MODEL - SPECIFIC INSTRUCTIONS
EASYTRAK PLATE WITH LITHIUM BINDING TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.
WARNING : BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT TO ISO 5355 STANDARD
✖
✖
ISO 5355
WTR
✖
ISO 9523
WARNING THESE ALPINE BINDINGS ARE INTENDED TO BE USED ONLY WITH THE FOLLOWING SKI BOOTS: > Alpine ski boots compliant with ISO 5355 standard. Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above. SOLE LENGTH ADJUSTMENT
Ski Woman (W): 253mm – 320mm / Size L: 257mm – 380mm
MOUNTING & ADJUSTING
FRONT plate
TECHNICAL MANUAL ALPINE 2020/21
1. Use the Salomon mounting jig (ref:30863001) and drill the skis following the ski and binding manufacturer’s instructions. Mount the front and rear plate on the ski by tightening the screws at 4 N.m. ▼
REAR plate
BINDING
Below view
43 summary <<<
>>>
