Basic elements
Connecting alternating current power supply modules Connecting a single-rack PLC station Illustration:
Q: general section switch, KM: circuit contactor-breaker, (1) insulating connector bar for finding grounding faults (2) available current:
0.6 A with a TSX PSY 2600 (see Premium and Atrium using EcoStruxure™ Control Expert, Processors, racks and power supply modules, Implementation Manual) power supply module, 0.8 A with a TSX PSY 5500 (see Premium and Atrium using EcoStruxure™ Control Expert, Processors, racks and power supply modules, Implementation Manual) power supply module, 1.6 A with a TSX PSY 8500 (see Premium and Atrium using EcoStruxure™ Control Expert, Processors, racks and power supply modules, Implementation Manual) power supply module,
NOTE: Protective fuses: alternating current power supply modules TSX PSY 2600/5500/8500 are fitted during manufacture with a protective fuse. This fuse, in series with the L input, is located inside the module and cannot be accessed.
208
33002439 10/2019
