Inserting a link Use the edit features softkey [S5], Insert Link, to insert an empty link number ahead of the selected or specified link. All subsequent links will be renumbered.
Note: The order in which links are recorded does not affect their operation. However, your numbering may be useful to you in terms of logical organization. To insert a link, follow these steps: Keystrokes:
Action:
1. Press [Setup] [1][1] [Enter].
Selects Channel Attributes display
2. Press [S7], Link List.
Selects Link List display Prompt reads: Select link number
3. Press [S5], Insert Link.
Prompt reads: Select link number to insert, then press ENTER. To cancel, press CLEAR.
4. Press [1] [Enter].
Selects link 1 to insert. All links higher than 1, up to the first gap in the Link List (if any), are renumbered to make room Prompt reads: Select X wheel channel number (Precede with AND to add to existing link, or EXCEPT to delete from link)
5. Proceed with normal link entry.a a.
240
See Setting up a link, page 239.
Chapter 19 Link lists
