N C5 GW BINDINGS TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.
BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT WITH ISO 5355 STANDARD AND SKI BOOTS EQUIPPED WITH « GRIPWALK » LABELLED KIT OF WALKING SOLES
✖ ISO 5355
✖
WTR
ISO 9523
WARNING THESE ALPINE BINDINGS ARE INTENDED TO BE USED ONLY WITH THE FOLLOWING SKI BOOTS: > Alpine ski boots compliant with ISO 5355 standard. > Ski boots equipped with « GripWalk » labelled kit of walking soles WITHOUT metal inserts Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above.
ALPINE SKI BOOTS (ISO 5355) TYPE A (Adult)
●
GRIPWALK BOOTS (ISO 9523)
TYPE C TYPE A (Children) (Adult)
●
NO NORM TYPE C (Children)
●
●
2. Screw the base, taking care to hold it so that it does not rotate. Then slide the toe until it comes into contact with the holder screw and tighten the 2 screws at 3 N.m
1
2
BINDING
1. For mounting N C5 GW binding on skis, holes have to be drilled with the Salomon mounting jig (ref L7840610001) to ensure a proper alignment of the binding.
TECHNICAL MANUAL ALPINE 2020/21
MOUNTING & ADJUSTING
53 summary <<<
>>>