AMT OCT/NOV 2021

Page 12

010

FROM THE CEO SHANE INFANTI – Chief Executive Officer AMTIL

The people have backed manufacturing; what about the politicians? The Australian people have become increasingly conscious of the need for this country to have a robust local manufacturing base. We just need politicians to give it the support it deserves. Since the very start, the COVID-19 pandemic has been a wakeup call for Australia regarding our attitudes to manufacturing. From supermarket shelves stripped of toilet paper to the mad rush to establish local production of medical ventilators, we all got a clear lesson about the vulnerability of modern supply chains and the need for strong sovereign manufacturing capability, so that we have continued access to all the things we rely on as a society.

According to the AMGC data, manufacturing contributes more than $100bn to the local economy each year, amounting to 10% of gross domestic product (GDP). That’s significantly higher than the figure we often hear quoted – of 6%. The data also finds that manufacturing directly employs 1.27m Australians, 30% higher than official figures; in addition it creates 3.6 indirect roles elsewhere in the economy for every direct manufacturing role.

As the pandemic has dragged on, one of the few positives to come out of the crisis was the sense that there was at last widespread public recognition that manufacturing really matters.

The AMGC report is a vital piece of research. It highlights the crucial role played by manufacturing in the Australian economy. In fact, it reveals that our industry delivers even more value to the nation than we had previously believed. But most importantly, it shows that ordinary Australians realise more clearly than ever that manufacturing is a sector that Australia needs, and that we need to invest in making it stronger.

Now new research has corroborated this, putting real numbers on how far the popular mood has swung in support of our industry. The report from the Advanced Manufacturing Growth Centre (AMGC) reveals the general public’s current perception of Australian manufacturing and its understanding of this critical industry. Comparing data from early 2019 – before the pandemic – to today, the AMGC examined the contrasting levels of public awareness and the changing attitudes toward local manufacturing. It found that support today is significantly higher compared to pre-pandemic times. The study shows that manufacturing is held in high regard by the public, is seen as vital to our nation’s economy, and is critical to maintaining our high standards of living.

The question now is: are our politicians getting the message? Are they doing enough to support the industry?

Key findings from the report include:

To be fair, there are a lot of very good initiatives coming out of government at the moment. The Federal Government’s Modern Manufacturing Strategy contains a whole raft of measures that will deliver genuine benefits for manufacturing businesses. There are plenty of other worthwhile federal initiatives as well – the AMGC being one of them. And state governments also have lots of good policies in place to support the industry.

• 72% (+7% from 2019) of Australians believe manufacturing is important or very important to the economy.

But there endures a lingering sense that manufacturing remains a “second-order” priority among political circles.

• The number of respondents who believe manufacturing will get stronger in the coming years has doubled compared to responses in 2019.

Last month, Christian Porter’s resignation marked the departure of a seventh person to hold ministerial responsibility for industry in eight years of this Coalition Government. Porter followed Ian Macfarlane, Christopher Pyne, Greg Hunt, Arthur Sinodinos, Michaelia Cash and Karen Andrews, and spent a mere five months in the role. Obviously his departure could not be avoided, but the fact is the controversy that drove Porter from office had dogged him from the start. Moreover when he arrived in the job there was the distinct sense that he had been in some way “demoted”, handed a “less important” portfolio to allow him to deal with his personal issues.

• 79% of Australians perceive the trade and export of manufactured goods are important to the economy. • Tasmania, Northern Territory, South Australia, and Western Australia rate manufacturing more highly than the Eastern States. • The importance of manufacturing is rated more highly in regional areas, compared to metropolitan areas. • 69% (+6% from 2019) of Australians believe manufacturing is important to maintain our standard of living. • Manufacturing is perceived as the seventh-most important industry to the Australian economy relative to other industries. • The appreciation of manufacturing and its importance increases with age – for example, approximately 85% of Australians over 65 agree manufacturing is important to the local economy. • 80% of Australians believe it is important to purchase local products where possible. • 63% believe these products are of higher quality and 58% noted that locally made products were worth paying a premium for. • Almost half of the respondents view Australian manufacturing as high-tech and globally competitive.

AMT OCT/NOV 2021

At time of writing, Angus Taylor has been made Acting Minister for Industry, Science and Technology, while continuing to serve in the equally important role of Minister for Energy and Emissions Reduction. By the time you read this, Prime Minister Scott Morrison may have announced a longer-term replacement. But as things stand, it’s hard to escape the sense that our industry has essentially been left to fend for itself, at a time of when the sector is facing sigificant uncertainty on several fronts – from the recent dramatic overhaul of our submarines program, to the ongoing COVID-19 crisis. And all this with only a moonlighting resources minister watching over us from Canberra. Manufacturing deserves better – ask the Australian public. The full report from the AMGC can be downloaded here: www.amgc.org.au/wp-content/uploads/2021/09/AMGC-PublicPerceptions-Report-2021.pdf


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

MANUFACTURING HISTORY: A look back in time

5min
pages 120-122

AMTIL FORUMS

17min
pages 110-113

Manufacturing insights for all

4min
page 96

What makes a great Operations Manager?

9min
pages 102-103

Australia manufacturers: Apathetic, too busy or just fed up?

9min
pages 106-107

Eilbeck: Smooth commissioning with Applied’s support

5min
pages 100-101

Adarsh expands with Okuma machining centre

3min
page 99

New technology in a skills shortage

3min
page 97

Major time savings with ESPRIT CAM

4min
page 98

The new cybersecurity imperative in manufacturing

6min
pages 94-95

ZYGO Nexview 650 – Large-format inspection/metrology

2min
page 93

Tool presetters: the key to boosting quality & productivity

3min
page 92

Laserline: Welding copper with a diode laser

3min
pages 86-87

COMPANY FOCUS: Marsh Alliance – Springing into action

7min
pages 84-85

All types of solutions for Alltype Engineers

5min
pages 80-81

Manufacturing in QLD? That’s surely worth a gold medal

7min
pages 82-83

Samin Sheet Metal –New Amada Ensis laser

6min
pages 78-79

ONE ON ONE: Cori Stewart

15min
pages 74-77

OMAX: The recipe for faster cutting

3min
page 73

Frontline Manufacturing –New Deratech press brake

9min
pages 70-72

Postive signs for Addeva

4min
pages 68-69

Next-gen 3D-printed catalysts propel hypersonic flight

9min
pages 65-67

Medical applications expand limits of 3D printing

4min
page 64

Why manufacturers should embrace new tooling

6min
pages 62-63

Mecaprec: Flying high with Seco

3min
page 61

AM Hub case study: Cobalt Design

6min
pages 56-57

Iscar: Beneficial modularity

6min
pages 58-60

Locally manufactured hybrid school buses

6min
pages 52-53

TRANSPORT: Driving the economy, delivering jobs

11min
pages 46-49

INDUSTRY NEWS: Current news from the Industry

33min
pages 18-31

PRODUCT NEWS: Selection of new and interesting products

20min
pages 38-45

VOICEBOX: Opinions from across the manufacturing industry

22min
pages 32-37

Bombardier: On track for efficient production

6min
pages 50-51

From the CEO

4min
pages 12-13

From the Union

4min
pages 16-17

From the Industry

4min
pages 14-15
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.