MODEL - SPECIFIC INSTRUCTIONS
JUNIORTRAK PLATE WITH C5 GW BINDING TO BE MOUNTED BY A SALOMON AUTHORIZED DEALER ONLY.
BINDINGS INTENDED TO BE USED ONLY WITH ALPINE BOOTS COMPLIANT WITH ISO 5355 STANDARD AND SKI BOOTS EQUIPPED WITH « GRIPWALK » LABELLED KIT OF WALKING SOLES
✖
✖
WTR
ISO 5355
ISO 9523
WARNING THESE ALPINE BINDINGS ARE INTENDED TO BE USED ONLY WITH THE FOLLOWING SKI BOOTS: > Alpine ski boots compliant with ISO 5355 standard. > Ski boots equipped with "GripWalk" and with "GripWalk Junior" labelled kit of walking soles WITHOUT metal inserts Any use with other ski boots could cause the ski-binding-boot system to be faulty and affect release characteristics, which would increase the risk of serious injury while skiing. Therefore, skiers are warned not to use this product with any ski boots other than those meeting the standards indicated above. Skiers are advised to consult the dealer where this product was purchased, or an equipment specialist at any SALOMON authorized ski dealer of this product, for further information regarding which ski boots meet the standards listed above. ALPINE SKI BOOTS (ISO 5355)
Size XS (premounted in factory): 197mm – 257mm Size S: 220mm – 304mm
TYPE A (Adult) C5 GW
BINDING MODELS
●
GRIPWALK BOOTS (ISO 9523)
NO NORM
TYPE C TYPE A (Children) (Adult)
●
TYPE C (Children)
●
TECHNICAL MANUAL ALPINE 2020/21
SOLE LENGTH ADJUSTMENT
●
MOUNTING & ADJUSTING 1 - For mounting C5 GW binding on skis, holes have to be drilled with the Salomon mounting jig (ref 30863001) to ensure a proper alignment of the binding.
1
REAR
FRONT
Mount the front and the rear plate on ski by tightening the screws at 3 N.m (ski G3&G4)
S
S
BINDING
Drill bit length Length
Diameter
Skis
Diameter
Length Reference
Junior
4,1 mm
8 mm
000813
Ski Group 3 & 4
3,6 mm
8 mm
000814
summary <<<
Aspect
57
>>>