MODEL - SPECIFIC INSTRUCTIONS
SYNCHRO CENTER AND SYNCHRO RENTAL BINDING TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.
WARNING : BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT TO ISO 5355 STANDARD
✖
✖
ISO 5355
WTR
✖
ISO 9523
Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above.
SOLE LENGTH ADJUSTMENT
Z & L SC (Synchro center) : 260mm – 384mm 1. Position the rental jig (ref. 001003 or 001040 for a fat ski rental) on the ski.
TECHNICAL MANUAL ALPINE 2020/21
PREPARATION It is important to maintain consistent procedures when mounting any Salomon binding. Any boot used with a Salomon rental binding must be visually inspected for compatibility. To use the Synchrosysteme you need: - Synchrosysteme jig references 001003 and 001040. - adjustment tool reference 000902.
2. Then drill through the jig’s proper bushings. Follow the same procedure as for retail bindings (drilling, tapping, glue). 3. Mount the premounted track assembly orienting the sticker toward the back of the ski (fig. 1). 4. Mount the heel aligning the holes, and tighten the screws (fig. 2). 5. Mount the brake according to the usual procedure.
The bindings that are compatible with the Synchrosysteme are the following: Z12 SC. Z10 SC. L10 SC. L 9 SC. L10 SR. L7 SC. L7 SR. T5 SC. C5 SR. The Synchrosysteme can be used with all Alpine boots (DIN, ISO 5355) from all brands. The measuring device can be used if skiers come in the shop with their boots on.
1
SYNCHRO RENTAL For mounting Synchro Rental bindings, follow the same procedure as for the retail bindings.
SYNCHRO CENTER
2
CONTENTS OF THE BOX
BINDING
› The heel mounted on a plate,
28
› The toe mounted on a sliding plate, › The position indicator, › The premounted track assembly with yellow screw (Adult skis). Caution: the toes mounted on the sliding plate are specific to RENTAL products. › Brake. summary <<<
>>>
