Modifying fade and wait times If you do not assign fade and wait times to a part, the console assigns default times.23 No wait time will be recorded. Follow these steps to assign fade and wait times to parts to a multipart cue: Keystrokes:
Action:
1. Press [Blind].
Selects Blind display mode
2. Enter the cue number.
Prompt reads: Select cue number To select cue type, press TYPE
3. Press [S7], More Softkeys, until Part appears as softkey [S1].
Finds the Part softkey
4. Press [S1], Part, then press [+] or [-] until the part you want to edit is displayed.
Prompt reads: Select part number
5. Press [Time].
Prompt reads: Enter upfade time
6. Enter an upfade time between .1 second and 99:59 minutes and press [Enter].
Prompt reads: Enter downfade time
7. If you want a downfade time that is different from the upfade, enter the desired time and press [Enter]. If not, just press [Enter].
Fade times are set for the part
8. Press [Wait].
Prompt reads: Enter wait time
9. Enter wait time and press [Enter]. Wait time is the delay between when you press [Go] and when the part begins. If you do not enter a wait time, the console assigns a wait time of zero.
Wait time is set for the part
23.
Chapter 9 Multipart cues
See Setting default fade times, page 24. 117
