Safety Modules
General description of safety module Description The TSX PAY 262 can be used as part of safety functions: safety of machinery according to EN ISO 13849-1 functional safety of programmable electronic equipment according to IEC 61508
The TSX PAY 262 safety modules and their accessories TSX CPP 301/•02 and TELEFAST 2 ABE-7CPA13 are used to interrupt one or several category 0 safety or emergency stop control circuits (safety components) in complete safety. The entire safety system is compliant with European standards EN ISO 13850 for emergency stops and EN 60204-1 for safety circuits. These modules also comply with safety requirements regarding the electrical monitoring of position switches activated by protection devices. The TSX PAY 262 safety modules provide: A safety system designed to control the emergency stop circuits of machines in complete safety. The modules are equipped with a wired logic safety block for monitoring emergency stops. Full diagnostics of the safety system readable from the status of the position switches and pushbuttons of the emergency stop input sequence, the reactivation input, the feedback loop, the control of both output circuits, and the safety system power supply status. All this information is sent to the PLC’s CPU in the form of 28-bit Discrete inputs. NOTE: The PLC has no effect on the safety modules, and the safety system section is connected to an external power supply.
244
33002439 10/2019
