MATERIAL REMOVAL
Innovative consumables for mass finishing operations Simple steps to improve finishing results, sustainability and efficiency. When it comes to achieving the required quality of products by surface refinement, mass finishing technology can be used for a broad range of different finishing tasks. With its comprehensive R&D activities, Rösler Oberflächentechnik GmbH continues to generate new technical highlights not only for the machine technology but also for the respective mass finishing consumables. Three recently introduced products make it possible to significantly improve the finishing results, the process consistency, the cost-efficiency and sustainability of mass finishing operations. At the same time, they open the door for new applications, for example, the finishing of complex, cup-shaped work pieces. Mass finishing technology can handle all kinds of surface finishing tasks ranging from the simple deburring/edge radiusing and surface grinding to high gloss polishing of mass- produced bulk goods and single components. It can even create special effects on the surface of the work pieces. Of course, like any other industrial processes, mass finishing operations must comply with all kinds of requirements such as high-quality standards, process stability, work piece traceability and cost-efficiency. More recently optimal resource use and sustainability have become a focal point in numerous industries. And finally, the rapidly growing automation and digitisation of manufacturing operations also calls for specially adapted solutions for mass finishing operations. For decades Rösler Oberflächentechnik GmbH has met these challenges with comprehensive research and development in the equipment sector as well as in the fields of process and automation technology and consumables. Rösler is producing all its consumables in-house. “We study the technical trends and requirements in numerous industries and markets extensively,” says Rüdiger Böhm, global R&D Manager at Rösler. “Our findings are then systematically utilised for the development of innovative products to provide a significant incremental value to our customers and to expand the application range for the mass finishing technology.”
MultiShape makes the impossible possible Such an innovation is the new MultiShape ceramic media. Compared to all other products currently available in the market, this media has a patented shape without any flat, parallel surface areas. On the one hand this unique design prevents media lodging in the work pieces, which can occur particularly in case of complex work pieces. Such lodged media can severely affect the finishing process and must frequently be removed by hand. On the other hand, the shape with its rounded surface allows the surface refinement of work pieces, which to-date could not be handled by mass finishing at all or only with very complicated operational setups. This includes components with difficult-to-reach surface areas like tight radii, undercuts, notches, and slits, which can frequently be found in stamped and bent components. The unusual ceramic media also allows the effective and homogeneous finishing of external and internal surface areas on tube segments and cupshaped components like housings and deep drawn parts. Compared to traditional ceramic media, the new product is also characterised by a faster and more dynamic motion of the work piece/media mix and a higher material removal rate. This results in up to 10% shorter finishing times. The new media represents a significant contribution towards higher productivity and costefficiency. Another important attribute of the MultiShape media are its uniform wear characteristics. This excellent shape retention feature allows a longer media use, which is positively affecting the operating costs. The grinding intensity can be adjusted to the respective finishing application through different ceramic compositions.
Mass finishing without foaming Unwanted foam is a common phenomenon in mass finishing processes with plastic media, even with foam-reduced media versions. Foaming can be problematic because, acting as a buffer between the work pieces and media, it reduces the grinding performance and material removal rate. This can diminish the process stability, and the processing aim can frequently no longer be achieved within the defined cycle time. Moreover, the foam containing metal and media fines contaminates the surface of the finished work pieces. The foam also causes a deterioration of the process water cleanliness, requiring a higher compound dosing rate and forcing the user to replace the process water more frequently. Last-but-not-least, foam discharged from the mass finishing machine contaminates the working environment. In the past the users tried to control the foaming by adding special chemical compounds. But this was not very successful, caused additional costs and reduced the process sustainability. With its non-foaming plastic media, the so-called “N” version, the R&D Department at Rösler has now developed a better solution. “Prior to introducing the product in the market, we conducted extensive field trials with special pilot users,” says Christian Höhn, Head of Technology Management at Rösler. “The trials proved convincingly that the non-foaming plastic media has the same grinding characteristics and performance as the standard product.” The trials also demonstrated that with the newly developed media, the mass finishing processes are running much more stable, and the required results are achieved in shorter cycle times. This positive effect regarding cost-efficiency and sustainability is augmented by a longer usable life of the media and process water and a reduced compound usage.” “Because of the disruptive foaming many users had been using ceramic media, even though this was not the best option. For these users the non-foaming plastic media version is a great opportunity to optimise their finishing processes,” concludes Höhn. All plastic media in the comprehensive Rösler portfolio are available in the non-foaming “N” version.
Dust-free drying with organic drying media The third new development in the consumables sector in 2021 allows a significant reduction of the dust occurring during drying processes utilising organic drying media such as maizorb. Even in small quantities the liquid, easily dispensable, Anti-Dust additive significantly reduces the formation of dust. Depending on the operating times and work pieces, the additive can be manually added or dosed fully automatically. The Anti-Dust additive is employed in drying operations for metal and plastic components, whenever organic drying media is used. Without negatively impacting the drying performance it guarantees absolutely spotfree surface finishes. At the same time, dust residues on the finished work pieces and the surrounding area are minimized. This also represents a huge step towards a clean, low-dust working environment. “Because it is purely organic and complies with the prevailing food standards, the Anti-Dust additive also represents a significant contribution towards a cleaner environment,” says Rainer Schindhelm, Division Manager of consumables production. Increasing the productivity of the mass finishing technology, improving overall sustainability and reducing CO2 emissions; these are the main goals of the development work at Rösler in the year 2022. Various solutions from the sectors equipment technology and consumables are already being tested by various customers. rosler.com
AMT AUG 2022
107
