Submaster LEDs Each submaster bump button contains an LED. The state of the LED indicates the current state of that submaster, as shown in the chart below: Color
State
Meaning
––
Off
Submaster not loaded.
Green
Solid
Submaster (pile-on or effect) loaded.
Green
Slow Blink
New pile-on or effect submaster. Loads when slider reaches home position.
Green
Fast Blink
Submaster (pile-on or effect) on timed hold. Press bump button to begin downfade.
If the LED on a slider is blinking slowly, it means that you have changed pages and a new submaster is waiting to load. The old submaster stays loaded until you move the slider to the home position. When the slider reaches home, the channel levels from the new page replace the old levels.
Note: If a submaster slider has both a submaster loading and a submaster on hold, the submaster on hold takes priority and the LED blinks fast. Press the bump button to downfade the old submaster.
156
Chapter 13 Submasters
