AR-15/m16
CROSSTAC CAR-15/M4
VLTOR AR-15/M16
TROY INDUSTRIES AR-15/M16
DANIEL DEFENSE AR-15/M16
AMBIDEXTROUS SINGLE-POINT SLING CONNECTOR
SINGLE ATTACHMENT SLING ENDPLATE
M4 END PLATE SLING MOUNT
RAIL MOUNT QD SLING SWIVEL
Ultra-Low Profile, Snag-Free Design Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from highquality steel, then Parkerized dark gray for wear resistance and a close match to factory rifle finishes. a b SPECS: Steel, black, matte, Parkerized finish. #100-003-181EN CAR-15/M4 Single-Point Sling Connector, 5A27D89 �������������������������������$ 29.99
MAGPUL AR-15/M16
ASAP® SLING ADAPTER Gives You A Major Tactical Advantage With 180° Of Unrestricted Sling Movement Ambidextrous Sling Attachment Point helps the operator adapt quickly to changing tactical situations by rapidly switching weapon from one shoulder to the other. An unrestricted 180° of sling movement lets you change shoulders to take maximum advantage of available cover, address targets around corners and other barriers, or shift weapon position if one arm is injured. Works with any single-point sling that attaches with a quick-release snap-hook, and fits any AR with an M4-type adjustable buttstock. Remove factory receiver end plate and replace with the ASAP; keep the original receiver extension, buttstock, and sling. a b SPECS: Steel, Parkerized, matte black. Fits both mil-spec and commercial/universal M4-type receiver extensions. #100-004-450EN ASAP Sling Adapter, 3K27K49 �������������� $ 29.99
SASE-1
SASE-2
SASE-2E
Unique Indexing Washer Allows Fast, Easy Installation For Right- Or Left-Hand Shooters Ambidextrous, all steel endplate provides secure, balanced single-point sling attachment, so your collapsible-stock rifle or carbine can be carried tangle-free in the ready position at all times. Special indexing washer with screw interfaces with the rear of the receiver to allow easy installation for right- or left-hand use. SASE-1 features a single slot that accepts conventional 11/4" wide webbing. SASE-2 has loop to accept HK-style hook or carabiner clips. SASE-2E has a larger loop to accommodate large HK-style hooks. a b SPECS: Steel, black, matte finish. 21/16" (5.2cm) long, 13/8" (3.5cm) wide, 1 /8" (3mm) thick. .7 oz. (20g) wt. Fits AR-15/M16/M4 and clones with collapsible stock. #100-003-184EN SASE-1 Slotted Endplate, 3A15J89 �������$ 18.99 #100-003-185EN SASE-2 HK-Style Endplate, 3A15H89 �� � 18.99 #100-009-339EN SASE-2E HK-Style Endplate, 3A15D89 � 18.99
BLUE FORCE GEAR AR-15/M16
RAIL MOUNT SLING LOOP Versatile, Low-Profile Forward Sling Mount Low-profile sling loop clamps to Picatinny handguard rail and provides a secure, versatile forward mounting point for a 1" sling. Precision machined from billet aluminum with rounded edges to prevent snagging on other gear. Fixed, non-pivoting design prevents rattles and unwanted sling shifting. a b SPECS: Aluminum, hardcoat anodized, black. Stainless steel crossbolt, black oxide finish. 1½" (3.8cm) long. .6 oz. (17g) wt. #100-005-192EN Rail Mount Sling Loop, 7A30B89 �������� $ 33.99
MIDWEST INDUSTRIES AR-15/M16
SLING ADAPTER Installs Easily; Choose Your Sling Position On Collapsible Stocks; Made In The U.S.A
slings & adapters
For Secure, Ambidextrous Attachment Of Slings With Pushbutton QD Swivels
Hard anodized, 6061 aluminum sling adapter clamps to collapsible stock buffer tubes with no need for special tools or to remove the buffer tube. Two models available: Loop for claw-type clasp; or Slot for conventional web slings. Adapters can be used with single-point, two-point, or three-point tactical slings and are ambidextrous for use with right- or left-hand operation. Does not interfere with normal operation of collapsible stock. a b SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required. #100-002-123EN Sling Adapter, Loop, 2A31D79 �������������� $ 35.99 2A32C49 ���������������� 36.99 #100-002-122EN Sling Adapter, Slot, END PLATE SLING ADAPTER - Ambidextrous, quickdetach sling swivel can be mounted on either side of the mounting plate on adjustable M4-type buttstocks so you can position your sling for optimum comfort and versatility. Hard coat anodized, 6061
72
PAGE
aluminum body with a matte black finish holds up to the toughest use and won’t crack or break over years of shooting. Won’t interfere with the operation of stock and works well with singlepoint, two-point, or three-point tactical slings. SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required. #100-002-613EN End Plate Sling Adapter QuickDetach, 2A34Q59 ������������������������������������ $ 42.99 MCTAR-30HD SLING ADAPTER - No gunsmithing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buffer tube. Includes 11/4", mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 aluminum body with a matte black finish is built to take extreme duty use without failure. Won’t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release feature to any single-point, two-point, or threepoint tactical sling. Made in the USA. SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required. #100-002-876EN MCTAR30HD Sling Adapter, 2A51D79 �� � $ 57.99
Replaces factory receiver end plate and provides secure, ambidextrous attachment for the pushbutton QD sling swivel. Made of hardened aluminum with extra metal at the stress points to ensure this mount won’t fail during hard use. Rounded edges resist snagging on sling or other gear. Hardcoat anodized for extra strength and wear resistance, with a matte black finish that matches most factory buffer tubes. Heavy-duty stainless steel swivel accepts slings up to 11/4" wide and allows a full 360° of rotation. a b SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel Stainless steel, matte black finish. Accepts slings up to 11/4" (3.2cm) wide. Fits M4-style carbines with adjustable buttstock. #100-004-383EN M4 Sling Mount, 3B43I29 ���������������������� $ 44.99
Helps Stabilize Weapon To Prevent Gun Roll Uniquely designed, quick-detach swivel mount limits rotational movement to help achieve optimum weapon balance and control with popular tactical slings. Attach anywhere along railed forearms; robust, aluminum clamping block with hex head cross-bolt locks mount securely to any Picatinny rail. Extra heavy-duty, steel, push-button swivel removes quickly, so operator can break-away from the sling in emergency situations. Can be mounted for right- or left-hand use and adapts to 2- and 3-point sling configurations. Swivel rotation is limited to approximately 45° to help stabilize the weapon and eliminate sling tangle. a b SPECS: 6061 T6 aluminum, Mil-Spec Type III, hardcoat anodized, black. 1 1 /4 (3.2cm) long, 1" (2.5cm) wide, 5/8" (1.6cm) high, 1 oz. (28g) wt. #100-002-987EN Rail Mount QD Sling Swivel, 8K39M99 ���������������������������������������������������� $ 39.99
COLT DEFENSE
USGI BARREL MOUNT SWIVEL
Size
The Same, Tactical Sling Mount Used By Our Armed Forces
IMPACT WEAPONS COMPONENTS
2-TO-1 POINT TRIGLIDE ADAPTER
This genuine, Colt factory part is the one used by our GI’s on the M4 carbine to allow attachment of M203 grenade launchers or forward mounted lights and lasers. Steel, two-piece unit clamps directly around the barrel between the barrel bands of the Mil-Spec front sight housing. Can be mounted at the right or left side of weapon and features a rubber-coated swivel to eliminate sling abrasion and noise. No modifications or gunsmithing required. Also fits AR 15/M16 rifles with conventional front sight housing. SPECS: Black, hardened steel. 9/16" (1.4cm) long, 111/16" (4.3cm) wide. Fits barrels .650" (16.5mm) to .750" (19.1mm) diameter. #160-000-352EN Tactical Front Sling Mount, 6A41D19 �� $ 44.99
Aluminum adapter threads on the rear strap of any 1" wide sling to quickly convert a 2-point sling into a highly maneuverable single-point sling, and back. “Universal” socket accepts any pushbutton QD sling swivel, HK-style clip, and MASH connectors – amazingly handy and easy to use. Instructions included. Separate models for 1" and 1¼" wide slings. a b SPECS: 6061 T6 aluminum, Type III hardcoat anodized, black. 27/32" (2.1cm) 1 long, 1 /2" (3.8cm) high. #100-006-831EN 1" Triglide Sling Adapter, 2C18G50 �����$ 19.99 100-007-208EN 1¼" Triglide Sling Adapter, 2C17E29 ��� 19.99
COMMAND ARMS AR-15/M16
KNS PRECISION AR-15/M16
PUSHBUTTON SLING SWIVEL
Converts Your 2-Point Sling To A Single-Point Sling
QUICK RELEASE SLING SWIVEL STUDS
For Secure, Quick-Detach Installation Of Extra-Wide Slings Extra-wide steel swivel accepts slings up to 15/8" wide for attachment to a Command Arms Modular Buttstock or similar component that accepts a standard push button swivel. Smoothoperating, centrally located button and polished ball-bearing locking mechanism ensure easy attachment. SPECS: Steel, black oxide finish. Accepts slings up to 15/8" wide. #100-004-881EN Pushbutton Sling Swivel, 6C9G89 ������� $ 11.99
Tough, Parkerized Finish, Greater Sling Attachment Options Swivel studs with cross drilled mounting holes allow vertical or side carry. Accepts Uncle Mike’s-style QD sling swivels (sold separately). Front swivel stud attaches to free float or A2-style detachable handguards. Requires drilling a single mounting hole in free float tubes. Rear QD sling stud replaces fixed military-type without modification to stock. a b SPECS: Steel, parkerized, dark gray finish. #923-000-027EN PK Front Swivel Stud, 3B12J89 ������������ $ 14.99 #923-000-028EN PK Rear Swivel Stud, 3B12B89 �������������� 14.99
FALCON INDUSTRIES AR-15/M16
RAIL SLING ADAPTER
UNCLE MIKE’S
Locks To Accessory Rail For Instant Sling Attachment
MIL-SPEC SWIVELS
Solid, one-piece aluminum mount with steel, pivot pin and swivel attaches to any Picatinny accessory rail for instant sling attachment. Nylon tip set screw locks mount to rail. Quiet, rubbercoated swivel prevents metal-to-metal slap and eliminates sling b wear at point of contact. Accepts slings up to 11/4" wide. a SPECS: Base - Aluminum. Swivel/Hardware - Steel. Matte black finish. 9/16" 1 5 (1.4cm) long, 1 /4" (3.2cm) wide, 1 /8" (4.1cm) high. Fits slings up to 11/4" wide. #573-000-034EN Rail Sling Adapter, 3G17Q09 �����������������$ 23.00
SATISFACTION GUARANTEED
SINCE 1939
Withstands The Toughest, Most Demanding Conditions Heavy duty, 11/4 inch swivels provide necessary stamina and durability for extended tactical and field use. 500 pounds of pull strength plus stainless steel construction that meets the weather resistance standards of the U.S. Military. SwivelLock® prevents accidental opening, provides fast attachment. SPECS: MIM 4600 stainless steel, matte finish. 11/4" loops. #593-000-002EN Mil-Spec Swivels, 7K16K49 ��������������������� $ 17.99
Office/Tech: 641-623-5401
