has long been considered as the world’s leading brand for adhesives, sealants and surface treatments, combining decades of experience and breakthrough technology to be “the go-to brand in any workshop.” Headlining the range at CoolDrive are Loctite’s Threadlocker adhesives, which can be used in a wide range of applications, from delicate fuel injection components to heavy-duty transmission and engine assemblies. Also available are the Loctite Thread Sealants which seal and secure metal pipes and fittings, filling the space between threaded metal parts. The Loctite Gasketing products offer precise and reliable sealing, delivering excellent fluid resistance and formulations for high operating
temperatures, high torque retention and sensorsafe characteristics, with a choice of anaerobic, RTV silicone or solvent-based products available. The Loctite Instant Adhesive range includes liquids, gels, pastes, aerosols and putties that are capable to meet any number of automotive applications, such as bonding trim, sealing weather-stripping, and repairing broken grilles. There is also a comprehensive retaining compound range with products to bond nonthreaded, cylindrical metal assemblies. Finally, there is the anti-seize and lubricating products to protect metal parts from corrosion, and a number of specialist tapes. For further information on the Loctite range at CoolDrive, or to find a branch, visit ishop.cooldrive.com.au
