Brownells - November 2015-2016

Page 16

YANKEE HILL AR-15

GAS BLOCKS & TUBES

bolts & carriers

AR-15/m16

6.8mm SPC BOLT/CARRIER GROUP

DPMS AR-15

A.R.M.S. AR-15/M16

GAS SYSTEM KIT

#41-BL SILHOUETTE FOLDING FRONT SIGHT

Drop-In Ready For Smooth, Long-Lasting, Reliable Operation Complete bolt/carrier assembly for the AR-platform rifles chambered in 6.8mm Remington SPC is drop in ready – just check the headspace and you’re ready to shoot. Constructed of durable 8620 steel alloy for a long service life, the group is crafted to milspec tolerances for ultra-reliable operation in nearly any weather or environmental condition. Chrome-lined carrier recess is easy to clean and resists carbon build-up to ensure super-smooth bolt movement. a b SPECS: 8620 steel, phosphatized, matte black finish. Fits mil-spec AR-15 rifles chambered for 6.8 Remington SPC. #100-010-697EN 6.8 SPC Bolt/Carrier Group, ​ 9A189F99 ����������������������������������������������� $ 199.99

JP ENTERPRISES AR-15/M16/AR-STYLE .308

Ruggedness & Appearance Of Standard Sight; Folds Down When Not Needed Critical Replacement Parts To Keep Your AR-15 Functioning The essential parts you need to repair and maintain rifle and carbine gas systems. Ideal for emergency repairs, or use to build a new rifle. Includes gas tube, roll pin, bolt carrier key and screws, plus three gas rings. Mid-Length Gas Tube – Use when modifying a rifle or carbine for a mid-length gas system or for repairing an existing mid-length installation. Includes tube only. Retain the rifle’s existing roll pin, carrier key, screws, and gas rings. a b SPECS: Stainless steel gas tube and gas rings. Remaining parts steel, black, 3 matte finish. Mid-Length Gas Tube – 11 /4" (29.9cm) long. #231-000-045EN Rifle Gas System Kit, ​1C22D00 ������������ $ 29.99 #231-000-046EN Carbine Gas System Kit, ​1C23C15 ������ 29.99 #231-000-244EN Mid-Length Gas Tube, Only, ​ 1C11B99 ������������������������������������������������������ 13.29

ENHANCED GAS RINGS Fights Carbon Fouling & Helps Maintain Reliability

SPIKE’S TACTICAL AR-15/M16

JP’s one-piece gas ring combines a superb gas seal with a very low-friction relationship between rings and bolt carrier. Decreased resistance between rings and carrier results in a direct increase in the rifle’s reliability. In addition, the ring’s precision-ground surface is contoured to use the cycling action itself to scrape the walls of the carrier, so it combats carbon buildup with every shot. Ideal for use on the JP EnhancedBolt™. JPGR-223 fits bolts on rifles chambered in .223/5.56mm NATO. JPGR-308 fits rifles chambered in .308 Win/7.62mm NATO. a b #452-000-170EN JPGR-223 Gas Rings, ​2E8G70 ���������������� $ 9.99 #452-000-169EN JPGR-308 Gas Rings, ​2E8F70 ���������������� 9.99

DOUBLE STAR AR-15

PISTOL-LENGTH GAS TUBE The Right Tube For Your AR Pistol Or SBR Build Short gas tube is made specifically for AR pistols. Fits currently available 61/4" to 71/2" pistol barrels. Also a handy alternative for really short carbine barrels where a standard carbine-length tube is too long. a b SPECS: Stainless steel, natural finish. 63/4" long. #100-008-042EN Pistol-Length AR Gas Tube, ​2Z10Q36 ������������������������������������������������������ $ 12.99

LES BAER AR-15/M16

GAS TUBE Precision-Made Carbine Gas Tube Hardened stainless steel gas tube resists heat and corrosion and ensures consistent gas flow to help your rifle cycle properly. Precise construction helps ensure quality for custom rifle builds. Vent hole size is optimized for semi-auto AR-15 operation. a b SPECS: Stainless steel, natural finish. 93/4" (25cm) long. For use on rifles with carbine-length gas systems. #124-000-004EN Les Baer Carbine Gas Tube, ​ 4B12K49 ���������������������������������������������������� $ 14.99

14

PAGE

Integral gas block and folding front sight replicates the appearance of the classic factory front sight tower, yet folds neatly out of the way when it’s not needed. Eliminates need to purchase a railed gas block and a separate rail-mount folding sight. Deploys and locks securely in place as quickly as any flip-up combat sight. To fold, press straight down on the top of the diagonal rear support to release the lock and pull back on the sight tower. Standard A2-type sight post, so it works with any factory-height rear sight. Easy to install; dual clamping rings fit standard .750" diameter barrels, and hex-head bolts (hex wrench included) provide plenty of clamping force to make sure the sight doesn’t shift and change point of aim. Steel base/gas block provides exceptional resistance to erosion by hot gases. Includes bayonet lug, and rear clamping ring drilled to accept sling swivel pin. Aluminum tower minimizes weight without sacrificing strength. a b SPECS: Steel and aluminum, matte black finish. Fits barrels that are .750" O.D. at the gas port. #100-003-742EN #41-BL Silhouette Folding Front Sight, ​3A147M50 �������������������������������������$ 154.99

GAS TUBES

AR-15/M16

LOW-PROFILE GAS BLOCK Lightweight, Minimal Profile To Fit Under Tactical Handguards & Free-Float Tubes Low-profile gas block fits under just about any extended handguard while ensuring proper gas flow to keep your rifle cycling reliably. Precision machined from lightweight, yet tough, 6061 T6 aluminum, so it won’t add unwanted forward weight. Slide over the barrel and anchor in position by tightening the three, flush-mounted steel hex screws on the underside to ensure it won’t shift even under sustained full-auto fire. For installations where the gas block is exposed, rounded edges give a “melted” profile that won’t snag on foliage or other gear. Hardcoat anodized for additional strength and resistance to surface wear; matte black finish blends with most factory gun finishes. a b SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. In¬cludes (3) hex-head screws and instructions. .750" - Fits barrel with .750" O.D. at gas port. 1.25" (3.2cm) long, 1.35" (3.4cm) overall height, .95" (2.4cm) outside width. .8 oz. (23g) weight. .936" - Fits barrel with .936" (2.38cm) O.D. at gas port. 1.25" long, 1.5" (3.8cm) overall height, 1.15" (2.9cm) outside width. 1 oz. (28g) weight. #080-000-528EN .750" Gas Block, ​8K25B00 ���������������������$ 34.99 #080-000-700EN .936" Gas Block, ​8K29J99 ��������������������� 39.99

BADGER ORDNANCE AR-15/M16 Melonite Coated For Extra Heat Resistance & Elimination Of Light Reflection Melonite coating on hardened stainless steel gas tubes gives extra heat- and corrosion-resistance for an exceptionally long service life. Matte black finish enhances the tactical profile of rifles with open handguards by eliminating a source of accidental light reflection. Includes gas tube roll pin. a b SPECS: 304 stainless steel, Melonite coated, matte black. Available in Pistol, Carbine, Mid- Length, and Rifle lengths. #100-008-576EN Melonite-Coated Gas Tube, Pistol, ​3B13K41 ������������������������������������� $ 16.00 #100-008-577EN Melonite-Coated Gas Tube, 16.00 Carbine, ​3B13G41 ��������������������������������� #100-008-578EN Melonite-Coated Gas Tube, 16.00 Mid-Length, ​3B13J41 ��������������������������� #100-008-579EN Melonite-Coated Gas Tube, 16.00 Rifle, ​3B13D41 ���������������������������������������

ULTRA LOW PROFILE GAS BLOCK Provides Maximum Clearance For Optics Or Free-Float Handguards

MODULAR GAS BLOCK

Slim replacement for factory gas block provides maximum clearance for optics and free-float handguards. Setscrews, gas tube mounting pin, and installation instructions included. Mk 12 is an exact copy of the gas manifold on the Mk12 Mod 1 and Mk 18 Mod 1 Special Purpose Rifles used by the U.S. Army and Navy. Made from 416 stainless steel with a tough, wear-resistant black oxide finish, and fits barrels with .750" O.D. Mk 12 Style has the same appearance as the Mk12 Mod 1 gas manifold, and fits barrels with .875" O.D. a b SPECS: 416 stainless steel. Mk 12 fits .750" (19mm) O.D. barrels. Black finish. 1" (25.4mm) long, 7/8" (22.2mm) wide, 17/16" (36.5cm) high. Mk 12 Style fits .875" (22.2mm) O.D. barrels. Natural silver finish. 1" (25.4mm) long, 1" wide, 17/16" high. #093-000-026EN Mk 12 Gas Block, ​3K53I73 ���������������������� $ 65.00 #093-000-027EN Mk 12-Style Gas Block, ​3K59B07 �������� 69.00

WMD GUNS AR-15/M16

NITROMET GAS TUBE

Bravo Company

AR-15/ M16/M4

LOW-PROFILE GAS BLOCK Heavy Duty Low Profile Block Fits Under Most Handguards

Special Coating Gives Extra Resistance To Heat & Corrosion Stainless steel gas tubes are salt bath nitrocarburized for extra resistance to heat and corrosion. Nitromet finish gives added durability with a surface hardness of Rc 55. Installs easily and available for carbine and mid-length gas systems. a b SPECS: Mil Spec 304 stainless steel, matte black Nitromet finish. Carbine – 93/4" (24cm) long. Mid-Length – 113/4" (30cm) long. #100-010-978EN Nitromet Carbine Gas Tube, ​ 3C15M00 �����������������������������������������������������$ 16.99 #100-010-979EN Nitromet Mid-Length Gas Tube, ​ 3C15B00 ����������������������������������������������������� 16.99 #100-011-964EN Nitromet Rifle Gas Tube, ​ 3C15H57 ����������������������������������������������������� 17.99

Designed to fit AR-15 and M16 barrels, the BCM low-profile gas block is machined from high quality steel to Mil-Spec tolerances. Gas block includes set screws for mounting and a phosphate finish for corrosion and wear resistance. Available with either .625" or .750" inside diameter. a b SPECS: Machined steel, phosphate finish. 1.34" high, (3.4cm), 1" long (2.5cm). Includes set screws for mounting. #100-014-215EN Low-Profile Gas Block, .750", ​ 1E41N72 ������������������������������������������������������ $ 44.99 #100-014-216EN Low-Profile Gas Block, .625", ​ 1E41M72 ���������������������������������������������������� 44.99

SATISFACTION GUARANTEED

SINCE 1939

AR-15/M16 Unique, Modular Design For Ultimate Customization Easy-to-install gas block features an integral fixed rail and a modular design that allows fast installation and removal of up to three, additional Picatinny rails for mounting lasers, lights, night vision optics, back-up sights, and a variety of other tactical accessories. Side and bottom rails attach easily with two screws, so you can configure the unit for each mission’s requirements. Precision-machined from rugged, 6061 billet aluminum for superior strength without weighing down your weapon. Mounts securely to barrel with three, hardened steel setscrews. a b SPECS: Aluminum, matte black, hardcoat anodized finish. Fits standard .750" (19mm) dia. barrels. Gas Block - 17/8" (4.8cm) long, 1" (2.5cm) wide, 17/16" (3.6cm) high. Gas Block Kit – Includes modular gas block with three add-on rails. 17/8" long, 27/64" (5.3cm) wide, 2" (5.0cm) tall. #080-000-382EN Modular Gas Block, Only, ​8K29A06 �����������������������������������������������������$ 33.99 #080-000-383EN Modular Gas Block Rail, Per Each, ​ 8K10L98 ������������������������������������������������������ 13.99 #080-000-384EN Modular Gas Block Kit, ​8K44F62 ��������� 54.99 BAYONET LUG - Bolts directly to Modular Gas Block to allow installation of a milspec bayonet or lug-mounted bipod on your AR-15. Installs and removes easily with an Allen wrench so you can configure your rifle’s accessory package at any time to fit mission requirements. Precision machined from 4140 steel for optimal strength and rigidity. Includes mounting screws. Modular Gas Block not included. SPECS: Steel, matte black Parkerized finish. 25/16" (5.9cm) long, 1/2" (1.3cm) wide, 21/64" (8.3mm) tall. Allen wrench not included. #080-000-439EN Modular Gas Block Lug, ​8K9A99 �������� $ 14.99

Office/Tech: 641-623-5401


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Brownells - November 2015-2016

25min
pages 104-105

D #526-000-160eN LeupOLD MArK 2 iNTeGrAL MOuNTiNG sYsTeM See

1hr
pages 94-99

F #100-012-617eN MAGpuL MBus prO FrONT/reAr siGHT seT See

23min
pages 68-69

D #953-000-003eN AerO precisiON uLTrALiGHT scOpe MOuNT See

12min
page 93

K #100-002-987eN DANieL DeFeNse rAiL MOuNT QD sLiNG sWiveL See

9min
page 74

i #749-002-692eN siNcLAir Ar-15 siNGLe-sHOT FOLLOWer See

30min
pages 65-67

M #100-017-333eN MAGpuL pMAG® GeN M3 ™ See

22min
pages 63-64

O #100-007-570eN MAGpuL MOe+™ pisTOL Grip See

13min
page 59

K #573-000-078eN erGO Grips AMBiDeXTrOus sureGrip See

10min
page 58

G #100-011-895eN MiDWesT iNDusTries GeN2 ss HANDGuArD See

34min
pages 54-56

See

9min
page 50

A #100-002-947eN MAGpuL GeN ii prs sTOcK See

11min
page 48

A #100-016-337eN BrAvO cOMpANY BcM GuNFiGHTer sTOcK KiT See

44min
pages 44-47

A #100-016-825eN vLTOr iMOD BuTTsTOcK See Brownells.com. B #231-000-304eN DpMs Ar-308 sTOcK MOuNTiNG KiT See

10min
page 43

O #100-014-185eN BrAvO cOMpANY receiver eXTeNsiON AsseMBLY KiT See

8min
page 42

N #100-014-540eN cMMG Ar-308 GuNBuiLDer's LOWer rec'r pArTs KiT See

20min
pages 40-41

J #100-013-592eN HiperFire HiperTOucH 24 eLiTe TriGGer See

11min
page 31

J #100-007-543eN GeisseLe super DYNAMic sD-c TriGGer See

11min
page 30

See

10min
page 29

F #100-004-908eN MiDWesT iNDusTries LOW-prO sTeeL GAs BLOcK See

33min
pages 17-19

G #100-015-261eN siLeNcercO sAKer™ TriFecTA 7.62/.308 MuZZLe BrAKe See

11min
page 27

J #100-014-215eN BrAvO cOMpANY LOW-prOFiLe GAs BLOcK See K #100-016-493eN BrAvO cOMpANY GuNFiGHTer MOD 3 verTicAL Grip

10min
page 16

i #078-000-256eN Ar-308 BOLT/cArrier GrOup See

10min
page 13

G #152-000-130eN sureFire sF3p556/sOcOM FLAsH HiDer See

7min
page 28

See

11min
page 15

i #100-004-634eN DANieL DeFeNse cOMpLeTe BOLT/cArrier GrOup See J #100-014-008eN sureFire M600 scOuT LiGHT See Brownells.com.

10min
page 14

G #100-011-242eN BrAvO cOMpANY GuNFiGHTer cOMpeNsATOr See

19min
pages 25-26
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.